Raffel Systems 4-Button Power Touch Sensor User Manual

Introducció

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Raffel Systems 4-Button Power Touch Sensor. This product is designed as a replacement part for compatible powered recliners, controlling both recline and headrest functions. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Informació de seguretat

Handle the touch sensor and associated wiring with care during assembly and installation.
Avoid exposure to liquids and extreme temperatures, as this can damage the electronic components.
Always follow all assembly and installation instructions carefully to prevent injury or damage to the product or furniture.
Ensure all power is disconnected from the recliner before attempting any installation or repair.

Producte acabatview

The Raffel Systems 4-Button Power Touch Sensor is an internal control component for powered recliners. It facilitates the control of both the recline and headrest motors. This sensor is designed to be sensitive to soft touch inputs.

Característiques principals:

Controls both headrest and recliner motors.
Premium touch sensors for responsive operation.
Compatible with ManWah and other touch-style recliners.

Nota important: This product includes the touch sensor internals only. It no ho fa include the 4 physical buttons or the mounting plate, which are sold separately.

Raffel Systems 4-Button Power Touch Sensor with all components

Figura 1: Mésview of the Raffel Systems 4-Button Power Touch Sensor, showing the main control board, sensor leads, and connectors.

Close-up of the touch sensor leads with labels

Figura 2: Detallada view of the individual touch sensor leads. Each lead is labeled for correct connection to the corresponding button (e.g., "OPEN", "CLOSE").

Close-up of the 5-pin motor connector and 2-prong headrest connector

Figure 3: Close-up of the main 5-pin connector for the recliner motor and the 2-prong connector for the headrest motor. Labels indicate their respective functions.

Guia d'instal·lació

This touch sensor is designed as a replacement part. Ensure your recliner is compatible with a 4-button touch sensor system before proceeding.

Desconnecteu l'alimentació: Unplug the recliner from the wall outlet to ensure no power is supplied to the system.
Access Existing Control Board: Locate the existing touch sensor control board within your recliner. This may require accessing the underside or interior of the furniture.
Desconnecta el sensor antic: Carefully unplug the wire harness from the existing control board. Note the connections, especially the main 5-pin connector for the recliner motor and the 2-prong connector for the headrest motor. Also, disconnect the individual sensor leads from the buttons.
Instal·leu un sensor nou:
- Connect the new touch sensor control board.
- Connect the main 5-pin connector from your recliner's motor to the corresponding port on the new sensor board.
- Connect the 2-prong power cable from your chair's headrest to the appropriate port.
- Connect the individual sensor leads (labeled "OPEN", "CLOSE", etc.) to your existing 4 buttons. Ensure each lead is connected to its correct button function.
- Ensure all wires and connectors are securely fastened and labeled appropriately.
Components segurs: Position the new sensor board and wiring securely within the recliner, ensuring no wires are pinched or exposed to moving parts.
Funcionalitat de prova: Once all connections are made and secured, plug the recliner back into the wall outlet and test all 4 button functions (recline open/close, headrest open/close) to ensure proper operation.

Funcionament

The Raffel Systems 4-Button Power Touch Sensor operates in conjunction with your recliner's existing 4 physical buttons (sold separately). These buttons, when connected to the sensor, allow for intuitive control of your recliner's functions.

Recline Control: Use the designated recline buttons to extend or retract the footrest and recline the backrest.
Headrest Control: Use the designated headrest buttons to adjust the position of the headrest.
The touch sensors are designed to be highly sensitive, requiring only a soft touch for activation.

Manteniment

To ensure the longevity and proper functioning of your touch sensor, follow these maintenance guidelines:

Neteja: Keep the area around the sensor and buttons clean and free of dust or debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners directly on the sensor or wiring.
Condicions ambientals: Avoid exposing the sensor to excessive moisture, humidity, or extreme temperatures.
Integritat del cable: Periodically inspect all connected cables for any signs of wear, fraying, or damage. Ensure they are not pinched or under undue stress.

Resolució de problemes

If you encounter issues with your Raffel Systems 4-Button Power Touch Sensor, refer to the following common problems and solutions:

Problema	Causa possible	Solució
Recliner or headrest does not respond to button presses.	Tensió desconnectada. Connexió de cablejat fluixa o incorrecta. Damaged sensor lead or button. Faulty motor or power supply (less common for new sensor).	Ensure recliner is plugged in and power outlet is functional. Check all connections, especially the 5-pin motor connector and 2-prong headrest connector, and individual sensor leads. Ensure they are fully seated and correctly matched to labels. Inspect sensor leads for breaks or damage. If a specific button doesn't work, the corresponding lead might be compromised and may need re-splicing or replacement. If the issue persists after checking connections, consult a qualified technician.
Recliner does not fully open or close.	Partial connection or wire issue. Motor obstruction or mechanical issue.	Verify all sensor leads and main power connections are secure. Check for any physical obstructions preventing full movement of the recliner mechanism.
Sensor or wires become excessively hot.	Short circuit or incorrect wiring. Overload on the system.	Immediately disconnect power from the recliner. Re-check all wiring connections for correctness and ensure no bare wires are touching. If the issue persists, the sensor may be faulty, or there's an issue with the recliner's motor or power supply. Seek professional assistance.
Incorrect connector type for slave motor.	Compatibility issue with specific recliner model.	While this sensor typically uses standard connectors, some recliner models may vary. If the slave motor connection is incorrect (e.g., 2-prong instead of 5-pin), professional modification (e.g., re-splicing) may be required. This should only be attempted by a qualified individual.

Especificacions

Marca	Sistemes Raffel
Nom del model	TOUCH006
UPC	753577025111
Color	Negre
Característica especial	Touch-Sensitive Controls, Ergonomic
Ús recomanat	Replacing broken or missing touch sensor controls in powered recliners
Recompte d'unitats	1.0 recompte
Pes de l'article	7.4 unces
Dimensions del producte	95 x 3 x 3 inches (approximate, refers to cable length)
Fabricant	Sistemes Raffel
Recompte de posicions reclinables	2 (for recline and headrest)

Informació de la garantia

Specific warranty details for the Raffel Systems 4-Button Power Touch Sensor are not provided in this manual. For information regarding warranty coverage, terms, and conditions, please refer to the product packaging or contact Raffel Systems directly through their official weblloc o canals d'atenció al client.

Atenció al client

If you require further assistance, have questions not covered in this manual, or need to report an issue, please contact the manufacturer, Raffel Systems. Contact information can typically be found on the product packaging or their official company weblloc.

Please have your product model number (TOUCH006) and purchase details ready when contacting support.

	Touch Sensor Lighted Cupholder with Power Recline and Power Head Rest: Operating and Troubleshooting Guide Comprehensive guide for operating and troubleshooting the Raffel Systems Touch Sensor Lighted Cupholder, featuring power recline and power head rest functions. Includes setup instructions, user operation tips, connection checks, component identification, in-line junction replacement steps, and a detailed troubleshooting table.
	Raffel Systems ACC GWC 01 Wireless Charger User Manual and Specifications User manual and technical specifications for the Raffel Systems ACC GWC 01 wireless charger. Includes safety precautions, charging instructions, product details, and FCC compliance information.
	Raffel Systems BP512 Battery Pack for Motion Furniture User Manual and Safety Guide Comprehensive guide for the Raffel Systems BP512 Battery Pack, including important safety instructions, one-year limited warranty details, sleep mode operation, charging procedures, installation, and troubleshooting for motion furniture.
	Raffel Systems BP512 Battery Pack for Motion Furniture User Manual Comprehensive user manual for the Raffel Systems BP512 battery pack, covering safety instructions, warranty details, installation, charging, and troubleshooting for motion furniture like recliners and lift chairs.
	Raffel Systems BP536 Battery Pack for Motion Furniture User Guide Comprehensive user guide for the Raffel Systems BP536 Battery Pack, detailing safety instructions, warranty information, installation, operation, and troubleshooting for motion furniture.
	Raffel Systems BP536 Battery Pack for Motion Furniture - User Manual & Installation Guide Comprehensive guide for the Raffel Systems BP536 battery pack, including safety instructions, installation steps, charging procedures, LED indicators, sleep mode, and troubleshooting for motion furniture and adjustable beds.

Raffel Systems TOUCH006

Manual d'usuari

Raffel Systems 4-Button Power Touch Sensor for Power Recline and Headrest