1. Introducció
The Beninca BE.CODE is a sophisticated wireless keypad designed for controlling automated systems without the need for physical wiring. This device offers a secure and convenient way to manage access to gates or other automated entry points.
Key features of the BE.CODE keypad include:
- Attractive Design with LED Backlight for enhanced visibility.
- Digital Keypad for precise code entry.
- Capacity for up to 250 unique codes, ranging from 1 to 9 digits in length.
- Compatibility with HCS, ARC, and fixed coding types, allowing all three to coexist simultaneously.
- Long-range wireless operation, extending up to 200 feet (approximately 60 meters).
- Powered by a long-lasting CR123A Lithium Battery, providing up to 7 years or 100 daily operations.
Figure 1: Beninca BE.CODE Wireless Access Control Keypad. This image shows the front view of the black keypad with numerical buttons (0-9) and an 'ENTER' button, along with the 'BENINCA' logo at the top.
2. Configuració i instal·lació
Before installation, ensure you have all necessary components and tools. The BE.CODE keypad is designed for easy setup, but proper placement is crucial for optimal performance.
2.1. Instal·lació de la bateria
- Locate the battery compartment on the rear of the keypad.
- Obriu la coberta del compartiment.
- Insert one CR123A Lithium Battery, ensuring correct polarity (+/-).
- Tanqueu bé la tapa del compartiment de la bateria.
Note: The CR123A battery provides extended life, up to 7 years or 100 daily operations, depending on usage.
2.2. Muntatge del teclat
- Choose a suitable mounting location that is within 200 feet of your Beninca receiver and protected from direct harsh weather if possible.
- Mark the drilling points using the keypad as a template.
- Perforar forats pilot als punts marcats.
- Fixeu el teclat numèric a la superfície amb els cargols adequats (no inclosos).
3. Instruccions de funcionament
The BE.CODE keypad allows for easy programming and operation of your automated system.
3.1. Codis de programació
The keypad supports up to 250 different user codes, each ranging from 1 to 9 digits. Refer to your Beninca receiver's manual for specific pairing and programming instructions, as the keypad acts as a transmitter.
- HCS, ARC, and Fixed Coding: The BE.CODE keypad is versatile and can transmit signals using HCS, ARC, or fixed coding types. All three types can be configured and used simultaneously on the same keypad.
- Entrada del codi: To activate your system, simply enter your pre-programmed code using the digital keypad and press the 'ENTER' button.
- Retroil·luminació LED: The integrated LED backlight illuminates the keys for easy use in low-light conditions.
3.2. Consideracions sobre l'abast
The keypad operates effectively up to 200 feet (approximately 60 meters) from the receiver. Environmental factors, such as walls, metal structures, and other wireless devices, may affect the actual operating range.
4. Manteniment
Regular maintenance ensures the longevity and optimal performance of your BE.CODE keypad.
4.1. Substitució de la bateria
When the keypad's performance degrades or the LED backlight dims, it may be time to replace the CR123A Lithium Battery. Follow the battery installation steps outlined in Section 2.1.
Desfeu-vos sempre de les piles usades de manera responsable d'acord amb la normativa local.
4.2. Neteja
Netegeu la superfície del teclat amb un drap suau iamp cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the keypad's electronics or finish.
5. Solució De Problemes
If you encounter issues with your BE.CODE keypad, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Keypad not responding or LED backlight dim. | Bateria baixa o esgotada. | Replace the CR123A Lithium Battery (refer to Section 4.1). |
| System not activating after code entry. | Incorrect code entered, keypad out of range, or receiver issue. | Verify the code. Ensure keypad is within 200ft range. Check receiver status and programming. Re-program the keypad with the receiver if necessary. |
| Rang de funcionament reduït. | Environmental interference, low battery, or obstruction. | Replace battery. Remove obstructions between keypad and receiver. Relocate keypad or receiver to improve line of sight. |
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb l'atenció al client.
6. Especificacions tècniques
| Model: | BE.CODE |
| Fabricant: | Beninca |
| Capacitat del codi: | Fins a 250 codis |
| Longitud del codi: | D'1 a 9 dígits |
| Coding Types: | HCS, ARC, Fixed (co-existing) |
| Interval sense fil: | Up to 200 ft (approx. 60 meters) |
| Tipus de bateria: | Bateria de liti CR123A |
| Durada estimada de la bateria: | Up to 7 years / 100 daily operations |
| Característiques: | LED Backlight, Digital Keypad |
| ASIN: | B07KRJPXFT |
| Data de primera disponibilitat: | 21 de novembre de 2018 |
7. Informació de la garantia
Specific warranty terms for the Beninca BE.CODE keypad are typically provided by the manufacturer or the authorized seller at the time of purchase. Please retain your proof of purchase for any warranty claims.
Per obtenir informació detallada sobre la garantia, es recomana:
- Consult the documentation included with your product packaging.
- Visit the official Beninca weblloc.
- Contact the seller from whom you purchased the product.
Note: Protection plans may be available from third-party providers, which are separate from the manufacturer's warranty.
8. Atenció al client
For technical assistance, troubleshooting, or any other inquiries regarding your Beninca BE.CODE Wireless Access Control Keypad System, please contact the following:
- Your Seller: For purchase-related questions or initial support, contact "Gate Openers and more" or the retailer from whom you acquired the product.
- Fabricant: Visit the official Beninca website for product manuals, FAQs, and contact information for their support department.
When contacting support, please have your product model (BE.CODE) and ASIN (B07KRJPXFT) readily available.
