1. Producte acabatview
The deleyCON 12V SLIM LED Power Supply Unit (Model MK3212) is a compact and efficient solution for powering various 12V DC LED lighting applications. Its slim design allows for easy integration into tight spaces, providing stable and flicker-free illumination.
Característiques principals:
- Disseny prim: Particularly small and flat for discreet installation.
- Vol de sortida constanttage: Ensures uniform and flicker-free light.
- Àmplia compatibilitat: Suitable for LED lights, LED strips, G4, MR11, and MR16 lamps.
- Proteccions de seguretat: Built-in protection against overload, overheating, and short circuits.
- Connexió paral·lel: Supports parallel connection of multiple LED loads.
2. Especificacions
| Especificació | Valor |
|---|---|
| Número de model | MK3212 |
| Entrada Voltage | 200 - 240 Volts AC (Alternating Current) / 50/60 Hertz |
| Corrent d'entrada (màx.) | Menys de 230 mA |
| Vol. De sortidatage | 12 Volts DC (Direct Current) |
| Corrent de sortida (màx.) | 1.67 Amperes |
| Càrrega màxima | 20 watts |
| Classe de protecció | IP20 |
| Dimensions (L x A x A) | 103 x 35.5 x 16 mm (4.06 x 1.40 x 0.63 polzades) |
| Pes | Aprox. 52 g (1.83 oz) |
| Cable d'entrada | H03VVH2-F 2x 0.75 mm² |
| Cable de sortida | H03VVH2-F 2x 0.75 mm² |
3. Informació de seguretat
WARNING: Electrical shock hazard. Installation should only be performed by a qualified electrician or competent person. Always disconnect power before installation or servicing.
- Assegureu-vos que l'entrada voltage (200-240V AC) matches your mains supply.
- Do not exceed the maximum load of 20 watts. Overloading can damage the unit and connected LEDs.
- The unit is rated IP20, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Install in a dry environment.
- Assegureu-vos una ventilació adequada al voltant de la unitat per evitar el sobreescalfament.
- No obriu la c.asing of the power supply unit. There are no user-serviceable parts inside.
- Use appropriate wiring and connectors that comply with local electrical codes.
4. Configuració i instal·lació
Follow these steps for safe and correct installation of your deleyCON LED Power Supply Unit:
- Desconnecteu l'alimentació: Before starting any electrical work, ensure the main power supply to the circuit is turned off at the breaker or fuse box. Verify with a voltage provador.
- Preparació del cablejat: Strip approximately 5-7mm of insulation from the ends of your input (AC) and output (DC) wires.
- Connect Input (AC): Connect the mains AC wires to the input terminals labeled 'N' (Neutral) and 'L' (Live) on the power supply unit. Ensure a secure connection.
- Connect Output (DC): Connect your 12V DC LED lights or strips to the output terminals labeled '+' (Positive) and '-' (Negative). Observe correct polarity.
- Connexions segures: Assegureu-vos que totes les connexions dels cables estiguin ben ajustades i segures per evitar contactes solts i possibles perills.
- Muntatge: Place the power supply unit in a suitable, dry location, ensuring adequate ventilation. The slim design allows for installation in confined spaces.
- Restaura l'alimentació: Once all connections are made and secured, restore power to the circuit. The connected LEDs should illuminate.
5. Instruccions de funcionament
The deleyCON 12V SLIM LED Power Supply Unit operates automatically once correctly installed and powered. It provides a constant 12V DC output to your connected LED lights.
- Assegureu-vos el wat totaltage of all connected LED lights does not exceed 20 watts.
- The unit is designed for continuous operation within its specified parameters.
- If the LEDs flicker or do not light up, refer to the Troubleshooting section.
6. Manteniment
The deleyCON LED Power Supply Unit requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Neteja: Ensure the unit is disconnected from power before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Ventilació: Periodically check that the ventilation areas around the unit are not obstructed by dust or debris.
- Connexions: Occasionally inspect the wiring connections to ensure they remain secure. Only do this with power disconnected.
- Medi ambient: Ensure the operating environment remains dry and within acceptable temperature ranges.
7. Solució De Problemes
If you encounter issues with your deleyCON LED Power Supply Unit, refer to the following table:
| Problema | Causa possible | Solució |
|---|---|---|
| Els LED no s'encenen | No power supply to the unit | Check mains power, circuit breaker, and input wiring connections. |
| Incorrect wiring (e.g., reversed polarity) | Verify output wiring (+ to + and - to -) to LEDs. | |
| Faulty LED or LED strip | Test the LED with another known good 12V DC power source if possible. | |
| Els LED parpellegen o s'atenuen | Sobrecàrrega (potència total)tage exceeds 20W) | Reduce the number or wattage of connected LEDs. |
| Connexions soltes | Disconnect power and re-secure all wiring connections. | |
| Sobreescalfament de la unitat | Ensure adequate ventilation around the unit. Reduce load if necessary. | |
| La unitat se sent calenta | Normal operation (some heat is expected) | Ensure proper ventilation. If excessively hot, check for overload. |
| Sobrecàrrega o curtcircuit | Disconnect power immediately. Check for short circuits in wiring or LEDs. Reduce load. |
If the problem persists after attempting these solutions, contact deleyCON customer support.
8. Garantia i Suport
This deleyCON product is designed for reliability and performance. For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official deleyCON website. In case of technical issues or questions not covered in this manual, please contact deleyCON customer support.
Política de devolució: This product is subject to a 30-day return/replacement policy from the date of purchase, as per standard retail terms.