LightShark LS-1 8-Universe Lighting Control System User Manual

1. Introducció

The LightShark LS-1 is an advanced 8-Universe Lighting Control System designed for professional lighting applications. It features a wireless, web-based user interface accessible from any smartphone, tablet, or computer, providing flexible control. The system integrates physical faders and encoders for tactile operation and includes an independent DMX engine capable of controlling up to eight DMX universes. Users can connect up to three devices simultaneously to create a comprehensive multi-screen control environment.

2. Què hi ha a la caixa

Upon unpacking your LightShark LS-1, please ensure all components are present and in good condition. The package should contain:

LightShark LS-1 Control System Unit
Physical faders and encoders (integrated)
Device connection cables (e.g., power cable, USB cable)

3. Configuració

Follow these steps to set up your LightShark LS-1 system:

Connexió d'alimentació: Connect the provided power cable to the 'POWER' input on the rear panel of the LS-1 unit. Plug the other end into a suitable power outlet (90-264 VAC / 35W). Ensure the power switch is in the 'OFF' position before connecting.
Sortida DMX: Connect your DMX lighting fixtures to the 'DMX 1' and 'DMX 2' 5-pin XLR output ports on the rear panel. The LS-1 supports up to 8 DMX universes.
Connexió de xarxa: For wired network access, connect an Ethernet cable from your network router or switch to the 'ARTNET / LAN' port. For wireless access, ensure the Wi-Fi antenna is securely attached to the designated port on the rear panel.
USB Data: Use the 'DATA' USB ports for connecting external storage devices or other compatible accessories.
Encès: Flip the 'POWER' switch to the 'ON' position. The system will initiate its startup sequence.

Rear panel of the LightShark LS-1 showing power input, DMX outputs, LAN/ArtNet port, USB data ports, and Wi-Fi antenna. — Figure 3.1: Rear panel connections of the LightShark LS-1. This image displays the power input, DMX outputs (5-pin XLR), LAN/ArtNet port, USB data ports, and the Wi-Fi antenna connection point.

4. Instruccions de funcionament

The LightShark LS-1 offers flexible control through its web-based interface and integrated physical controls.

4.1. Accedint al Web-Based User Interface (UI)

Connexió sense fil: On your smartphone, tablet, or computer, connect to the Wi-Fi network broadcast by the LS-1 (SSID and password typically found on the unit or in initial setup documentation).
Connexió per cable: Ensure your device is connected to the same local area network as the LS-1 via the 'ARTNET / LAN' port.
Launch Browser: Obre a web browser (e.g., Chrome, Firefox, Safari) and enter the IP address of the LS-1 (refer to the initial setup guide or network settings for the default IP). The LightShark UI will load, allowing you to control your lighting system.

4.2. Using Physical Controls

The LS-1 features a dedicated control surface with physical faders, encoders, and buttons for direct manipulation of lighting parameters.

Faders: Adjust intensity levels, playback cues, or other assigned parameters.
Codificadors: Rotate to fine-tune values for attributes such as color, position, or effects.
Botons: Trigger specific functions, select fixtures, or navigate through menus.

The physical controls are seamlessly integrated with the web-based UI, providing a hybrid control experience. Changes made on one interface will be reflected on the other.

Primer pla view of the LightShark LS-1 control surface, showing faders, encoders, and various control buttons. — Figure 4.1: LightShark LS-1 control surface. This image highlights the physical faders, rotary encoders, and various buttons used for direct control of lighting parameters.

4.3. Multi-Screen Control

The LS-1 allows connection of up to three devices simultaneously. This enables a multi-screen setup where different aspects of the lighting control (e.g., fixture control, cue lists, effects engine) can be displayed and managed on separate screens, enhancing workflow efficiency.

5. Manteniment

Proper maintenance ensures the longevity and optimal performance of your LightShark LS-1.

Neteja: Regularly clean the exterior of the unit with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, ensuring no liquid enters the device. Avoid abrasive cleaners or solvents.
Actualitzacions de programari: Periodically check the LightShark official website for firmware and software updates. Keeping your system updated ensures access to the latest features, bug fixes, and performance improvements. Follow the instructions provided with the update package carefully.
Condicions ambientals: Operate the LS-1 in a clean, dry environment, away from extreme temperatures, humidity, and direct sunlight. Ensure adequate ventilation around the unit.

6. Solució De Problemes

If you encounter issues with your LightShark LS-1, refer to the following common problems and solutions:

Sense energia:
- Ensure the power cable is securely connected to both the LS-1 and a working power outlet.
- Verify the power switch on the rear panel is in the 'ON' position.
- Check the power outlet with another device to confirm it is functional.
No DMX Output:
- Confirm DMX cables are correctly connected to the LS-1 and your lighting fixtures.
- Verify that fixtures are addressed correctly and patched within the LightShark UI.
- Check DMX settings within the LightShark UI to ensure universes are enabled and configured.
Cannot Connect to Web IU:
- If using Wi-Fi, ensure your device is connected to the LS-1's Wi-Fi network.
- If using a wired connection, ensure your device and the LS-1 are on the same network and the Ethernet cable is properly connected.
- Verify the IP address entered in the web browser is correct. Try clearing your browser's cache.
- Restart the LS-1 unit and your connecting device.
Physical Controls Unresponsive:
- Ensure the unit is powered on and fully booted.
- If specific controls are unresponsive, try restarting the unit.
- Ensure no foreign objects are obstructing the movement of faders or encoders.

If problems persist after attempting these solutions, please contact LightShark customer support or your authorized dealer for further assistance.

7. Especificacions

Característica	Especificació
Número de model	LS-1
Univers DMX	8
Material del cos	Plàstic
Tipus de connector	5-pin XLR (DMX)
Pes de l'article	0.01 unces
Entrada de potència	90-264 VAC / 35W
Primera data disponible	25 de març de 2019

8. Garantia i Suport

For information regarding the warranty coverage for your LightShark LS-1, please refer to the warranty card included with your product or visit the official LightShark weblloc web. Els termes i condicions de la garantia poden variar segons la regió i el distribuïdor.

For technical support, service, or spare parts, please contact your authorized LightShark dealer or the LightShark customer support team. Contact details can typically be found on the manufacturer's weblloc.

	Lightshark LS-Core and LS-1 Quick Guide - Box Contents This quick guide details the box contents for the Lightshark LS-Core and LS-1 lighting controllers, including essential accessories and important notes for setup.
	Manual de servei de la màquina de cosir Brother: LS-2220 i altres models Manual de servei complet per a les màquines de cosir en ziga-zaga Brother LS-2220 i LS-2720, que cobreix informació general, manteniment, ajustos i resolució de problemes. Inclou instruccions detallades per a diversos components i configuracions.
	Manual de servei de la màquina de cosir Brother: Ajustos i manteniment del model Manual de servei complet per a màquines de cosir Brother, que cobreix els ajustos detallats per a models com LS-2220, LS-2720, LS-3000 i més, incloent-hi la configuració de l'oscil·lació de l'agulla, l'elevació del bucle i la tensió.
	Manual de servei de la màquina de cosir Brother: LS-2220, LS-2150, LS-2720 i més Manual de servei complet per a màquines de cosir de puntada en zig-zag Brother, que cobreix models com LS-2220, LS-2150, LS-2720, LS-2125i, LS-2820, LS-2125b, LS-2920, SL-7, LS-2320, JS-23, LS-2725, VX-1435, LS-2825, X-5, LS-1520, LX-3125, LS-2020, LS-3125, LS-2125, LS-3000, LS-2129, LS-5000, LS-2130. Inclou ajustos detallats, estàndards i procediments de manteniment per a un rendiment òptim.
	Manual d'instruccions i guia de garantia de l'inversor Latronics sèrie LS Manual d'instruccions complet per als inversors d'ona sinusoidal de la sèrie LS de Latronics (500 W - 1800 W). Cobreix la instal·lació, el funcionament, la seguretat, el manteniment, la resolució de problemes i el registre de la garantia per a solucions d'energia fiables.

LightShark LS-1