1. Introducció
This manual provides detailed instructions for the installation, setup, and operation of your MOES WiFi Smart Wall Touch Light Switch. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Figure 1: MOES WiFi Smart Wall Touch Light Switch (1 Gang, Black)
2. Informació de seguretat
- Instal·lació elèctrica: Installation should only be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.
- Desconnexió d'alimentació: Always disconnect power at the circuit breaker before installing, removing, or servicing the switch. Failure to do so may result in serious injury or death.
- Cable neutre necessari: This smart switch requires a neutral wire in your switch box to operate correctly. If you do not have a neutral wire, this switch is not compatible.
- Xarxa Wi-Fi: Requires a 2.4GHz Wi-Fi network connection. It is not compatible with 5GHz Wi-Fi networks.
- Compatibilitat: Only compatible with 1 gang switch boxes. Not compatible with standard US 2/3/4 gang switch plates. This switch is not designed for 3-way switch configurations or as a dimmer switch.
- Només per a ús interior: Aquest dispositiu està pensat per a ús interior en llocs secs.
- Vol. Operatiutage: Ensure your electrical system operates within the specified voltagrang de corrent (240 volts).
Figure 2: Key compatibility and wiring considerations.
3. Contingut del paquet
- MOES WiFi Smart Wall Touch Light Switch (1 Gang)
- Manual d'usuari
- Cargols de muntatge
4. Característiques del producte
- Control tàctil: Features a toughened glass surface for touch operation.
- Control de veu: Compatible with Amazon Alexa (Amazon Echo/Dot/Tap) and Google Assistant for hands-free operation.
- Comandament a distància Wi-Fi: Control the wall switch wirelessly from anywhere using the 'Smart Life' app on your smartphone via Wi-Fi or 4G network. No separate hub is required.
- Funció de cronometratge: Schedule lights and appliances to turn on/off automatically at specific times.
Figure 3: Smart Switch in a home environment.
5. Especificacions
| Especificació | Valor |
|---|---|
| Mode d'operació | Automàticament, apagat, interruptor intel·ligent |
| Valoració actual | 10 Amps |
| Vol. Operatiutage | 240 Volts |
| Tipus de contacte | Normalment obert |
| Tipus de connector | Sense fil |
| Terminal | Cargol |
| Dimensions de l'article (L x A x A) | 4.7 x 2.9 x 1.5 polzades |
| Tipus de circuit | 1 vies |
| Tipus d'actuador | Toca |
| Material de contacte | Llautó |
| Classificació de protecció internacional | IPX4 |
| Nombre de llocs | 3 |
| Tipus de controlador | Amazon Alexa, Google Assistant |
| Mètode de control | Remot |
| Protocol de connectivitat | Wi-Fi (només 2.4 GHz) |
| Wattage | 1000 watts |
| Pes de l'article | 7.4 unces |
Figure 4: Product dimensions and wiring terminals.
6. Guia d'instal·lació
Abans de començar:
- Assegureu-vos que l'alimentació estigui DESCONNECTADA a l'interruptor.
- Confirm your switch box has a neutral wire. This is essential for the smart switch to function.
- Verifiqueu que la vostra xarxa Wi-Fi sigui de 2.4 GHz.
- This switch is for 1-gang setups only and is not a dimmer or 3-way switch.
Passos de cablejat:
- Turn off power at the circuit breaker for the light switch you are replacing.
- Traieu la placa de paret existent i l'interruptor.
- Identify the wires: Live (usually black), Neutral (usually white), and Load (to the light fixture). A Ground wire (usually green or bare copper) may also be present.
- Connect the wires from your wall box to the corresponding terminals on the MOES Smart Switch:
- N: Connect the Neutral wire (usually white).
- L: Connect the Live wire (incoming power, usually black).
- L1: Connect the Load wire (to the light fixture). For 1-gang switches, only L1 is typically used.
- Terra: If present, connect the ground wire to the switch's ground terminal (if available) or safely cap it.
- Fixeu l'interruptor a la caixa de paret amb els cargols proporcionats.
- Attach the glass panel.
- Resta l'alimentació al disjuntor.
After installation, the indicator lights on the switch should blink quickly, indicating it is ready for Wi-Fi connection in Default Normal Mode.
Figure 5: Replacing a traditional switch with the smart touch switch.
7. Configuració i emparellament de l'aplicació
To control your smart switch via smartphone, download the 'Smart Life' app from the App Store (iOS) or Google Play (Android).
- Download and Register: Install the 'Smart Life' app and register an account.
- Afegeix un dispositiu: Open the app, tap '+' or 'Add Device', and select 'Light Switch' or 'Electrical Switch'.
- Confirma l'estat de l'indicador: Ensure the indicator light on your switch is blinking quickly. If not, you may need to reset the device.
- Connecta't a Wi-Fi: Follow the in-app instructions to connect the switch to your 2.4GHz Wi-Fi network. Enter your Wi-Fi password when prompted.
- Device Renaming: Once connected, you can rename the switch for easier identification (e.g., "Living Room Light").
Restablir el dispositiu:
If the indicator lights are not blinking quickly, or if you need to reset the switch for any reason:
- Press and hold any button on the switch for approximately 20 seconds until the indicator light blinks quickly. This puts the device into Default Normal Mode for Wi-Fi connection.
- If the indicator light blinks very slowly after holding for 20 seconds, it is in AP (Access Point) mode. This is an alternative pairing mode if Default Normal Mode fails.
Video 1: Demonstrates how to reset or unlock the device by pressing and holding a button for 20 seconds, showing the indicator light changes for different pairing modes.
Figure 6: Remote control via mobile application.
8. Funcionament
Once installed and paired with the 'Smart Life' app, you can operate your switch in several ways:
- Manual Touch: Simply touch the glass panel to turn the connected light or appliance on or off.
- Control de l'aplicació: Use the 'Smart Life' app on your smartphone to remotely turn the switch on or off from anywhere with an internet connection.
9. Integració del control per veu
The MOES Smart Switch is compatible with Amazon Alexa and Google Assistant for convenient voice control.
- Link 'Smart Life' Account: In your Amazon Alexa or Google Home app, search for the 'Smart Life' skill/action and enable it.
- Inicieu sessió: Log in with your 'Smart Life' account credentials.
- Descobriu els dispositius: Once linked, ask Alexa or Google Assistant to "Discover devices" or manually initiate device discovery in their respective apps.
- Comandaments de veu: You can now use voice commands such as "Alexa, turn on [device name]" or "Hey Google, turn off [device name]". Use the names you assigned in the 'Smart Life' app.
Figure 7: Voice control with Alexa and Google Home.
10. Funció de sincronització
The 'Smart Life' app allows you to set schedules and timers for your smart switch, automating your lighting or appliances.
- Crear horaris: In the 'Smart Life' app, navigate to the device settings and select 'Schedule' or 'Timer'.
- Set On/Off Times: Configure specific times for the switch to turn on or off. You can set daily, weekly, or custom schedules.
- Automatització de la sortida/posta de sol: Some app versions allow for automation based on local sunrise and sunset times.
Figure 8: Setting schedules via the Smart Life app.
11. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| L'interruptor no respon al tacte. | No power, incorrect wiring, or device locked. | Check circuit breaker. Verify wiring (Live, Neutral, Load). Perform a device reset (hold button for 20 seconds). |
| No es pot connectar a la Wi-Fi. | Incorrect Wi-Fi band (5GHz), weak signal, incorrect password, or device not in pairing mode. | Ensure your router is broadcasting a 2.4GHz signal. Move closer to the router. Double-check Wi-Fi password. Reset the switch to enter pairing mode (blinking indicator). Try AP mode if normal mode fails. |
| El control per veu no funciona. | 'Smart Life' skill not enabled, incorrect device name, or no internet connection. | Ensure the 'Smart Life' skill is enabled and linked in your Alexa/Google Home app. Verify device names match. Check internet connectivity. |
| Switch goes offline frequently. | Weak Wi-Fi signal, network congestion, or router issues. | Improve Wi-Fi signal strength (e.g., Wi-Fi extender). Reduce network congestion. Restart your router. |
12. Manteniment
- Neteja: Gently wipe the glass panel with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Actualitzacions de firmware: Periodically check the 'Smart Life' app for available firmware updates to ensure optimal performance and security.
13. Garantia i Suport
For warranty information or technical support, please refer to the documentation provided with your purchase or contact MOES customer service directly. Contact details can typically be found on the MOES official website or within the 'Smart Life' app's support section.
Vídeo 2: Acabatview of MOES smart home products and their integration, demonstrating various smart life features like color temperature control, music sync lighting, and smart automation based on environmental sensors.
