1. Introducció
Thank you for choosing the DXQ FL-40 High Pressure Diaphragm Pump. This manual provides essential information for the proper installation, operation, and maintenance of your pump. Please read it thoroughly before use to ensure safe and efficient performance.
Figure 1: DXQ FL-40 High Pressure Diaphragm Pump
Característiques principals:
- Material durador: Constructed from high-strength cast iron with powder coating, ensuring waterproof and rust-resistant properties for long-term use.
- Powerful Automatic Pressure Pump: A fully automatic self-priming pump with a maximum flow rate of 17 L/min and an inlet PSI set to Max 40PSI (2.76Bar). Operates on 12V AC power.
- Protecció de seguretat: Features built-in thermal protection and automatic pressure protection. Designed for long service life with quiet operation and no leakage.
- Instal·lació ràpida: Compact size, lightweight design, and stable performance facilitate instant assembly.
- Aplicacions versàtils: Suitable for various uses including food and beverage filling, liquid transfer, clean machine requirements, road work, and cooling systems.
Figure 2: Wide range of applications for the FL-40 pump
2. Instruccions de seguretat
Always observe the following safety precautions to prevent injury or damage to the pump.
- Assegureu-vos que la font d'alimentació coincideixi amb el volum de la bombatage requisits (12V).
- Do not operate the pump with damaged wiring or connections.
- Avoid running the pump dry for extended periods, as this can cause damage.
- Ensure proper ventilation around the pump during operation.
- Do not use the pump for flammable liquids or in explosive atmospheres.
- Mantingueu les mans i la roba solta allunyades de les peces mòbils.
- Desconnecteu l'alimentació abans de realitzar qualsevol manteniment o resolució de problemes.
- The pump features built-in thermal protection to prevent overheating. If the pump stops unexpectedly, allow it to cool down before restarting.
Figure 3: Thermal Protection feature of the pump
3. Components inclosos
The DXQ FL-40 High Pressure Diaphragm Pump package typically includes the following components:
- 1 x Diaphragm Water Pump
- 1 x filtre
- 3 x Fittings (various types for connection)
Figure 4: Included filter and fittings
Figure 5: Key components and connections of the pump
4. Configuració i instal·lació
Follow these steps for quick and proper installation of your diaphragm pump:
- Muntatge: Securely mount the pump in a dry, well-ventilated area using the stable bracket. Ensure it is on a flat, stable surface to minimize vibration.
- Connexió d'entrada: Connect the water inlet hose to the designated inlet port (often labeled 'Inlet' or indicated by an arrow pointing towards the pump). It is recommended to install the included filter on the inlet line to prevent debris from entering the pump.
- Connexió de presa: Connect the water outlet hose to the designated outlet port (often labeled 'Outlet' or indicated by an arrow pointing away from the pump).
- Connexió elèctrica: Connect the pump's power wires to a 12V DC power source. Ensure correct polarity (red wire to positive, black wire to negative). It is advisable to install an inline fuse for protection.
- Encebar la bomba (si cal): While this is a self-priming pump, ensuring the inlet line is filled with water before the first use can aid in faster priming.
- Comproveu si hi ha fuites: After all connections are made, slowly introduce water into the system and check for any leaks at the fittings. Tighten connections as needed.
Figure 6: Fast assembly and water flow direction
5. Funcionament
Once installed, operating the DXQ FL-40 pump is straightforward:
- Inici de la bomba: Ensure all connections are secure and the power source is ready. Apply 12V DC power to the pump. The pump will begin to operate and self-prime.
- Funcionament automàtic: The pump is designed to automatically turn on when water is demanded (e.g., a faucet is opened) and turn off when the demand stops and pressure builds up in the system.
- Flow and Pressure: The pump delivers a maximum flow of 17 L/min and maintains pressure up to 40 PSI.
- Seguiment: Comproveu periòdicament la bomba per si hi ha sorolls, vibracions o fuites inusuals durant el funcionament.
6. Manteniment
Un manteniment regular garanteix la longevitat i el rendiment òptim de la bomba:
- Neteja de filtres: Regularly inspect and clean the inlet filter to prevent clogging and maintain optimal flow. Disconnect power, remove the filter housing, clean the mesh screen, and reassemble.
Figure 7: The included metal filter for debris prevention
- Comprovació de la connexió: Periodically check all hose and electrical connections for tightness and signs of wear.
- Hivernització (si escau): If the pump is used in an environment where temperatures drop below freezing, ensure it is drained completely or protected with RV antifreeze to prevent damage from freezing water.
- Neteja general: Keep the exterior of the pump clean and free from dirt and debris.
7. Solució De Problemes
Consulteu la taula següent per veure els problemes habituals i les seves solucions:
| Problema | Causa possible | Solució |
|---|---|---|
| La bomba no funciona | No power; Loose wiring; Blown fuse; Motor fault | Check power supply; Secure connections; Replace fuse; Contact support |
| Low flow or pressure | Clogged inlet filter; Kinked or restricted hose; Air in system; Low voltage | Clean filter; Straighten hose; Bleed air from system; Check power supply |
| La bomba funciona contínuament | Leak in system; Pressure switch malfunction; Open faucet | Check for leaks and repair; Contact support for pressure switch; Close all faucets |
| La bomba és sorollosa | Air in system; Loose mounting; Debris in pump | Bleed air; Secure mounting; Disconnect power and inspect pump (if safe) |
| Fuites d'aigua de la bomba | Loose fittings; Damaged seals/diaphragm | Tighten fittings; Contact support for seal replacement |
8. Especificacions tècniques
Detailed specifications for the DXQ FL-40 Diaphragm Pump:
| Especificació | Valor |
|---|---|
| Fabricant | BananaB (DXQ) |
| Número de model | FL-40GMB12V000001 |
| Dimensions del producte | 36 x 12 x 10 cm (aprox. 14.2 x 4.7 x 3.9 polzades) |
| Pes | 2.4 kg (aprox. 5.3 lliures) |
| Color | Negre |
| Estil | Diafragma |
| Material | Ferro colat |
| Font d'alimentació | 12V DC |
| Voltage | 12 Volts |
| Caudal màxim | 17 litres per minut |
| Pressió màxima | 40 PSI (2.76 bar) |
| Alçada màxima d'elevació | 2 metres |
| Piles incloses? | No |
| Necessites piles? | No |
Figure 8: Pump dimensions
Figure 9: Durable Cast Iron Material
9. Informació de la garantia
For specific warranty terms and conditions, please refer to the product packaging or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.
10. Atenció al client
If you encounter any issues not covered in this manual or require further assistance, please contact the seller or manufacturer through the platform where you purchased the product. Provide your model number and a detailed description of the issue for faster service.
