Producte acabatview
The InForce helmet-mounted light is a powerful lighting solution designed for versatility and reliability. It delivers 400 lumens of vibrant white light and is specifically crafted to easily attach to a variety of standard helmets equipped with rail-capable systems.
This light undergoes rigorous testing to ensure top-tier performance, durability, and reliability in real-world scenarios. Its compact and durable design prioritizes simplicity and ease of use, allowing for easy mounting without additional tools.
The InForce HML offers three distinct operating modes—constant, momentary, and strobe—providing a versatile and adaptable lighting solution for various scenarios. These modes deliver a concentrated, high-intensity beam for close to mid-range target identification. A convenient lockout feature, activated with a 1/4 turn of the head, prevents accidental activation during travel, transport, and storage.
Figure 1: Inforce HML mounted on a helmet.
Configuració i instal·lació
The Inforce HML is designed for quick and easy attachment to helmets equipped with rail systems. No special tools are required for installation.
Instal·lació de la bateria
- Ensure the light is in the "off" position.
- Unscrew the head of the light by turning it counter-clockwise.
- Insert the required battery type (refer to specifications for details) with the positive (+) end facing towards the head of the light.
- Screw the head back on clockwise until secure. Do not overtighten.
Mounting to Helmet
The light features an integrated mounting system compatible with standard helmet rails.
- Align the light's mounting interface with the helmet's rail system.
- Slide the light onto the rail until it clicks securely into place.
- Verify that the light is firmly attached and does not wobble.
Figure 2: Detail of the Inforce HML's mounting interface.
Instruccions de funcionament
The Inforce HML offers three primary operating modes for various tactical and utility needs.
Selecció del mode
- Encès constant: Press the activation button fully until it clicks. The light will remain on until the button is pressed again.
- Momentània activada: Press and hold the activation button. The light will remain on as long as the button is held down and will turn off upon release.
- Estroboscopi: Rapidly double-tap the activation button. The light will flash continuously until the button is pressed again.
Funció de bloqueig
To prevent accidental activation during transport or storage, utilize the lockout feature:
- From the "off" position, turn the head of the light approximately 1/4 turn counter-clockwise. This will engage the lockout mode.
- To disengage lockout mode, turn the head of the light 1/4 turn clockwise until it is fully tightened.
Figure 3: Inforce HML in operation, demonstrating its powerful beam.
Manteniment
Proper maintenance ensures the longevity and optimal performance of your Inforce HML.
Neteja
- Netegeu l'exterior de la llum amb un drap suau iamp drap per eliminar la brutícia i els residus.
- For stubborn grime, a mild soap solution can be used, followed by wiping with a clean, damp tela.
- No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar l'acabat o els components interns.
- Ensure the light is completely dry before storage or next use.
Canvi de bateria
Replace batteries when the light output diminishes or the light fails to activate. Refer to the "Battery Installation" section for detailed steps.
Emmagatzematge
When storing the light for extended periods, it is recommended to remove the battery to prevent potential leakage and damage to the device. Engage the lockout feature for added safety.
Resolució de problemes
If you encounter issues with your Inforce HML, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | Bateria morta o instal·lada incorrectament. Lockout feature engaged. | Canvieu la pila o assegureu-vos de tenir la polaritat correcta. Disengage lockout by tightening the head. |
| La llum és tènue o parpelleja. | Bateria baixa. Capell solt al cap o a la cua. | Substituïu la bateria. Assegureu-vos que el cap i la tapa de la cua estiguin completament ajustats. |
| Light detaches from helmet. | Muntatge incorrecte. | Re-mount the light, ensuring it clicks securely into place on the rail. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | Inforce |
| Nom del model | INFHML-F-WIR |
| Número de part | HML-06-1 |
| Color | Dark Earth |
| Brillantor | 400 lumens |
| Nombre de configuracions | 3 (Constant, Momentary, Strobe) |
| Font d'alimentació | Funciona amb bateria |
| Material | Fibra de vidre |
| Nivell de resistència a l'aigua | Impermeable (IP65) |
| Pes de l'article | 3 unces |
| Tipus de muntatge | Seat Mount or Handlebar Mount (Note: Product description indicates helmet rail mount) |
| Dimensions de l'article (LxWxH) | 4.2 x 1 x 1 polzades |
| UPC | 671192601339 |
Figure 4: Key performance indicators for the Inforce HML.
Garantia i Suport
Informació de la garantia
Emissive Energy Corp. (EEC), the manufacturer of Inforce products, warrants its products and accessories to be free of defect in workmanship and materials for the lifetime of the original owner. EEC will repair or replace the product, at its discretion, if it is determined to be defective.
In countries or jurisdictions with specific restrictions on lifetime warranties, EEC provides a 10-year limited warranty.
Atenció al client
For technical assistance, warranty claims, or general inquiries, please visit the official Inforce website or contact their customer service department. Refer to the product packaging or the Inforce weblloc web per obtenir la informació de contacte més actualitzada.
També podeu visitar el Inforce Store on Amazon per obtenir més informació sobre el producte i recursos d'assistència.
