Introducció
This manual provides essential information for the safe and efficient use of your WilTec Foldable Platform Cart. Please read these instructions carefully before assembly and operation. Keep this manual for future reference.
The WilTec Foldable Platform Cart is designed to assist with transporting heavy loads up to 150 kg, reducing physical strain during tasks such as moving, storage, warehousing, and gardening. Its foldable handle allows for compact storage and easy transport.
Instruccions de seguretat
- No supereu la capacitat de càrrega màxima de 150 kg.
- Ensure the handle is securely locked in place before moving the cart.
- Distribute the load evenly on the platform to maintain stability.
- Avoid using the cart on uneven or excessively sloped surfaces.
- Mantingueu les mans i els peus allunyats de les parts mòbils, especialment durant el plegat i el desplegat.
- Regularly inspect the wheels and frame for any signs of damage or wear.
- This cart is not designed for transporting people.
Característiques del producte
- Mànec plegable: For compact storage and easy transport.
- Alta capacitat de càrrega: Supports up to 150 kg.
- Plataforma antilliscant: Rubberized surface ensures secure load placement.
- Construcció duradora: Alloy steel frame with edge protection.
- Maneuverable Wheels: Four wheels, including swivel and fixed types, for easy navigation.
Muntatge i muntatge
The WilTec Foldable Platform Cart comes largely pre-assembled. Minimal setup is required to prepare it for use.
Desplegant el mànec
Place the cart on a flat, stable surface. Locate the foldable handle mechanism at the front of the platform. Gently pull the handle upwards until it clicks into its fully upright and locked position. Ensure both locking pins on either side of the handle are engaged.
Image: The WilTec platform cart shown in its fully unfolded and ready-to-use position, with the handle extended upwards.
Inspecting the Wheels
Before first use, check that all four wheels are securely attached and rotate freely. The cart features two swivel wheels for maneuverability and two fixed wheels for stability.
Imatge: Una part inferior view of the platform cart, illustrating the attachment points and design of the four wheels.
Instruccions de funcionament
Loading the Cart
Place items centrally on the rubberized platform. Ensure the weight is distributed evenly to prevent tipping. Do not stack items higher than the handle, and secure unstable loads if necessary.
Moure el carro
Grasp the handle firmly and push or pull the cart. The swivel wheels at the front (or rear, depending on orientation) allow for easy steering. Navigate obstacles carefully.
Plegable per a emmagatzematge
To fold the handle, locate the release mechanism (usually a foot pedal or hand lever) at the base of the handle. Engage the mechanism and gently push the handle downwards until it lies flat against the platform. Ensure it is fully folded for compact storage.
Image: The WilTec platform cart with its handle folded down, demonstrating its compact storage configuration.
Manteniment
- Neteja: Esborra el carretó amb anuncisamp cloth to remove dirt and debris. Avoid harsh chemicals that may damage the finish or rubberized surface.
- Lubricació: Periodically apply a small amount of lubricant to the wheel axles and handle folding mechanism to ensure smooth operation.
- Inspecció: Regularly check all bolts, nuts, and moving parts for tightness and wear. Tighten any loose fasteners. Replace worn or damaged wheels immediately.
- Emmagatzematge: Store the folded cart in a dry place to prevent rust and prolong its lifespan.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Cart difficult to steer | Wheels are dirty or stiff; uneven load distribution. | Clean wheels and lubricate axles. Redistribute load evenly. |
| Handle does not lock in upright position | Locking pins are obstructed or damaged. | Check for debris in the locking mechanism. Ensure handle is fully extended. If damaged, contact support. |
| Soroll excessiu durant el moviment | Loose wheels or worn bearings. | Tighten wheel bolts. Lubricate wheel bearings. Replace wheels if necessary. |
Especificacions
| Marca | WilTec |
| Números de model | 61082, WTC-PLAT-150-BLK |
| Material | Acer d'aliatge |
| Color | Blue, Black, White |
| Dimensions (L x A x A) | 72 x 47.5 x 84 cm (desplegat) |
| Pes de l'article | 6.76 quilos |
| Capacitat de càrrega màxima | 150 quilos |
| Nombre de rodes | 4 (2 swivel, 2 fixed) |
| Tipus de roda | Pivotante (Swivel) |
Image: A technical diagram illustrating the key dimensions of the WilTec platform cart, including length, width, height, and wheel diameter.
Garantia i devolucions
This product is covered by a standard return policy. For specific details regarding warranty coverage and return procedures, please refer to your purchase documentation or contact the seller directly. Generally, returns are accepted within 30 days for refund or replacement.
Atenció al client
For further assistance, technical support, or inquiries regarding spare parts, please contact WilTec Wildanger Technik GmbH, the manufacturer and seller of this product.
Please have your model number (61082 or WTC-PLAT-150-BLK) and purchase information ready when contacting support.
You can visit the WilTec store on Amazon for more information: WilTec Amazon Store
