1. Introducció
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Utilitech 65W Equivalent 3000K LED Warm White Recessed Light. Please read these instructions thoroughly before installation and retain them for future reference.
2. Informació de seguretat
Always follow basic safety precautions when installing or maintaining electrical products to reduce the risk of fire, electric shock, and personal injury.
- ADVERTIMENT: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans d'instal·lar o fer el servei.
- Aquest producte s'ha d'instal·lar d'acord amb el codi d'instal·lació aplicable per una persona familiaritzada amb la construcció i el funcionament del producte i els perills que comporta.
- Assegureu-vos el subministrament voltage is correct (120V AC).
- Do not attempt to modify the fixture. Any alterations may void the warranty and create a safety hazard.
- Apte per al seu ús en damp o llocs humits.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- 1 x Utilitech 65W Equivalent 3000K LED Recessed Light Fixture
- 1 x Medium-based screw-in adapter (pre-attached)
- Friction clips (pre-attached)
- Maquinari de muntatge
This image displays the Utilitech 65W Equivalent 3000K LED Warm White Recessed Light. It shows the integrated LED fixture, the attached medium-based screw-in adapter, and the friction clips designed for secure installation in compatible housings.
4. Configuració i instal·lació
4.1. Abans de començar
- Apagueu l'alimentació a l'interruptor o a la caixa de fusibles.
- Ensure the existing recessed housing is compatible (most 5-inch or 6-inch new construction and remodel housings).
- Utilitzeu l'equip de seguretat adequat, inclosos guants i protecció ocular.
4.2. Passos d'instal·lació
- Preparar l'habitatge: Ensure the existing recessed housing is clear of debris and any old trim or bulb has been removed.
- Connecteu l'adaptador: Screw the medium-based screw-in adapter (E26 base) into the socket of your existing recessed housing. Ensure it is securely tightened.
- Connect the LED Fixture: Plug the LED connector from the recessed light fixture into the adapter. Ensure a firm connection.
- Insert into Housing: Gently push the LED recessed light fixture into the housing. The friction clips will engage with the housing to hold the fixture securely in place. Ensure the fixture sits flush with the ceiling.
- Restaura l'alimentació: Un cop instal·lat el dispositiu de manera segura, restableu l'alimentació a l'interruptor.
- Prova: Engegueu l'interruptor de la llum per confirmar el funcionament correcte.
5. Instruccions de funcionament
The Utilitech LED Recessed Light operates like a standard light fixture. Simply use your wall switch to turn the light on or off.
Funcionalitat d'atenuació: This fixture is dimmable with most 120-volt incandescent, magnetic low-voltage, or electronic low-voltage dimmers. For optimal performance, ensure your dimmer switch is compatible with LED lighting. Refer to your dimmer's instructions for specific operation.
6. Manteniment
The Utilitech LED Recessed Light is designed for long-lasting, maintenance-free operation. The integrated LED is not user-replaceable.
- Neteja: Ensure power is off before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- Sense peces reparables per l'usuari: There are no user-serviceable parts inside this fixture. Do not attempt to open or repair the unit.
7. Solució De Problemes
If you experience issues with your LED recessed light, refer to the table below for common problems and solutions.
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No hi ha energia a l’aparell. | Comproveu l'interruptor o el fusible. Assegureu-vos que l'interruptor de paret estigui engegat. |
| Connexió fluixa. | Turn off power, then check the screw-in adapter and LED connector for secure connections. | |
| La llum parpelleja o s'atenua inesperadament. | Interruptor regulador d'intensitat incompatible. | Ensure dimmer is compatible with LED lighting. Replace if necessary. |
| Cablejat solt. | Apagueu l'alimentació i comproveu totes les connexions elèctriques. | |
| Light is not flush with the ceiling. | Friction clips not fully engaged. | Gently push the fixture further into the housing until the clips fully engage. |
8. Especificacions
Key technical specifications for the Utilitech 65W Equivalent 3000K LED Warm White Recessed Light:
| Característica | Especificació |
|---|---|
| Marca | Utilitech |
| Model | 65W-3000K-LED-Recessed-Light |
| Wattage | 10.5 watts (equivalent a 65 watts) |
| Brillantor | 650 lúmens |
| Temperatura de color | 3000 Kelvin (Blanc càlid) |
| Voltage | 120 Volts |
| Base del bulb | E26 Medium (screw-in adapter) |
| Regulable | Yes (with compatible dimmers) |
| Ús interior/exterior | Outdoor (Suitable for damp or wet locations) |
| Material | Alumini |
| Pes de l'article | 1.09 lliures |
| Dimensions del paquet | 7.87 x 7.44 x 3.5 polzades |
| UPC | 696630001182 |
9. Garantia i Suport
For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact Utilitech customer service. Keep your purchase receipt as proof of purchase.
