Introducció
This manual provides comprehensive instructions for the safe and efficient use of your Paulmann MaxLED 79797 RGBW Controller. This device allows you to control Paulmann MaxLED RGBW light strips, enabling functions such as switching, dimming, and changing light colors and effects via the included wireless remote control. The controller operates without requiring direct line-of-sight to the remote, offering a range of up to 30 meters.
Instruccions importants de seguretat
- Llegiu atentament totes les instruccions abans de la instal·lació i el funcionament.
- Conserveu aquest manual com a referència futura.
- Aquest producte està dissenyat només per a ús en interiors (classificació IP20). No l'exposeu a la humitat ni a temperatures extremes.
- Assegureu-vos que el subministrament elèctric estigui desconnectat abans de qualsevol treball d'instal·lació o manteniment.
- Only use with Paulmann MaxLED RGBW strips and compatible 24V power supplies.
- Do not attempt to open or modify the controller or remote control. This will void the warranty.
- Mantingueu les piles fora de l'abast dels nens. Desfeu-vos de les piles usades de manera responsable.
Contingut del paquet
Verifiqueu que tots els components siguin presents al paquet:
- 1x Paulmann MaxLED RGBW Controller (Model 79797)
- 1 comandament a distància sense fil
- 1x Assembly Instructions (this manual)
Image: The MaxLED RGBW Controller and its wireless remote control. The controller is a small white rectangular unit with a cable, and the remote is an oval-shaped white device with various buttons and a color wheel.
Image: Diagram showing the MaxLED RGBW Controller and remote control with their approximate dimensions. The controller measures 22.5x85x45mm and the remote 20x110x53mm. A 150mm cable connects the controller to the LED strip.
Configuració i instal·lació
Follow these steps for proper installation of your MaxLED RGBW Controller:
- Prepareu l'àrea d'instal·lació: Ensure the surface where the LED strip will be mounted is clean, dry, and free of dust.
- Connecteu la tira LED: Connect your Paulmann MaxLED RGBW strip to the output cable of the controller. The system uses an easy plug-in connection. Ensure the connectors are securely fastened.
- Connecteu la font d'alimentació: Connect a compatible 24V Paulmann power supply (not included) to the input side of the MaxLED RGBW Controller.
- Muntar el controlador: The controller is designed for hidden installation. Place it in a discreet location where it is protected from physical damage and moisture, but still allows for proper signal transmission from the remote (up to 30m range).
- Encès: Once all connections are secure, plug the power supply into a suitable electrical outlet.
- Pairing the Remote Control (if necessary): The remote control is usually pre-paired. If not, refer to the "Operating Instructions" section for pairing procedures.
Image: This image illustrates the MaxLED expandable component system, highlighting three key aspects: "Easy to connect" (showing a hand connecting an LED strip), "Easy to mount" (showing an LED strip being applied to a surface), and "Easy to control" (showing the remote control). This demonstrates the simplicity of the setup process.
Instruccions de funcionament
The wireless remote control allows full command over your MaxLED RGBW strips.
Funcions de control remot:
Imatge: Una imatge detallada view of the MaxLED RGBW remote control, showing its various buttons and the central color wheel. The remote features power, brightness, mode, speed, and color selection controls.
- Botó d'encendre (O): Press to turn the LED strips On or Off.
- Control de brillantor (B +/-): Use the '+' button to increase brightness and '-' to decrease brightness.
- Roda de colors: Touch the color wheel to select a desired static color for your LED strips.
- Mode Selection (M): Cycle through various pre-programmed light effects and color changing modes.
- Control de velocitat (S +/-): When in a dynamic mode, use the '+' button to increase the speed of the effect and '-' to decrease it.
Vinculació del comandament a distància:
If your remote control is not responding, it may need to be paired with the controller:
- Assegureu-vos que el controlador estigui encès.
- Within 3 seconds of powering on the controller, press and hold the "Mode" (M) button on the remote control for a few seconds.
- The LED strips should flash to indicate successful pairing.
Manteniment
Neteja:
To clean the controller and remote control, gently wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the components.
Substitució de la bateria del control remot:
The remote control requires batteries (type not specified in product data, typically CR2032 or similar button cell). If the remote's range decreases or it stops responding, replace the battery:
- Localitzeu el compartiment de la bateria a la part posterior del comandament a distància.
- Open the compartment using a small screwdriver or by sliding the cover.
- Remove the old battery and insert a new one, ensuring correct polarity (+/-).
- Tanqueu el compartiment de la bateria de manera segura.
- Elimina la bateria antiga d'acord amb la normativa local.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| LED strips do not light up. | No power, loose connection, faulty power supply, remote not paired. | Check power supply connection. Ensure all cables are securely plugged in. Verify power outlet is functional. Re-pair the remote control (see Operating Instructions). |
| El comandament a distància no respon. | Bateria gastada, comandament a distància no emparellat, fora de l'abast. | Replace remote control battery. Re-pair the remote control. Move closer to the controller (within 30m). |
| Els colors són incorrectes o inconsistents. | Loose connection to LED strip, faulty LED strip. | Check the connection between the controller and the LED strip. Ensure the strip is fully compatible. |
| Dimming or effects not working. | Remote control issue, incompatible LED strip. | Ensure the remote control battery is good and it is paired. Verify the LED strip is an RGBW dimmable type. |
Especificacions
| Marca | Paulman |
| Número de model | 79797 |
| Dimensions del producte (L x A x A) | 5.3 x 11 x 2 cm (Controller); 20 x 110 x 53 mm (Remote) |
| Pes | 102 grams |
| Classificació IP | IP20 (només per a ús interior) |
| Material | Plàstic |
| Màx. Wattage | 144 watts |
| Voltage | 24 Volts |
| Tipus de font de llum | LED (for compatible strips) |
| Font d'alimentació | AC (via external 24V power supply) |
| Característiques especials | Dimmable, Variable Intensity, Remote Control, RGBW Color Change |
| Freqüència de control remot | RF de 2.4 GHz |
| Interval de control remot | Up to 30 meters (non-line-of-sight) |
| Requereix piles (comandament a distància) | Sí (no inclòs) |
Image: The MaxLED RGBW Controller and its remote control, emphasizing the 2.4 GHz RF wireless technology for reliable communication.
Garantia i Suport
Garantia:
Paulmann offers a 1-year availability for spare parts for this product. For specific warranty terms and conditions, please refer to the official Paulmann weblloc o poseu-vos en contacte amb el vostre distribuïdor.
Atenció al client:
For further assistance, technical support, or inquiries regarding your Paulmann MaxLED RGBW Controller, please visit the official Paulmann website or contact their customer service department. Contact information can typically be found on the product packaging or the Paulmann weblloc.
Paulman Weblloc: www.paulmann.com
