1. Introducció
The Cecotec Conga 950 is a professional 4-in-1 robot vacuum cleaner designed to vacuum, sweep, mop, and scrub your floors. Equipped with iTech Space technology for intelligent navigation and a powerful Force Implode system, it ensures thorough cleaning across various surfaces. This manual provides essential information for setting up, operating, and maintaining your Conga 950 to ensure optimal performance and longevity.

Figura 1.1: superior view of the Cecotec Conga 950 robot vacuum cleaner, showcasinel seu disseny elegant i els botons de control.
2. Característiques clau
- Funcionalitat 4 en 1: Vacuums, sweeps, mops, and scrubs simultaneously.
- Force Implode System: Maximizes suction power up to 1400 Pa for deep cleaning.
- Múltiples nivells de potència: Features 3 cleaning power levels: Eco, Normal, and Turbo.
- 5 modes de neteja: Includes Auto, Edges, Room, Spiral, and Back to Base modes to adapt to different cleaning needs.
- iTech Space Technology: Intelligent navigation system with proximity, shock, and anti-fall sensors for efficient movement and obstacle avoidance.
- Filtre EPA: Purifies the air by retaining allergens and dust particles.
- Wash4You System: Allows for easy mopping and scrubbing by simply installing the liquid tank.
- Twin Floor Mop: Designed with two materials for perfect cleaning on all floor types.
- Turbo Clean Carpet System: Provides a turbo mode specifically for carpets.
- Dual Tanks: Equipped with a 350 ml dust tank and a 200 ml liquid tank.
- Only Silence Technology: Ensures quiet operation during cleaning cycles.
- All-TimeTable Programming: Schedule cleaning 24 hours a day, 7 days a week, via the LCD remote control.
- Autonomia llarga: Lithium-ion battery (14.4 V, 2600 mAh) provides up to 160 minutes of continuous cleaning.
3. Components
Before first use, ensure all components are present and undamaged:
- Robot aspirador Cecotec Conga 950
- Base de càrrega
- Adaptador d'alimentació
- Remote Control with LCD screen
- Raspalls laterals (2 parells)
- Pinzell principal
- Dust Tank (350 ml)
- Liquid Tank (200 ml)
- Draps de fregona
- Eina de neteja
- EPA Filter (pre-installed)
4. Configuració
- Desempaquetar el robot: Carefully remove all packaging materials and protective films from the robot and its accessories.
- Instal·leu els raspalls laterals: Attach the two side brushes to their respective slots on the bottom of the robot until they click into place.
- Place Charging Base: Position the charging base against a wall in an open area, ensuring there are no obstacles within 1 meter to the sides and 2 meters in front. Connect the power adapter to the charging base and plug it into a power outlet.
- Càrrec inicial: Place the robot on the charging base. Ensure the charging contacts on the robot align with those on the base. The indicator light on the robot will show charging status. For first use, charge the robot completely (approximately 3 hours).
- Prepare Tanks: For vacuuming, ensure the dust tank is correctly inserted. For mopping, fill the liquid tank with water (and a small amount of neutral cleaning solution if desired) and attach the mop cloth before inserting it into the robot.
5. Instruccions de funcionament
5.1 Engegada/apagada
- Encès: Premeu el botó d'engegada del robot o del comandament a distància. L'indicador lluminós s'il·luminarà.
- Apagar: Press and hold the power button on the robot or the remote control until the indicator light turns off.
5.2 modes de neteja
Select a cleaning mode using the remote control:
- Mode automàtic: El robot neteja automàticament, adaptant-se a l'entorn.
- Mode de vores: El robot neteja les parets i les vores dels mobles.
- Mode d'habitació: Ideal for cleaning a single room. The robot will focus its cleaning within that area.
- Spiral Mode: The robot cleans in a spiral pattern, suitable for concentrated dirty areas.
- Back to Base Mode: The robot automatically returns to its charging base.

Figure 5.1: Using the remote control to operate the Conga 950, showing its LCD screen and control buttons.
5.3 Programming (All-TimeTable)
Use the remote control's LCD screen to set a cleaning schedule for specific times and days of the week. Refer to the remote control section in the full manual for detailed programming steps.
5.4 Mopping Function (Wash4You)
To activate the mopping function, ensure the liquid tank is filled and the mop cloth is attached. Insert the tank into the robot. The electronic valve will intelligently dose and distribute water evenly for effective scrubbing.

Figure 5.2: The Conga 950 effectively cleaning a floor with visible debris, highlighting its powerful suction and sweeping action.

Figure 5.3: An illustration of the Conga 950's intelligent navigation, showing various cleaning patterns across different rooms.
6. Manteniment
Regular maintenance is crucial for the optimal performance and lifespan of your Conga 950.
6.1 Dipòsit i filtre de pols
- Buidat: Empty the dust tank after each cleaning cycle or when full.
- Filtre de neteja: Tap the EPA filter to remove dust. Rinse the filter and dust tank with water if necessary, ensuring they are completely dry before re-inserting. Replace the EPA filter every 3-6 months depending on usage.
Pinzells 6.2
- Pinzell principal: Remove the main brush cover and lift out the brush. Use the provided cleaning tool to remove hair and debris. Clean the brush bearings.
- Raspalls laterals: Regularly check and clean the side brushes for tangled hair or debris. Replace them if they become worn or damaged.
6.3 Dipòsit d'aigua i drap de fregona
- Emptying and Cleaning: After mopping, empty any remaining water from the liquid tank. Rinse the tank thoroughly.
- Drap de fregona: Remove the mop cloth and wash it by hand or machine. Allow it to air dry completely before re-attaching.
6.4 Sensors i contactes de càrrega
- Wipe the anti-fall sensors, proximity sensors, and charging contacts on both the robot and the charging base with a dry, soft cloth to ensure proper function.
7. Solució De Problemes
If you encounter issues with your Conga 950, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| El robot no s'encén. | Bateria baixa; botó d'engegada no premut correctament. | Charge the robot fully; Press and hold the power button until it turns on. |
| El robot no es carrega. | Els contactes de càrrega estan bruts; la base de càrrega no té alimentació. | Clean charging contacts on robot and base; Ensure charging base is plugged in and powered. |
| Mal rendiment de neteja. | Dust tank full; Brushes tangled; Filter clogged. | Empty dust tank; Clean main and side brushes; Clean or replace EPA filter. |
| El robot es queda encallat sovint. | Obstacles en el camí de neteja; Els sensors estan bruts. | Netegeu els cables, les catifes i els objectes petits; netegeu tots els sensors. |
| El robot no torna a la base de càrrega. | Charging base is blocked or out of reach; Low battery. | Ensure clear path to base; Place base in an open area; Manually place robot on base if battery is critically low. |
8. Especificacions
| Característica | Detall |
|---|---|
| Marca | Cecotec |
| Nom del model | Conga 950 |
| Número de model | Conga Serie 950 (05107) |
| Dimensions (L x A x A) | 45.5 x 13 x 49 cm |
| Pes | 4.8 quilos |
| Voltage | 14.4 Volts |
| Potència d'aspiració | Fins a 1400 Pa |
| Nivell de soroll | 64 dB |
| Capacitat del dipòsit de pols | 350 ml |
| Liquid Tank Capacity | 200 ml |
| Tipus de bateria | Ió de liti (2600 mAh) |
| Durada de la bateria | Fins a 160 minuts |
| Tipus de filtre | EPA (Cloth) |
| Tipus de control | Control remot |
| Compatibilitat | Smartphone (via app, if available for this model) |





