EPEVER 60A MPPT Solar Charge Controller User Manual

1. Introducció

This manual provides instructions for the installation, operation, and maintenance of the EPEVER 60A MPPT Solar Charge Controller (Model 6415AN). This controller is designed for 12V/24V/36V/48V auto-sensing systems, features common negative grounding, and supports a maximum PV input of 150V and 4500W. It is compatible with various battery types, including lead-acid (sealed, gel, flooded) and lithium batteries.

Figure 1: EPEVER 60A MPPT Solar Charge Controller (Model 6415AN) showing front and back views with terminals.

2. Instruccions de seguretat

• Ensure all wiring is correctly polarized and securely connected to prevent damage to the controller or batteries.
• Always connect the battery first, then the solar panel, and finally the load. Disconnect in reverse order.
• Instal·leu el controlador en una zona ben ventilada, allunyada de materials inflamables i de la llum solar directa.
• Use appropriate circuit breakers or fuses for all connections to protect against overcurrent.
• The controller is common negative ground. Ensure proper grounding for safety.

3. Producte acabatview

The EPEVER Tracer AN series controller utilizes multiphase synchronous rectification technology (MSRT) and an advanced MPPT control algorithm. It features a dual-core processor architecture and common negative design, offering high response speed, reliability, and industrial standard performance.

Figura 2: Detallada view of the EPEVER 60A MPPT Solar Charge Controller with key components labeled, including terminals, buttons, and indicators.

1. Fusible: Overcurrent protection for the battery circuit.
2. Terminals de bateria: Es connecta al banc de bateries.
3. PV Terminals: Connects to the solar panel array.
4. Load Control Relay: Output for controlling external loads.
5. RBVS Port: Volum de bateria remotatage Sensor port.
6. Utility/Generator Relay ON: Relay for utility or generator control.
7. Utility/Generator Relay OFF: Relay for utility or generator control.
8. RS485 Port (5V/DC/200mA): Communication port for PC or remote meter.
9. RTS Port: Remote Temperature Sensor port.
10. Generator and Load Relay Enable: Terminal for enabling generator and load relays.
11. PV Reverse Polarity Alarm Indicator: LED indicator for incorrect PV polarity.
12. Terminal de terra: For system grounding.
13. Botó SELECCIÓ: Used for navigating menus and changing settings.
14. Indicador LED de càrrega: Indica l'estat de càrrega.
15. Fault LED Indicator: Indica errors del sistema.
16. Botó ENTER: Used for confirming selections and entering menus.

4. Configuració i instal·lació

4.1 Esquema de cablejat

Figura 3: Example connection diagram illustrating the wiring of the solar charge controller with PV array, battery bank, and load. Consult local and national electrical codes for compliance.

4.2 Passos d'instal·lació

1. Muntatge: Mount the controller vertically on a non-flammable surface in a well-ventilated area, ensuring adequate clearance for heat dissipation.
2. Posada a terra: Connect the grounding terminal to earth ground. The controller features common negative grounding.
3. Connexió de la bateria: Connect the battery cables to the battery terminals on the controller. Ensure correct polarity (positive to positive, negative to negative). The PV input voltage must be at least 2V greater than the battery voltage to initiate charging.
4. Connexió del panell fotovoltaic: Connect the solar panel cables to the PV terminals. Verify correct polarity. The maximum PV open circuit voltage no ha de superar els 150 V.
5. Connexió de càrrega: Connect the load to the load control relay terminals.
6. Accessoris opcionals: Connect the Remote Temperature Sensor (RTS) to the RTS Port and the Remote Battery Voltage Sensor (RBVS) to the RBVS Port for accurate temperature compensation and voltage mesura.
7. Encès: After all connections are secure and verified, the controller will power on automatically.

5. Instruccions de funcionament

5.1 LCD Display and Interface

Figure 4: The LCD display shows various system parameters such as PV voltage, corrent de càrrega, volum de bateriatage, load status, and energy statistics. The browse interface illustrates different screens accessible via the SELECT and ENTER buttons.

The LCD provides real-time system information. Use the SELECCIONA button to navigate through different display screens and the ENTRAR button to confirm selections or enter settings menus.

5.2 Configuració del tipus de bateria

The controller supports various battery types. It is crucial to set the correct battery type for optimal charging and battery longevity. The supported types include:

• Segellat (per defecte)
• Gel
• Inundat
• Liti
• User-defined (for custom parameters)

Access the battery type settings through the controller's menu using the SELECT and ENTER buttons or via the RS485 communication port with appropriate software/remote meter.

5.3 Interfície de comunicació

The controller features an RS-485 communication bus interface and supports the Modbus communication protocol. This allows for connection to a PC or a remote meter (e.g., MT50) for advanced monitoring, parameter setting, and data logging.

6. Manteniment

Un manteniment regular garanteix la longevitat i el rendiment òptim del vostre controlador de càrrega solar.

• Inspecció visual: Periodically check all wiring connections for tightness and corrosion. Ensure no insulation damage.
• Neteja: Keep the controller's heat sink and enclosure clean and free from dust or debris to ensure proper heat dissipation. Use a dry cloth for cleaning.
• Ventilació: Ensure the installation area remains well-ventilated and free from obstructions that could impede airflow.
• Salut de la bateria: Monitor de vol de la bateriatage and health regularly. Ensure battery terminals are clean and free of corrosion.

7. Solució De Problemes

The controller includes a fault LED indicator to signal issues. Refer to the following common troubleshooting steps:

• Sense pantalla/Sense alimentació:
  • Comproveu les connexions de la bateria i assegureu-vos que estiguin ben fixades i polaritzades.
  • Comproveu el volum de la bateriatage es troba dins del rang de funcionament.
  • Check the battery fuse.
• No Charging from PV:
  • Check PV array connections and polarity. The PV reverse polarity alarm indicator will light up if polarity is incorrect.
  • Assegureu-vos que l'entrada PV voltage is at least 2V higher than battery voltage.
  • Verify solar panels are receiving adequate sunlight and are not shaded.
• La càrrega no funciona:
  • Comproveu les connexions de càrrega i assegureu-vos que estiguin ben fixades.
  • Verify load settings in the controller menu.
  • Assegureu-vos que la bateria voltage is sufficient to power the load.
• Fault LED Indicator On:
  • Consult the detailed fault codes in the complete product manual (not provided here) for specific error identification. Common faults include over-voltage, baix voltage, over-temperature, or short circuits.

8. Especificacions

Figure 5: Dimensions of the EPEVER 60A MPPT Solar Charge Controller: Length 340mm, Width 236mm, Height 119mm.

Figure 6: Detailed technical specifications for the EPEVER Tracer AN Series, including the 6415AN model.

9. Informació de la garantia

The EPEVER 60A MPPT Solar Charge Controller (Model 6415AN) comes with a manufacturer's warranty for 2 years from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

10. Suport

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact EPEVER customer support. Refer to the official EPEVER website for the most up-to-date contact information and additional resources, including detailed manuals and software downloads.