Sauter Marapi Electric Towel Dryer Radiator User Manual

1. Introducció

Thank you for choosing the Sauter Marapi Electric Towel Dryer Radiator. This manual provides essential information for the safe installation, operation, and maintenance of your appliance. Please read these instructions carefully before use and retain them for future reference.

The Sauter Marapi is designed to provide comfortable heating and efficient towel drying, featuring a powerful blower, an intuitive LCD screen, and programmable settings for optimal energy management.

2. Instruccions de seguretat

Important: Si no es segueixen aquestes instruccions de seguretat, es poden produir descàrregues elèctriques, incendis o lesions personals.

• This appliance is intended for domestic use only as a towel dryer and supplementary heater.
• Installation must be carried out by a qualified electrician in accordance with local wiring regulations and building codes, especially in bathrooms.
• Do not install the appliance directly below a socket outlet.
• Assegureu-vos que la font d'alimentació voltagcoincideix amb l'etiqueta de classificació de l'aparell.
• Do not cover the radiator or blower vents, as this can cause overheating and fire.
• Keep children and pets away from the appliance when it is in operation, as surfaces can become hot.
• No submergiu l'aparell en aigua o altres líquids.
• Si el cable d'alimentació està danyat, l'ha de substituir el fabricant, el seu agent de servei o persones qualificades de manera similar per evitar perills.
• Aquest aparell no està pensat per ser utilitzat per persones (inclosos nens) amb capacitats físiques, sensorials o mentals reduïdes, o amb manca d'experiència i coneixements, tret que hagin rebut la supervisió o instruccions sobre l'ús de l'aparell per una persona responsable de la seva seguretat.

3. Producte acabatview

The Sauter Marapi combines a stylish design with practical functionality. Familiarize yourself with the main components:

• Elements de calefacció: Horizontal round tubes for towel drying and radiant heat.
• Ventilador: Located at the bottom, provides rapid heat for quick room warming.
• Tauler de control LCD: Displays temperature, mode, and programming settings.
• Botons de control: For adjusting settings and navigating menus.

Figure 3.1: Sauter Marapi Electric Towel Dryer Radiator in a bathroom setting. This image shows the radiator mounted on a wall next to a sink and mirror, highlighting its integration into a modern bathroom environment. The radiator features multiple horizontal bars for hanging towels and a control panel on the upper right side.

Figura 3.2: Frontal view of the Sauter Marapi Electric Towel Dryer Radiator. This image provides a clear, head-on view de l'aparell, mostraasing its white finish, numerous round horizontal heating tubes, and the integrated LCD control panel on the right side. Three circular elements are visible at the top.

Figura 3.3: Angle view of the Sauter Marapi Electric Towel Dryer Radiator. This perspective highlights the depth of the radiator and the design of its round heating tubes, which are suitable for hanging and drying towels. The LCD control panel is also visible on the side.

4. Configuració i instal·lació

The Sauter Marapi radiator must be securely mounted to a wall and connected to the electrical supply. Due to the electrical nature and bathroom environment, professional installation is strongly recommended.

4.1 Muntatge

• Choose a suitable wall location, ensuring adequate clearance from water sources (sinks, showers, bathtubs) as per local regulations (e.g., volume zones in bathrooms).
• Use the provided mounting bracket and hardware. Mark the drilling points accurately.
• Drill holes and insert appropriate wall plugs. Secure the mounting bracket firmly to the wall.
• Carefully lift the radiator and attach it to the mounting bracket. Ensure it is level and stable.

4.2 Connexió elèctrica

• Avís: Disconnect power at the main circuit breaker before attempting any electrical work.
• The appliance must be connected to a permanent electrical installation by a qualified electrician.
• Assegureu-vos una correcta connexió a terra.
• The electrical connection should be protected by a residual current device (RCD) if required by local regulations.

5. Instruccions de funcionament

After proper installation and power connection, you can begin operating your Sauter Marapi radiator.

5.1 Encès/Apagat

• Premeu el botó Poder button on the control panel to turn the appliance on or off.
• The LCD screen will illuminate when the unit is powered on.

5.2 Pantalla LCD i controls

The LCD screen displays current temperature, operating mode, and programming status. Use the navigation buttons (e.g., Mode, +/-, prog) to adjust settings.

5.3 Modes de funcionament

Your radiator typically offers several operating modes:

• Mode de confort: Maintains a set temperature for continuous comfort.
• Mode Eco: Manté una temperatura més baixa i estalvia energia.
• Mode de protecció contra gelades: Prevents the room temperature from dropping below a critical level (e.g., 7°C).
• Mode de programa: Follows a pre-set heating schedule.
• Blower Boost Mode: Activates the integrated blower for rapid heating for a set duration (e.g., 15-30 minutes).

Premeu el botó Mode button to cycle through available modes. Use the +/- buttons to adjust the target temperature in Comfort or Eco modes.

5.4 Programació

The programmable feature allows you to set specific heating schedules for different times of the day and days of the week.

1. Premeu el botó prog botó per entrar al mode de programació.
2. Utilitza el Mode or arrow buttons to select the day and time segment you wish to program.
3. Utilitza el +/- buttons to set the desired mode (Comfort, Eco, Off) for that segment.
4. Repeat for all desired time segments and days.
5. Premeu prog again to exit and save the settings.

Refer to the detailed programming section in your full manual for advanced options and specific button functions.

6. Manteniment

Regular cleaning ensures optimal performance and extends the lifespan of your radiator.

• Neteja: Before cleaning, ensure the appliance is switched off and disconnected from the power supply. Allow it to cool completely. Wipe the surfaces with a soft, damp drap. No utilitzeu netejadors abrasius, dissolvents ni productes químics agressius, ja que poden danyar l'acabat.
• Blower Filter (if applicable): Some models may have a removable filter for the blower. Check your specific model's instructions for cleaning or replacing this filter.
• Inspecció general: Periodically check the power cord and plug for any signs of damage. If damage is found, contact a qualified technician for repair.

7. Solució De Problemes

If you encounter issues with your Sauter Marapi radiator, consult the following table before contacting customer support.

8. Especificacions

• Marca: Sauter
• Model: Marapi
• Número de model: 3410532201757
• Tipus: Electric Towel Dryer Radiator with Blower
• Potència de sortida: 1750 watts
• Control: LCD Screen, Programmable
• Pes: Aproximadament 27.25 kg
• ASIN: B07HGPKKJD

9. Garantia i Suport

For warranty information, please refer to the warranty card included with your product or visit the official Sauter weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

If you require technical assistance, spare parts, or have questions not covered in this manual, please contact Sauter customer support. Contact details can typically be found on the manufacturer's weblloc web o a l'embalatge del producte.

Sauter Official Weblloc: www.sauter.fr (Si us plau, verifiqueu la regió correcta) weblloc web per obtenir suport.)