lightmaXX Vega Bar FX LED Light Bar User Manual

Instruccions de seguretat

• Seguretat elèctrica: Assegureu-vos que la font d'alimentació voltage matches the device's requirements. Always connect to a grounded outlet. Disconnect power before cleaning or servicing.
• Instal·lació: Mount the fixture securely using appropriate hardware. Ensure adequate ventilation around the unit to prevent overheating. Do not expose to rain or moisture.
• Funcionament: Avoid direct eye exposure to the light source. Do not operate if the power cord is damaged. Keep away from flammable materials.
• Manteniment: Demaneu totes les tasques de manteniment a personal qualificat. No intenteu reparar la unitat vosaltres mateixos.

Contingut del paquet

Verifiqueu que tots els articles siguin presents i en bon estat en desempaquetar-los:

• lightmaXX Vega Bar FX LED Light Bar
• Cable d'alimentació
• Suports de muntatge (preinstal·lats o inclosos)
• Manual d'usuari (aquest document)

Producte acabatview

The Vega Bar FX features a robust housing with integrated mounting brackets. The front panel houses the 12 CREE LEDs and 72 PIXEL elements, capable of producing a wide range of colors and dynamic effects. The rear panel includes power input, DMX input/output, and a control display with navigation buttons.

Figura 1: Frontal view of the lightmaXX Vega Bar FX LED Light Bar showcasing its multi-color capabilities.

Figura 2: lateral view illustrating the power input connection and the control panel interface.

Configuració

1. Muntatge

The Vega Bar FX comes with adjustable mounting brackets. These brackets can be used to position the light bar on a flat surface or to attach it to a truss system using appropriate clamps (not included). Ensure the mounting surface or truss is capable of supporting the fixture's weight (2.57 kg).

2. Connexió d'alimentació

1. Connect the provided power cable to the power input socket on the rear of the light bar.
2. Plug the other end of the power cable into a suitable grounded electrical outlet.
3. Ensure the power switch (if present) is in the OFF position before connecting to power.

3. Connexió DMX (opcional)

For external control via a DMX controller:

1. Connect a DMX cable from your DMX controller's output to the DMX IN port on the Vega Bar FX.
2. If linking multiple units, connect a DMX cable from the DMX OUT port of the first unit to the DMX IN port of the next unit in the chain.
3. Terminate the last unit in the DMX chain with a 120 Ohm DMX terminator (not included) to prevent signal reflection.

Instruccions de funcionament

1. Encendre/apagar

Once connected to power, turn on the main power switch located on the rear panel. The display will illuminate, indicating the unit is ready for operation.

2. Navegació del menú

Use the menu buttons (typically UP, DOWN, ENTER, MODE) on the rear panel to navigate through the various settings and modes displayed on the LCD screen.

3. DMX Control Modes

The Vega Bar FX supports multiple DMX channel modes, including 6, 9, 84, and 89 channels. Select the desired DMX mode from the unit's menu to match your DMX controller's configuration. Set the DMX start address for the fixture.

• Mode d'6 canals: Basic control over color mixing (RGBW), dimmer, and strobe.
• Mode d'9 canals: Enhanced control, potentially adding pre-programmed effects or master dimmer.
• Mode d'84 canals: Offers individual control over the 12 CREE LEDs (12 x RGBW = 48 channels) and potentially the 72 PIXEL elements for advanced pixel mapping.
• Mode d'89 canals: Provides the most granular control, likely including full pixel mapping capabilities for the 72 PIXEL elements, plus master functions.

4. Internal Programs and Strobe

The unit features built-in automated programs and sound-activated modes. These can be selected via the menu when not operating in DMX mode. The strobe function offers adjustable speeds from 1 to 18 flashes per second, accessible either through DMX or internal programs.

Figure 3: The light bar illuminating with a combination of blue and orange colors.

Figure 4: The light bar displaying a vibrant mix of red and orange hues.

Manteniment

Neteja

Una neteja regular ajuda a mantenir un rendiment òptim i allarga la vida útil del vostre aparell. Desconnecteu l'alimentació abans de netejar-lo.

• Feu servir un drap suau i sense borrissol per netejar l'exterior.
• Per a la brutícia persistent, una mica deamp es pot fer servir un drap amb sabó suau, seguit d'un drap sec.
• Do not use abrasive cleaners or solvents, as these can damage the finish and optical components.
• Periodically clean the cooling vents to ensure proper airflow.

Emmagatzematge

When not in use, store the light bar in a dry, dust-free environment, preferably in its original packaging or a protective case.

Resolució de problemes

Especificacions

Garantia i Suport

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your authorized lightmaXX dealer. Keep your proof of purchase for any warranty claims.