Manual d'usuari del nivell làser de línia creuada de feix verd STANLEY FATMAX FMHT77586-1

1. Introducció

Thank you for choosing the STANLEY FATMAX FMHT77586-1 Green Beam Cross Line Laser Level. This precision instrument is designed to project bright, clear green laser lines for various leveling and alignment tasks. This manual provides essential information for safe operation, proper setup, and effective use of your laser level. Please read it thoroughly before first use and keep it for future reference.

2. Informació de seguretat

ADVERTIMENT: This is a Class 2 laser product. Avoid direct eye exposure to the laser beam. Do not stare into the beam. Do not intentionally direct the laser beam at other people or reflective surfaces.

• Always operate the laser level in a safe manner, following all instructions in this manual.
• Do not attempt to modify or disassemble the laser level. This can cause serious injury and will void the warranty.
• Keep the laser level out of reach of children and untrained personnel.
• Ensure the work area is free from obstructions and potential hazards.
• Use only the specified battery type (AA alkaline batteries) and ensure correct polarity.
• Traieu les piles si no heu d'utilitzar el dispositiu durant un període prolongat per evitar fuites.
• Protect the device from extreme temperatures, moisture, and direct sunlight.

3. Contingut del paquet

En desembalar, comproveu que tots els elements que s'enumeren a continuació siguin presents i no estiguin danyats:

• STANLEY FATMAX FMHT77586-1 Green Beam Cross Line Laser Level
• Bossa de transport suau
• L-Bracket (Magnetic Mounting Bracket)
• 4 piles alcalines AA
• Laser Target Plate (if included, often a small white plate)
• Manual d'usuari (aquest document)

Figura 1: Contents of the STANLEY FATMAX FMHT77586-1 package, including the laser level, carrying pouch, L-bracket, and batteries.

4. Producte acabatview

The STANLEY FATMAX FMHT77586-1 is a robust and accurate cross line laser level designed for professional and DIY applications. Key features include:

• Green Laser Diode: Utilizes a 510-530 Nm Class 2 green laser for enhanced visibility.
• Wide Cross Line Projection: Projects a 150° wide cross line, offering extensive surface coverage.
• Self-Leveling System: Automatically levels within a 4° range in approximately 5 seconds.
• Pendulum Lock: Secures the pendulum during transport to prevent damage and allows for manual mode operation for angled lines.
• Base magnètica: Features a magnetic base for direct attachment to metal structures.
• Mode receptor: A dedicated button activates receiver mode, extending the working range up to 50 meters with an optional laser receiver.
• Construcció duradora: Rubber-coated housing provides IP54 protection against dust and splashing water.
• Opcions de muntatge: Equipped with 1/4" and 5/8" tripod threads for versatile mounting.

Figura 2: Side profile of the laser level, showcasing its durable design.

5. Configuració

5.1 Instal·lació de la bateria

1. Locate the battery compartment cover on the back or bottom of the laser level.
2. Obriu la coberta fent-la lliscar o desenganxant-la.
3. Introduïu 4 piles alcalines AA, assegurant-vos de la polaritat correcta (+/-) tal com s'indica a l'interior del compartiment.
4. Tanqueu bé la tapa del compartiment de la bateria.

5.2 Muntatge del nivell làser

The FMHT77586-1 offers several mounting options:

• Superfície plana: Col·loqueu el nivell làser directament sobre una superfície estable i plana.
• Muntatge del trípode: Attach the laser level to a tripod using the 1/4" or 5/8" thread on the bottom of the unit.
• Muntatge magnètic: Use the included L-bracket to attach the laser level to metal surfaces. The L-bracket has strong magnets for secure attachment.

Figura 3: Laser level mounted using an L-bracket, projecting a horizontal line for alignment.

6. Instruccions de funcionament

6.1 Powering On and Self-Leveling Mode

1. Unlock the pendulum by sliding the lock switch to the unlocked position.
2. Press the power button (usually marked with a power symbol) to turn on the laser level.
3. The laser level will automatically begin self-leveling. This typically takes about 5 seconds.
4. Once leveled, the laser lines will emit a steady green light. If the device is outside its 4° self-leveling range, the laser lines may flash or an indicator light may illuminate, signaling that the device needs to be repositioned.

6.2 Switching Laser Modes

Press the mode button (often marked with a laser symbol or 'M') to cycle through different laser line configurations:

• Només línia horitzontal
• Vertical Line Only
• Cross Line (Horizontal and Vertical)

Figura 4: Interacting with the control panel to select laser modes.

6.3 Mode manual (pèndol bloquejat)

To project angled lines, keep the pendulum locked. When the pendulum is locked, the self-leveling function is deactivated, and the laser lines can be projected at any angle. The laser lines may flash to indicate that it is in manual mode and not self-leveling.

6.4 Mode receptor

For outdoor use or in bright conditions, activate receiver mode by pressing the dedicated receiver button (often marked with a signal icon). This increases the pulse rate of the laser, allowing it to be detected by an optional laser receiver for extended range (up to 50m). An indicator light will typically confirm receiver mode is active.

Figura 5: Laser level in operation, projecting precise green cross lines for measurement.

6.5 Apagat

To turn off the laser level, press the power button again. Always engage the pendulum lock before storing or transporting the device to protect the internal mechanism.

7. Manteniment

• Neteja: Wipe the laser level with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the laser apertures are clean for optimal beam clarity.
• Emmagatzematge: Store the device in its carrying pouch in a dry, cool place, away from direct sunlight. Always engage the pendulum lock before storage.
• Cura de la bateria: Remove batteries if the device will not be used for an extended period to prevent corrosion from battery leakage.
• Comprovació de calibratge: Periodically check the calibration of your laser level. Refer to the full product manual or STANLEY FATMAX support for detailed calibration procedures if needed.

8. Solució De Problemes

9. Especificacions

10. Garantia i Suport

STANLEY FATMAX products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official STANLEY FATMAX weblloc web. Conserveu el rebut de compra com a comprovant de compra.

For further assistance, please contact STANLEY FATMAX customer service.