1. Producte acabatview
This manual provides essential information for the safe and effective use of your Seilylanka 4/5SC 3000mAh Ni-MH Battery Pack. This battery pack is designed for self-installation and is compatible with various Black & Decker tools, specifically models KC 9036 and KC 9039.
The battery pack consists of three 4/5 Sub C Ni-MH cells, providing a nominal voltage of 3.6 volts and a capacity of 3000mAh. Please note that this is a semi-finished product intended for self-installation, which may require some assembly or modification to fit your specific tool.
Image 1.1: Seilylanka 4/5SC 3000mAh Ni-MH Battery Pack, showing the three connected cells.
2. Informació de seguretat
Llegiu i comprengueu sempre tots els avisos i instruccions de seguretat abans d'utilitzar aquest producte. Si no seguiu els avisos i les instruccions, podeu patir descàrregues elèctriques, incendis i/o lesions greus.
2.1 General Battery Safety
- No desmunteu, obriu ni esmicoleu la bateria.
- No exposeu la bateria a la calor o al foc. Eviteu l'emmagatzematge a la llum solar directa.
- No curtcircuiteu una bateria. No emmagatzemeu els paquets de bateries a l'atzar en una caixa o calaix on es puguin curtcircuitar entre si o amb materials conductors.
- No sotmeti la bateria a cops mecànics.
- En cas de fuita d'una bateria, no permeteu que el líquid entri en contacte amb la pell o els ulls. Si hi ha hagut contacte, renteu la zona afectada amb aigua abundant i consulteu un metge.
- Mantingueu la bateria neta i seca.
- No utilitzeu cap carregador que no sigui el proporcionat específicament per al seu ús amb l'equip.
- Observeu les marques més (+) i menys (-) de la bateria i l'equip i assegureu-vos d'utilitzar-los correctament.
- Mantingueu la bateria fora de l'abast dels nens.
2.2 Ni-MH Specific Warnings
- Use only chargers designed for Ni-MH batteries. Using an incompatible charger can damage the battery or cause fire.
- Do not overcharge or deep discharge Ni-MH batteries. Follow recommended charging cycles.
- Ni-MH batteries can get warm during charging and discharging. Ensure adequate ventilation.
3. Configuració i instal·lació
This battery pack is designed for self-installation into compatible Black & Decker tools. Due to its nature as a semi-finished product, some modifications or specific wiring may be required to integrate it correctly into your device. It is recommended that installation be performed by individuals with appropriate technical knowledge or experience in electronics and tool repair.
3.1 Preparació
- Ensure the tool is disconnected from any power source and is turned off.
- Gather necessary tools for disassembly of your Black & Decker device (e.g., screwdrivers, soldering iron if required, wire cutters, heat shrink tubing).
- Carefully remove the old battery pack from your tool, noting its orientation and wiring connections.
3.2 Passos d'instal·lació
- Compare the new Seilylanka battery pack with the original battery pack. Note any differences in size or terminal configuration. The cells are approximately 33x23mm each.
- If necessary, transfer or adapt the original wiring harness and connectors to the new battery pack. Ensure correct polarity (+ and -).
- Securely place the new battery pack within the tool's battery compartment. Ensure it fits without excessive force or bending of components.
- Reconnect any internal wiring, ensuring all connections are secure and insulated to prevent short circuits.
- Carefully reassemble the tool, ensuring all screws are tightened and casing is properly aligned.
Image 3.1: Battery pack showing approximate dimensions (33x22mm per cell), useful for fitment.
Important: As this is a self-installation product, the final fit and performance may vary slightly from the original battery. Exercise caution and ensure all connections are correct before first use.
4. Funcionament de la bateria
Once installed, the battery pack functions as the power source for your compatible Black & Decker tool. Proper charging and discharge practices will ensure optimal performance and longevity.
4.1 Càrrec inicial
It is recommended to fully charge the battery pack before its first use after installation. Use a charger compatible with 3.6V Ni-MH battery packs.
4.2 Càrrega
- Always use a charger specifically designed for Ni-MH batteries with the correct voltage (3.6 V).
- Carregueu la bateria en una zona ben ventilada, allunyada de materials inflamables.
- Do not leave batteries on charge indefinitely. Follow the charger's instructions for charge times.
- It is normal for Ni-MH batteries to become warm during charging. If the battery becomes excessively hot, discontinue charging immediately.
4.3 Discharging and Use
- Use the tool as per its original operating instructions.
- Avoid completely draining the battery pack. While Ni-MH batteries are less prone to memory effect than Ni-Cd, deep discharges can still reduce overall lifespan.
- If the tool's performance noticeably decreases, it's time to recharge the battery.
5. Manteniment i emmagatzematge
Proper maintenance and storage will extend the life of your Ni-MH battery pack.
5.1 Neteja
- Keep the battery pack and its terminals clean. Use a dry, clean cloth to wipe off any dust or debris.
- Do not use liquids or solvents for cleaning.
5.2 Emmagatzematge
- Store the battery pack in a cool, dry place, away from direct sunlight, heat sources, and moisture.
- For long-term storage, it is best to store Ni-MH batteries with a partial charge (around 40-50% of capacity) rather than fully charged or fully discharged.
- If storing for extended periods, periodically check the battery and recharge it to maintain a partial charge every few months.
- Keep the battery pack away from metallic objects that could short-circuit the terminals.
6. Solució De Problemes
If you encounter issues with your battery pack, refer to the following common problems and solutions.
| Problema | Causa possible | Solució |
|---|---|---|
| La bateria no es carrega | Incorrect charger; poor connection; faulty battery cells; charger malfunction. | Ensure charger is compatible and properly connected. Check battery terminals for corrosion. If possible, test with another known-good charger. |
| Tool not powering on or weak performance | Battery not fully charged; incorrect installation; battery degradation. | Fully charge the battery. Recheck installation and wiring connections. If battery is old, it may need replacement. |
| Battery pack gets excessively hot during use/charging | Overload; internal short; faulty cells; improper charging. | Discontinue use/charging immediately. Allow to cool. Check for internal damage or short circuits during installation. Ensure charger is appropriate. |
| Battery pack does not fit correctly | Minor size difference; incorrect model. | Verify the model number. Small adjustments to the tool's compartment or battery pack's outer casing might be necessary for self-installation. |
Si els problemes persisteixen després d'intentar aquestes solucions, poseu-vos en contacte amb el servei d'atenció al client per obtenir més ajuda.
7. Especificacions
| Especificació | Valor |
|---|---|
| Marca | Seily Lanka |
| Número de model | RD-BD3.6VB(W) |
| Tipus de bateria | Ni-MH (hidrur de níquel-metall) |
| Voltage | 3.6 Volts |
| Capacitat | 3000 milionsampabans de l'hora (mAh) |
| Configuració cel·lular | 3x 4/5 Sub C cells |
| Approx. Cell Dimensions (each) | 33 mm x 23 mm |
| Pes de l'article | 5.3 unces |
| Eines compatibles | Black & Decker KC 9036, KC 9039 |
| Ús recomanat | Power Tool Battery Replacement |
| Fabricant | Runda |
| Data de primera disponibilitat | 7 de desembre de 2018 |
8. Garantia i Suport
This product is a semi-finished component intended for self-installation. Please refer to the seller's return policy for details on returns and refunds. The buybox winner offers a 30-day return policy.
For technical support or inquiries regarding the product, please contact the seller directly through the platform where the purchase was made. Provide your order number and a detailed description of the issue for prompt assistance.
