Audiovox 91P

Audiovox 4-Button Transmitter 434Mhz (Model 91P) User Manual

For Prestige Security Systems

1. Introducció

This manual provides instructions for the Audiovox 4-Button Transmitter, Model 91P, operating at 434Mhz. This device is designed as a replacement one-way remote control for select Prestige Security Systems. It features a four-button design for various functions.

Nota important de compatibilitat: This transmitter is compatible with Prestige APS101N, APS101, APS45C, APS45N, APS620N, and APS44HJ systems. Always verify your system's model number to ensure compatibility. Do not rely solely on visual appearance for model identification.

Audiovox 4-Button Transmitter 434Mhz remote control

Image: The black Audiovox 4-Button Transmitter. It features four circular buttons: a blue lock icon, a blue unlock icon, a green button with a key and slash icon (likely panic/trunk release), and a gray 'OPTION' button. A small red LED indicator is visible above the buttons. The word 'PRESTIGE' is embossed below the buttons.

2. Configuració i programació

To enable your new Audiovox 4-Button Transmitter to control your Prestige Security System, it must be programmed to the system's receiver. The programming procedure typically involves accessing the system's programming mode and then transmitting a signal from the new remote.

Passos generals de programació:

  1. Locate the System's Programming Button: This button is often found on the control module of your Prestige Security System. It may be labeled 'Program', 'Valet', or be a small push-button switch. Refer to your vehicle's or security system's specific installation manual for its exact location.
  2. Introduïu el mode de programació: Turn the vehicle's ignition to the ON position. Within a few seconds, press and release the programming button a specific number of times (e.g., three times). The system will usually respond with a chirp or horn honk to indicate it has entered programming mode.
  3. Transmit from New Remote: While the system is in programming mode, press and hold the LOCK button on your new Audiovox 4-Button Transmitter for approximately one second, then release. The system should respond with another chirp or honk, confirming the remote has been learned.
  4. Program Additional Remotes (if applicable): If you have additional transmitters to program, repeat step 3 for each remote.
  5. Sortir del mode de programació: Turn the vehicle's ignition to the OFF position. The system will exit programming mode automatically. Test all programmed remotes to ensure proper function.

Note: Specific programming steps may vary slightly depending on your Prestige Security System model. Always consult the original system's manual for precise instructions. If you encounter difficulties, professional installation or assistance from an authorized dealer is recommended.

3. Funcionament

The Audiovox 4-Button Transmitter provides convenient control over your Prestige Security System's primary functions. The remote features a red LED indicator that illuminates when a button is pressed, confirming signal transmission.

Funcions del botó:

4. Manteniment

Proper care and maintenance will ensure the longevity and reliable operation of your Audiovox 4-Button Transmitter.

Substitució de la bateria:

The transmitter is powered by a small coin-cell battery (type typically CR2032 or similar, though not specified in product data). When the remote's range decreases significantly or the LED indicator fails to light up, it's time to replace the battery.

  1. Separeu amb cura les dues meitats del comandament a distància.asing, often by using a small flat-head screwdriver in the seam.
  2. Remove the old battery, noting its orientation (+/-).
  3. Insert a new, fresh battery with the correct polarity.
  4. Agafeu el comandament a distància casintorneu a unir-se de manera segura.

Atenció general:

5. Solució De Problemes

If your Audiovox 4-Button Transmitter is not functioning as expected, consider the following troubleshooting steps:

If these steps do not resolve the issue, contact an authorized Audiovox or Prestige dealer for further assistance.

6. Especificacions

Número de model91P
MarcaAudiovox
ID de la FCCTBQT144
Freqüència434 Mhz
Nombre de botons4
Tipus1-Way Remote Control Transmitter
Indicador LEDVermell
Sistemes compatiblesPrestige APS101N, APS101, APS45C, APS45N, APS620N, APS44HJ
Dimensions del paquet7 x 4 x 1 polzades
Pes de l'article2.24 unces
ColorNegre

7. Garantia i Suport

For warranty information and technical support, please refer to the documentation provided with your original Prestige Security System or contact Audiovox customer service or an authorized dealer. Specific warranty terms may vary based on purchase location and date.

Fabricant: Audiovox

Data de primera disponibilitat: 21 de febrer de 2019

Documents relacionats - 91P

Preview Audiovox 5BCR/5BCR03/5BCR05 Programming Guide
This programming guide provides instructions for setting up and using the Audiovox 5BCR, 5BCR03, and 5BCR05 car alarm and remote start systems. It details transmitter programming, channel configuration, erasing lost transmitters, and battery replacement procedures.
Preview Manual d'usuari de l'Audiovox CDM-4500: CDMA/ de mode dualAMPTelèfon mòbil de mà S
Exploreu les característiques i el funcionament de l'Audiovox CDM-4500, un dispositiu CDMA/ de mode dual.AMPTelèfon mòbil portàtil S. Aquest manual d'usuari proporciona instruccions detallades sobre la configuració, l'ús, la gestió de la llibreta d'adreces i les funcions avançades.
Preview Manual d'usuari de l'Audiovox CDM-9000: característiques, funcionament i especificacions
Manual d'usuari complet per a l'Audiovox CDM-9000 Tri-Mode CDMA/AMPTelèfon mòbil portàtil S. Aprèn sobre les seves característiques, configuració del sistema, funcionament, agenda telefònica, missatgeria i més.
Preview Audiovox FR-130 Two-Way Family Radio Owner's Manual
This manual provides instructions for operating the Audiovox FR-130 Two-Way Family Radio, including features, controls, battery installation, operation, and warranty information.
Preview Audiovox PRO-9175FT4 4-Channel Remote Start and Keyless Entry System Installation Manual
Detailed installation instructions and wiring guide for the Audiovox PRO-9175FT4 4-Channel Remote Start and Keyless Entry System, covering component installation, wiring connections, and feature programming.
Preview AUDIOVOX AXC 571 Owner's Manual - Setup and Operation Guide
Comprehensive guide for the AUDIOVOX AXC 571 audio system. Learn how to set up, operate, and troubleshoot your device with detailed instructions and safety information.