Introducció
This manual provides detailed instructions for the setup, operation, and maintenance of your Pyle PSLSW6 6-Channel Speaker Selector Switch. This device allows you to connect and control up to six pairs of speakers from a single stereo amplifier or receiver, offering independent volume control for each speaker zone. Please read this manual thoroughly before use to ensure proper installation and optimal performance.
Característiques del producte
- Convenient audio control for up to 6 pairs of speakers.
- Supports home theater stereo ampsistemes de filtració.
- Independent audio source channel volume controls for each speaker pair.
- Input/Output: Screw-type connector terminals.
- Compact desktop/tabletop receiver design.
- Front panel button control center.
- Master power switch.
- Built-in electronic overload protection circuitry.
Instruccions de seguretat
To reduce the risk of electric shock, fire, or damage to your equipment, please observe the following precautions:
- No obriu la unitat casing. No hi ha peces a l'interior que l'usuari pugui reparar. Demaneu totes les tasques de manteniment a personal qualificat.
- Ensure all connections are secure and correctly polarized before powering on your amplificador/receptor.
- No exposeu la unitat a la humitat, la pluja o les temperatures extremes.
- Place the unit on a stable, flat surface with adequate ventilation.
- Apagueu sempre el vostre amplifier/receiver before making or changing any connections to the speaker selector.
- Use speaker wire of appropriate gauge (up to 14 AWG) for optimal performance and safety.
Configuració i instal·lació
Follow these steps to correctly set up your Pyle PSLSW6 speaker selector switch:
1. Desembalatge i col·locació
Carefully remove the PSLSW6 from its packaging. Place the unit on a stable, level surface near your stereo receiver or amplifier. Ensure there is sufficient space for cable connections and ventilation.
Figura 1: Frontal view of the Pyle PSLSW6 speaker selector switch, showing the six volume controls and master power switch.
Figure 2: Dimensions of the Pyle PSLSW6 unit, measuring 16.9 inches in length, 6.3 inches in width, and 3.0 inches in height.
2. Connecting Your Ampmés viu / receptor
Locate the speaker outputs on your stereo amplifier or receiver. Connect the left and right outputs from your amplifier/receiver to the "A AMP" or "B AMP" inputs on the rear of the PSLSW6 using appropriate speaker wire (up to 14-gauge). Ensure correct polarity (positive to positive, negative to negative).
Figura 3: Primer pla view of the screw-type connector terminals on the rear of the PSLSW6, designed for secure speaker wire connections.
3. Connecting Your Speakers
Connect up to six pairs of speakers to the corresponding "SPEAKER OUTPUTS" terminals (1 through 6) on the rear of the PSLSW6. Again, observe correct polarity for each speaker pair. The unit supports up to 100 watts MAX per audio/speaker channel.
Figure 4: Diagram illustrating the connection of a stereo receiver to the PSLSW6 inputs and six pairs of speakers to the corresponding outputs.
Funcionament
Once all connections are made, you can begin operating your PSLSW6 speaker selector switch.
1. Interruptor d'alimentació principal
The master power switch, located on the front panel, controls the overall power to the unit. Ensure this switch is in the "ON" position for the unit to function.
Figure 5: Close-up of the front panel, highlighting the master power switch on the left and the individual volume controls for each speaker zone.
2. Speaker Selection and Volume Control
Each of the six channels has an independent volume control knob and a corresponding A/B switch. To activate a speaker pair, turn its volume knob from "OFF" towards "MAX" and ensure the A/B switch is engaged. You can activate multiple speaker pairs simultaneously and adjust their volumes independently to customize your listening experience in different zones.
The unit also features an "ALL SPEAKERS" switch, which can be used to quickly enable or disable all connected speaker pairs.
Manteniment
The Pyle PSLSW6 is designed for long-term reliability and requires minimal maintenance.
- Neteja: Use a soft, dry cloth to clean the exterior of the unit. Avoid using harsh chemicals or abrasive cleaners.
- Ventilació: Ensure that the ventilation slots on the unit are not obstructed to prevent overheating.
- Connexions: Periodically check all speaker wire connections to ensure they remain secure. Loose connections can lead to poor sound quality or intermittent audio.
Resolució de problemes
If you encounter issues with your PSLSW6, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha so dels altaveus. |
|
|
| So distorsionat o de mala qualitat. |
|
|
| Volume levels are inconsistent between channels. |
|
|
Especificacions
- Model: PSLSW6
- Tipus de selector d'altaveus: 6-Canals
- Maneig de potència: 100 watts MÀXIM per canal d'àudio/altaveu
- Suport del cable de l'altaveu: Fins a calibre 14 (14 AWG)
- Impedància mínima: <8 Ohm
- Resposta de freqüència: 20Hz-20kHz
- Dimensions (L x A x P): 16.9 cm x 6.3 cm x 3.0 cm polzades
- Pes de l'article: 9.78 lliures
- Color: Negre
- Tipus de connector: Cargol
- Dispositius compatibles: Home Theater Receiver, Stereo System
Garantia i Suport
Per obtenir informació sobre la garantia i assistència tècnica, consulteu la pàgina oficial de Pyle. weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra.
You can visit the Pyle Store for more information: Pyle Official Store
