Suport de paret per a TV de moviment complet PERLESMITH

1. Introducció

Thank you for choosing the PERLESMITH Full Motion TV Wall Mount. This manual provides detailed instructions for safe installation, operation, and maintenance of your new TV mount. Please read this manual thoroughly before installation to ensure correct setup and to maximize the lifespan of your product.

2. Informació de seguretat

WARNING: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty. If you have any questions, please contact PERLESMITH customer service.

• Do not install this product on drywall alone. It must be mounted on a solid wall structure such as concrete, brick, or wood studs.
• Assegureu-vos que l'estructura de la paret pugui suportar amb seguretat el pes combinat del suport i del televisor.
• Use only the hardware provided or specified by PERLESMITH.
• No supereu la capacitat màxima de pes de 45 kg (99 lliures).
• Aquest suport està dissenyat per a televisors d'entre 26 i 65 polzades.
• Verify your TV's VESA pattern is compatible (100x100mm to 400x400mm).
• Mantingueu els nens i les mascotes allunyats durant la instal·lació.

Figura 2.1: Tipus de paret compatibles
This image illustrates the types of walls suitable for mounting: concrete, brick, and wood studs. It explicitly warns against mounting on drywall alone, emphasizing the need for a solid structural anchor.

3. Especificacions

Figure 3.1: Suitable VESA Patterns
This diagram illustrates the range of VESA mounting patterns that the PERLESMITH TV mount supports, from a minimum of 100x100mm to a maximum of 400x400mm. Always check your TV's VESA pattern before purchase.

4. Configuració i instal·lació

The PERLESMITH TV wall mount is designed for quick and easy installation. Follow these three simple steps:

1. Step 1: Attach the TV Plate and Extension Brackets to Your TV
   Carefully place your TV face down on a soft, clean surface. Attach the TV plate and any necessary extension brackets to the back of your television using the appropriate screws and spacers from the provided hardware kit. Ensure all connections are secure.
2. Pas 2: instal·leu la placa de paret
   Determine the desired mounting height on your wall. Use the provided drilling template and bubble level to mark the drilling locations. Drill the pilot holes into your concrete, brick, or wood stud wall. Securely attach the wall plate to the wall using the appropriate anchors and screws. Ensure the wall plate is level and firmly fixed.
3. Pas 3: penja el televisor al suport de paret
   With assistance, carefully lift your TV and hook the TV plate onto the wall plate. Ensure the TV is securely seated on the mount. Tighten any safety screws or locking mechanisms to prevent accidental dislodgement.

Figure 4.1: Easy 3-Step Installation
This image visually guides you through the simple installation process: 1. Fix the TV plate to the back of the TV. 2. Install the wall plate securely. 3. Hook the TV onto the wall plate.

A bubble level and all necessary mounting hardware are included to assist with installation.

5. Funcionament de la muntura

Once installed, your PERLESMITH Full Motion TV Wall Mount offers flexible viewopcions d'ing:

• Inclinació: Adjust the screen vertically from +10° (upwards) to -15° (downwards) to reduce glare and find the perfect viewangle de ing.
• Giració: Pivot the TV horizontally up to +/- 45° to direct the screen towards your viewing area, whether from the sofa or dining table. The maximum swivel angle may vary depending on your TV's size.
• Extensió i retracció: Pull the TV out from the wall up to 403 mm (15.8 inches) or push it back to a minimum distance of 87 mm (3.4 inches) to save space.
• Ajust de nivell: Fine-tune the TV's horizontal level by +/- 3° after installation to ensure a perfectly straight display.

Figure 5.1: Optimal Viewing Angle Adjustments
This diagram shows the range of motion for the mount, including the +/- 45° swivel and the articulation of the arms, allowing for a wide range of viewangles d'ajust.

Figure 5.2: Extend and Retract Functionality
This image demonstrates the mount's ability to extend the TV up to 403mm from the wall and retract it to a mere 87mm, offering significant space-saving benefits.

6. Manteniment

To ensure the longevity and safe operation of your TV wall mount, perform the following maintenance checks periodically:

• Comproveu les connexions: Regularly inspect all screws and bolts to ensure they remain tight and secure. Retighten if necessary.
• Superfície neta: Wipe the mount with a soft, dry cloth to remove dust and dirt. Avoid using abrasive cleaners or solvents.
• Lubricació: If the articulating arms become stiff over time, a small amount of silicone-based lubricant can be applied to the pivot points.

7. Solució De Problemes

If you encounter any issues with your PERLESMITH TV wall mount, refer to the following common problems and solutions:

• El televisor no està anivellat després de la instal·lació: Use the +/- 3° level adjustment feature to fine-tune the horizontal alignment. If the issue persists, re-check the wall plate installation for levelness.
• La muntura sembla fluixa o inestable: Immediately remove the TV from the mount. Re-check all wall plate and TV bracket connections. Ensure all screws are tightened to the recommended torque. Verify the wall structure is sound and the correct anchors were used.
• Difficulty moving the TV (tilting/swiveling): Check for any obstructions. Ensure no cables are snagged. If the movement is stiff, apply a small amount of silicone lubricant to the joints. Do not force movement.
• Peces que falten: If any parts are missing from your package, do not proceed with installation. Contact PERLESMITH customer support for assistance.

8. Garantia i Suport

PERLESMITH is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase. For any questions, technical support, or assistance with parts, please contact PERLESMITH customer service through the retailer where you purchased the product or visit the official PERLESMITH weblloc.

Note: Information regarding spare parts availability is not available.