Introducció
Welcome to the Marshall Kilburn II Portable Bluetooth Speaker user manual. This guide provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. The Kilburn II is designed for powerful, multi-directional sound, offering 20+ hours of portable playtime on a single charge.
Característiques principals:
- Disseny portàtil: Weighs just 2.5 kg with a guitar-inspired carrying strap for easy transport.
- Temps de joc ampliat: Enjoy 20+ hours of portable playtime on a single charge. Quick charge feature provides 3 hours of playtime in just 20 minutes, with a full charge in 2.5 hours.
- So personalitzable: Analog control knobs on the top panel allow for fine-tuning of bass, treble, and volume.
- Bluetooth 5.0 aptX: Advanced wireless technology for high-quality music streaming from any Bluetooth device up to 30 feet away.
- Construcció duradora: Manufacturer refurbished product, showing limited or no wear, includes original accessories and a 90-day limited hardware warranty.
Què hi ha a la caixa
Upon unboxing your Marshall Kilburn II, please ensure all the following components are present:
- Cable de xarxa
- Guia d'inici ràpid
- Informació legal i de seguretat
Configuració
- Càrrec inicial: Before first use, fully charge your Kilburn II speaker using the provided mains lead. A full charge takes approximately 2.5 hours.
- Encès: Locate the power switch on the top panel and toggle it to the "ON" position.
- Emparellament Bluetooth:
- Press the "PAIR" button on the top panel. The Bluetooth indicator light will begin to flash, indicating it's in pairing mode.
- On your audio device (smartphone, tablet, laptop), navigate to the Bluetooth settings.
- Select "Kilburn II" from the list of available devices.
- Once connected, the Bluetooth indicator light on the speaker will turn solid.
- Connexió amb cable (opcional): For devices without Bluetooth, connect an audio cable (not included) to the "INPUT" jack on the top panel. The input indicator light will illuminate.
Image: Top panel of the Marshall Kilburn II speaker, highlighting the volume, bass, treble knobs, and the Bluetooth pairing and input selection buttons.
Instruccions de funcionament
- Ajust de volum: Use the large "VOLUME" knob on the top panel to increase or decrease the sound output.
- Adjusting Bass and Treble: Use the "BASS" and "TREBLE" knobs to fine-tune the audio frequencies to your preference.
- Canvi de fonts: Press the "SOURCE/WAKE" button to switch between Bluetooth and wired input modes.
- Indicador de bateria: The "BATTERY" indicator light provides an approximate status of the speaker's charge.
- Apagar: Toggle the power switch to the "OFF" position when not in use to conserve battery life.
Image: A hand demonstrating the adjustment of the volume knob on the Marshall Kilburn II speaker's top panel.
Imatge: Frontal view of the Marshall Kilburn II Portable Bluetooth Speaker, showcasing its classic design and grille.
Manteniment
- Neteja: Use a soft, dry cloth to clean the exterior of the speaker. Avoid using abrasive cleaners or solvents.
- Emmagatzematge: Guardeu l'altaveu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Cura de la bateria: For optimal battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in constant use.
- Resistència a l'aigua: Aquest altaveu és NO waterproof. Avoid exposure to water or high humidity.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense poder | La bateria està esgotada o no carregada. | Connect the speaker to a power source using the mains lead and allow it to charge. |
| No es pot emparellar per Bluetooth | Speaker is not in pairing mode, or device is out of range. | Ensure the speaker's Bluetooth indicator is flashing. Move your device closer to the speaker (within 30 feet). Forget the device on your phone and try pairing again. |
| Sense so | Volume is too low, incorrect input selected, or device is muted. | Increase the volume on both the speaker and your audio device. Press the "SOURCE/WAKE" button to ensure the correct input (Bluetooth or wired) is selected. Check if your device is muted. |
| Distorsió del so | Volume too high, or bass/treble settings are extreme. | Lower the volume. Adjust the bass and treble knobs to a more balanced setting. |
Especificacions
- Nom del model: Kilburn II
- Número de model: 1002634
- Tipus d'altaveu: Altaveu Bluetooth portàtil
- Tecnologia de connectivitat: Bluetooth 5.0 aptX
- Interval sense fil: Fins a 30 peus (9 metres)
- Font d'alimentació: Funciona amb bateria
- Temps de reproducció de la bateria: Més de 20 hores
- Temps de càrrega: 2.5 hours (full charge), 20 minutes for 3 hours playtime
- Potència de sortida màxima dels altaveus: 36 watts
- Mode de sortida d'àudio: estèreo
- Mètode de control: App, Analog Knobs (Volume, Bass, Treble)
- Dispositius compatibles: Telèfon intel·ligent, tauleta, ordinador portàtil
- Pes de l'article: 16 unces (aprox. 0.45 kg)
- Dimensions del paquet: 14.2 x 10.6 x 10.4 polzades
- Nivell de resistència a l'aigua: No resistent a l'aigua
- Estil: Rugged, Vintage
- Fabricant: Marshall
- GTIN: 887401057037
Garantia i Suport
This Certified Refurbished product includes a Garantia limitada de maquinari de 90 dies. For warranty claims or technical support, please refer to the contact information provided in the Legal and Safety Information document included with your product.
Pot ser que hi hagi plans de protecció addicionals disponibles per a la compra:
- Pla de protecció de 2 anys
- Pla de protecció de 3 anys
- Protecció completa (facturació mensual)
Vídeos de productes
Our most used speaker!
Vídeo: Un usuari review espectacleasing the Marshall Kilburn II speaker in a home setting, demonstrating its controls and portability. The speaker is highlighted as a frequently used item for daily music playback.
Beautiful sound quality speaker that has lasted us 6+ years
Vídeo: Un usuari review highlighting the sound quality and durability of the Marshall Kilburn II speaker. The video demonstrates the speaker's controls and mentions its use for various occasions, including a wedding.
