Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your OPTONICA FL5848 LED Floodlight with integrated motion sensor. This slim 30W LED floodlight ensures reliable and uniform illumination. Its aluminum body is corrosion-resistant and designed to withstand adverse weather conditions. With an IP65 protection rating, the LED floodlight is suitable for outdoor and humid environments.
Instruccions de seguretat
Llegiu atentament aquestes instruccions de seguretat abans de la instal·lació i el funcionament. Si no seguiu aquestes instruccions, podeu patir descàrregues elèctriques, incendis o altres perills.
- Assegureu-vos que la font d'alimentació estigui desconnectada abans de la instal·lació o el manteniment.
- La instal·lació l'ha de fer un electricista qualificat.
- No mireu directament a la font de llum LED quan estigui encesa.
- No modifiqueu el producte de cap manera.
- Mantenir allunyat de materials inflamables.
Contingut del paquet
Verifiqueu que tots els components siguin presents al paquet:
- OPTONICA FL5848 LED Floodlight (non-replaceable bulb)
- Suport de muntatge
- Manual d'instruccions (aquest document)
Configuració i instal·lació
Segueix aquests passos per a una instal·lació correcta del teu focus LED:
- Trieu una ubicació: Select a suitable outdoor location for mounting. The recommended mounting height is 1.8 to 2.5 meters for optimal motion sensor performance. Ensure the area is clear of obstructions that might block the sensor's field of view.
- Desconnexió d'alimentació: Before starting any electrical work, ensure the main power supply to the installation area is turned off at the circuit breaker.
- Muntatge del suport: Use appropriate screws and wall plugs (not included) to securely fasten the mounting bracket to the desired surface. The bracket allows for angle adjustment.
- Connexió del cablejat: Connect the floodlight's power cable (approx. 25 cm) to your main electrical supply. Ensure correct polarity (Live, Neutral, Earth). All connections must be secure and insulated. This product operates on 170-265V, 50-60Hz.
- Attach the Floodlight: Secure the floodlight to the mounted bracket using the provided hardware. Adjust the angle of the floodlight to illuminate the desired area.
- Restauració d'energia: Un cop finalitzada la instal·lació i totes les connexions siguin segures, restableix l'alimentació del circuit.
Imatge: Part posterior view of the floodlight, illustrating the heat sink fins and the sturdy mounting bracket. The cable entry point is visible, emphasizing the need for secure wiring.
Instruccions de funcionament
The OPTONICA FL5848 features an integrated motion sensor with adjustable settings. The sensor has a detection angle of 120° and a detection range of 5-15 meters.
Configuració del sensor de moviment:
The motion sensor unit has three adjustable knobs:
Imatge: Detallada view of the motion sensor's adjustment knobs. From left to right, these are typically for TIME, SENS (Sensitivity), and LUX (Light Level).
- TEMPS (Temps de retard): This knob controls how long the light stays on after motion is detected and no further motion is sensed. Adjustable from 12 seconds to 6 minutes. Turn clockwise to increase the duration.
- SENS (sensibilitat): This knob adjusts the detection range of the motion sensor, from 5 to 15 meters. Turn clockwise to increase sensitivity and detection range.
- LUX (Light Level): This knob determines the ambient light level at which the sensor will activate the floodlight.
- Turn towards the "sun" symbol (max LUX, 2000 Lux) for the light to activate during both day and night.
- Turn towards the "moon" symbol (min LUX, 3 Lux) for the light to activate only in low light conditions or darkness.
Prova del sensor: After installation, set the TIME to minimum and LUX to maximum (sun symbol). The light should turn on when motion is detected. Once satisfied with the detection, adjust TIME and LUX to your desired operational settings.
Manteniment
The OPTONICA FL5848 LED Floodlight is designed for minimal maintenance. However, regular cleaning can help maintain optimal performance and appearance.
- Neteja: Periodically clean the floodlight's surface and the motion sensor lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or sensor.
- Inspecció: Occasionally check the mounting bracket and wiring connections for any signs of wear, corrosion, or loosening. Ensure the floodlight is securely fastened.
- Vida útil LED: The LED light source is designed for a long lifespan (average 25,000 hours) and is not replaceable. If the LEDs fail, the entire unit should be replaced.
For information on recycling and cleaning broken lamps, please refer to relevant local guidelines or visit the provided links:
Resolució de problemes
If you encounter issues with your OPTONICA FL5848 LED Floodlight, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | Sense font d'alimentació. LUX setting too low (daylight). El sensor no detecta moviment. | Comproveu la connexió d'alimentació i l'interruptor. Adjust LUX knob towards "sun" symbol. Check SENS setting and ensure no obstructions. |
| La llum es manté encesa contínuament. | Moviment constant a la zona de detecció. L'ajust de TIME és massa llarg. Funcionament del sensor. | Clear detection area. Adjust TIME knob to a shorter duration. Poseu-vos en contacte amb l'atenció al client si el problema persisteix. |
| La llum parpelleja o és tènue. | Font d'alimentació inestable. Cablejat danyat. | Consult a qualified electrician to check power supply. Inspect wiring for damage (with power off). |
| Sensor not detecting motion effectively. | Configuració SENS massa baixa. Mounting height incorrect. Obstructions in detection path. | Adjust SENS knob to increase sensitivity. Ensure mounting height is 1.8-2.5m. Remove any objects blocking the sensor's view. |
Especificacions
Detailed technical specifications for the OPTONICA FL5848 LED Floodlight:
- Model: FL5848
- Marca: Optònica
- Potència: 30 W
- Vol. Operatiutage: 170-265 V, 50-60 Hz
- Temperatura de color de la llum: 4500 K (Blanc neutre)
- Flux lluminós: 2250 lm
- Eficàcia lluminosa: 85 lm/W
- Índex de reproducció del color (CRI): > 70 Ra
- Angle del feix: 100°
- Detector de moviment: Sí
- Angle de detecció: 120°
- Interval de detecció: 5-15 m (adjustable)
- Delay Time (TIME): 12 sec - 6 min (adjustable)
- Light Value (LUX): 3-2000 Lux (ajustable)
- Alçada de muntatge: 1.8-2.5 m
- Regulable: No
- Canvi de cicle: 100,000
- Vida mitjana: 25,000 hores
- Factor de potència: > 0.9
- Tipus de protecció: IP65
- Hora d'inici: <1 s
- Contingut de mercuri: 0.0 mg
- Interval de temperatura: -30 °C a +50 °C
- Longitud del cable de connexió: Aprox. 25 cm
- Material: Alumini
- Color: Blanc
- Dimensions (L x A x P): 180 x 145 x 32 mm
- Classe d'eficiència energètica: A+
- Consum d'energia ponderat: 30 kWh / 1000 h
Image: The Optonica FL5848 LED Floodlight, showcasing its compact design and integrated motion sensor unit at the bottom.
Garantia i Suport
OPTONICA products are manufactured to high-quality standards. For warranty information and customer support, please refer to the retailer or manufacturer's official website where you purchased the product. Keep your proof of purchase for warranty claims.
For further assistance or technical inquiries, please contact Optonica customer service.
