Stanley FATMAX 850W 115mm Corded Angle Grinder

1. Producte acabatview

The Stanley FATMAX FMEG210K-QS is a powerful and robust 850W 115mm corded angle grinder designed for intensive use. It features a durable metal casing, high-quality carbon brushes, and a comfortable grip coating for enhanced user experience. This tool is equipped with an anti-restart system for increased safety during operation.

Figure 1: Stanley FATMAX Angle Grinder FMEG210K-QS with its included carrying case.

Components:

• Angle Grinder Body: The main unit housing the motor and gears.
• Mànec lateral: A 3-position auxiliary handle for improved control and comfort.
• Guàrdia: Protects the user from sparks and debris. Includes both open and closed guards.
• Botó de bloqueig de l'eix: S'utilitza per bloquejar el fus per facilitar els canvis de disc.
• Interruptor d'alimentació: Equipped with an anti-restart system for safety.
• Integrated Wrench: Stored within the side handle for convenient disc tightening.
• Carbon Brush Access: Easy access for maintenance of carbon brushes.

Figure 2: Close-up of the angle grinder, showing the main body, side handle, and guard.

2. Instruccions de seguretat

Observeu sempre les precaucions de seguretat bàsiques per reduir el risc d'incendi, descàrrega elèctrica i lesions personals. Llegiu totes les instruccions abans d'utilitzar aquesta eina.

Seguretat general de les eines elèctriques:

• Seguretat de l'àrea de treball: Mantingueu la zona de treball neta i ben il·luminada. No feu servir eines elèctriques en atmosferes explosives, com ara en presència de líquids, gasos o pols inflamables.
• Seguretat elèctrica: Eviteu el contacte corporal amb superfícies connectades a terra. No exposeu les eines elèctriques a la pluja ni a condicions humides.
• Seguretat personal: Always wear eye protection (safety goggles), hearing protection, and appropriate respiratory protection. Use personal protective equipment such as non-skid safety shoes and a hard hat when necessary. Dress properly; do not wear loose clothing or jewelry.
• Ús i cura de l'eina: No forceu l'eina elèctrica. Feu servir l'eina elèctrica adequada per a la vostra aplicació. Desconnecteu l'endoll de la font d'alimentació abans de fer qualsevol ajust, canviar accessoris o guardar eines elèctriques.

Angle Grinder Specific Safety:

• Guàrdies: Always use the appropriate guard for the type of operation. Ensure the guard is securely attached and positioned for maximum safety.
• Discs: Use only discs that are rated for the maximum RPM of the grinder (12000 rpm). Inspect discs for damage before use.
• Tornar-s'hi: Be aware of kickback, which is a sudden reaction to a pinched or snagged rotating wheel. Always maintain a firm grip on the tool.
• Anti-Restart System: This grinder is equipped with an anti-restart system. If power is interrupted during operation, the tool will not restart automatically when power is restored. You must manually cycle the power switch to restart the tool.
• Ventilació: Do not block the ventilation openings. Keep them clean to prevent overheating.

3. Configuració

3.1 Desembalatge:

Carefully remove the angle grinder and all accessories from the carrying case. Inspect for any damage that may have occurred during shipping. Keep the packaging for future storage or transport.

3.2 Attaching the Side Handle:

The side handle can be screwed into one of three positions on the grinder head, depending on your preference and the application. Ensure it is tightened securely before use.

3.3 Installing/Changing Grinding Discs:

1. Assegureu-vos que l'eina estigui desconnectada de la font d'alimentació.
2. Manteniu premut el botó de bloqueig de l'eix.
3. Use the integrated wrench (located in the side handle) to loosen the outer flange nut by turning it counter-clockwise.
4. Remove the outer flange nut and the old disc.
5. Place the new disc onto the inner flange, ensuring it is seated correctly.
6. Replace the outer flange nut and tighten it clockwise using the integrated wrench while holding the spindle lock button. Do not overtighten.

3.4 Adjusting the Guard:

The guard can be rotated to provide optimal protection for your specific cutting or grinding task. Loosen the guard clamp screw, rotate the guard to the desired position, and then securely tighten the clamp cargol.

4. Funcionament

Before operating, ensure all safety precautions are followed and the correct disc and guard are installed for your task.

4.1 Encendre/apagar:

• To turn on, slide the power switch forward.
• To turn off, slide the power switch backward.

4.2 Proper Grip and Posture:

Always hold the grinder firmly with both hands, one on the main handle and one on the side handle. Maintain a balanced stance and keep your body clear of the rotating disc's path.

4.3 Grinding and Cutting Techniques:

• Tall: For cutting operations, use a thin cutting disc. Apply light, consistent pressure and allow the disc to do the work. Avoid twisting or binding the disc in the cut.

Figure 3: Demonstrating cutting a stone slab with the angle grinder.

Figure 4: The angle grinder in action, cutting a metal pipe with sparks.

Figure 5: Using the angle grinder to precisely cut a ceramic tile.

• Mòlta superficial: For surface grinding, use a thicker grinding disc. Hold the grinder at a slight angle (typically 15-30 degrees) to the workpiece. Move the grinder smoothly across the surface, applying even pressure.

Figure 6: Grinding the surface of a ceramic tile with the angle grinder.

Figure 7: The angle grinder being used to grind the edge of a metal shovel.

4.4 Material Considerations:

Always use the correct type of disc for the material you are working on (e.g., metal, stone, tile). Different materials require different disc compositions and techniques.

5. Manteniment

Regular maintenance ensures the longevity and safe operation of your angle grinder. Always unplug the tool before performing any maintenance.

• Neteja: Regularly clean the tool's ventilation slots to prevent dust buildup, which can lead to overheating. Use a soft brush or compressed air. Wipe the exterior with a damp tela. No utilitzeu productes químics durs.
• Inspecció/substitució de raspalls de carbó: The high-quality carbon brushes are designed for durability. If the tool experiences reduced power or intermittent operation, the carbon brushes may need inspection or replacement. Access ports are designed for easy maintenance. Refer to a qualified service technician if unsure.
• Substitució del disc: Replace worn or damaged discs immediately. Never use a disc that is cracked, chipped, or bent.
• Inspecció del cable: Periodically inspect the power cord for any signs of damage, cuts, or fraying. If damaged, have it repaired by a qualified professional.
• Emmagatzematge: Store the grinder in its original carrying case in a dry, secure place, out of reach of children.

6. Solució De Problemes

Aquesta secció tracta problemes comuns que podeu trobar amb la vostra esmoladora angular.

If the problem persists after attempting these solutions, please contact Stanley customer support or a qualified service center.

7. Especificacions

Technical specifications for the Stanley FATMAX FMEG210K-QS Angle Grinder:

8. Garantia i Suport

For warranty information, service, or technical support, please refer to the documentation provided with your purchase or visit the official Stanley weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.

While specific spare parts availability information is not provided, Stanley generally offers support for their products. For any repair or replacement of parts, it is recommended to use genuine Stanley parts and have the work performed by authorized service personnel.

For returns, please refer to the retailer's return policy, which for this product is typically 30 days from the date of purchase.