1. Introducció
This manual provides detailed instructions for the safe and efficient operation of your Pyramid Universal Compact Bench Power Supply, model PS12KX.5. This linear regulated power supply is designed to convert 115V AC input to a constant 13.8V DC output, providing up to 10 amps continuous and 12 amps surge current. It is suitable for various applications including powering cellular phones, CB radios, scanners, and HAM radios.
Imatge 1.1: Frontal view of the Pyramid PS12KX.5 Bench Power Supply.
Per a una visualització completaview of the product, please watch the following video:
Vídeo 1.1: Producte oficial acabatview of the Pyramid Universal Compact Bench Power Supply.
2. Instruccions de seguretat importants
- Llegeix totes les instruccions: Before operating the power supply, read and understand all safety and operating instructions.
- Ús només en interiors: This unit is designed for indoor use in dry locations. Do not expose it to rain or moisture.
- Ventilació adequada: Ensure adequate ventilation around the unit. Do not block ventilation openings. The built-in cooling fan requires clear airflow.
- Font d'alimentació: Connect the power supply only to a 115V AC, 60Hz outlet.
- Posada a terra: Ensure the power cord is properly grounded.
- Eviteu la sobrecàrrega: Do not exceed the rated output current of 10 amps continu o 12 amps surge. Overloading can cause damage to the unit and connected devices.
- Protecció contra curtcircuits: The unit features electronic overload and short circuit protection. In case of a short circuit, the unit will automatically protect itself. Remove the short and cycle the power to reset.
- Temperatura: Do not operate the unit in excessively hot environments. The internal cooling fan helps manage temperature.
- Manteniment: No intenteu fer el manteniment d'aquesta unitat vosaltres mateixos. Envieu totes les tasques de manteniment a personal de servei qualificat.
3. Producte acabatview
3.1 Tauler frontal
Imatge 3.1: Detallada view del panell frontal.
- NORMAL LED (Green): Illuminates when the power supply is operating normally.
- PROTECTION LED (Red): Illuminates when the unit enters protection mode due to overload, short circuit, or over-temperature.
- OUTPUT Terminals: Red (+) for positive, Black (-) for negative DC output. These are screw-type terminals for secure connections.
- Interruptor d'alimentació: Encén/apaga la unitat.
3.2 Panell posterior
Imatge 3.2: Detallada view del panell posterior.
- Entrada de CA: Standard 3-prong AC power cord connection.
- Ventilador de refrigeració: S'activa automàticament per dissipar la calor durant el funcionament.
- Fusible: Provides additional protection. Refer to specifications for fuse rating.
4. Configuració
- Col·locació: Place the power supply on a stable, flat surface. Ensure there is sufficient space around the unit for proper ventilation, especially around the side and rear cooling vents.
- Connexió d'alimentació CA: Ensure the power supply's ON/OFF switch is in the OFF position. Connect the supplied AC power cord to the AC input on the rear panel of the power supply, then plug the other end into a standard 115V AC, 60Hz wall outlet.
- DC Load Connection: Identify the positive (+) and negative (-) terminals on your DC device. Using appropriate gauge wire, connect the positive wire from your device to the RED (+) output terminal on the power supply. Connect the negative wire from your device to the BLACK (-) output terminal. Ensure all connections are tight and secure to prevent arcing or poor contact.
Imatge 4.1: Lateral view illustrating cooling vents.
5. Instruccions de funcionament
- Encès: After ensuring all connections are secure, flip the POWER switch on the front panel to the ON position. The green NORMAL LED should illuminate, indicating normal operation.
- Seguiment: Observe the NORMAL LED. If the red PROTECTION LED illuminates, the unit has entered protection mode. Refer to the Troubleshooting section for guidance.
- Apagar: To turn off the power supply, flip the POWER switch to the OFF position. Disconnect the DC load if the device will not be used for an extended period.
6. Manteniment
- Neteja: Keep the power supply clean and free of dust. Use a soft, dry cloth for cleaning. Do not use liquid cleaners or aerosols.
- Ventilació: Regularly check that the cooling fan and ventilation openings are not obstructed by dust or debris. Blocked vents can lead to overheating.
- Substitució de fusibles: If the unit fails to power on and the fuse is suspected, disconnect the AC power cord and replace the fuse on the rear panel with one of the identical type and rating (refer to Specifications).
This section outlines common issues and their potential solutions. If you encounter a problem not listed here, or if the suggested solutions do not resolve the issue, contact customer support.
| Problema | Causa possible | Solució |
|---|---|---|
| No power, no LEDs illuminated. | Unit not plugged in; AC outlet faulty; Power switch OFF; Blown fuse. | Check AC power cord connection; Test AC outlet; Ensure Power switch is ON; Check and replace fuse if necessary (refer to Maintenance). |
| Red PROTECTION LED is illuminated. | Overload; Short circuit at output; Over-temperature. | Reduce load current; Check for short circuits at output terminals; Ensure adequate ventilation and allow unit to cool. Cycle power to reset. |
| No DC output, but NORMAL LED is on. | Loose DC output connections; Faulty DC device. | Check and tighten DC output terminal connections; Test DC device with another power source if possible. |
| Unit feels excessively hot. | Ventilació bloquejada; Càrrega excessiva. | Ensure cooling fan and vents are clear; Reduce load current. |
8. Especificacions
| Característica | Especificació |
|---|---|
| Model | PS12KX.5 |
| Entrada Voltage | 115V CA, 60Hz |
| Vol. De sortidatage | 13.8V DC (Fixed) |
| Corrent de sortida (continu) | 10 Amps |
| Output Current (Surge) | 12 Amps |
| Potència de sortidatage | 250 watts |
| Disseny de fonts d'alimentació | Linear / Regulated |
| Terminals | Tipus de cargol |
| Mètode de refrigeració | Air (Built-in Fan) |
| Protecció | Electronic Overload, Short Circuit, Over-Temperature, Fuse Protected |
| Dimensions (L x A x A) | 7.9 x 7.2 x 4.7 polzades |
| Pes | 8.73 lliures |
| Color | Negre |
9. Garantia i Suport
Pyramid products are designed for reliability and performance. This product is covered by a limited manufacturer's warranty against defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For technical support, warranty inquiries, or service, please contact Pyramid customer service. Contact information can typically be found on the manufacturer's weblloc o inclòs a l'embalatge del producte.
Fabricant: Piràmide
Weblloc: Visit the Pyramid Store on Amazon
