1. Introducció
Thank you for choosing the PERLESMITH Full Motion TV Wall Mount. This manual provides detailed instructions for safe and proper installation, operation, and maintenance of your new TV wall mount. Please read this manual thoroughly before installation to ensure correct setup and to maximize the performance and longevity of your product.
This full motion TV wall mount is designed to securely hold 26-65 inch flat or curved screen televisions weighing up to 99 lbs (45 kg). It features dual articulating arms, allowing for tilt, swivel, and extension adjustments to achieve optimal viewing angles from anywhere in your room.
2. Informació de seguretat
ADVERTIMENT: Si no llegiu i no seguiu totes les instruccions, advertències i precaucions d'aquest manual, podeu patir lesions personals greus, danys materials o la pèrdua de garantia.
- Do not install into drywall alone. This mount must be installed into wood studs, concrete, or brick walls.
- Assegureu-vos que la superfície de muntatge pugui suportar amb seguretat el pes combinat del suport i del televisor.
- No supereu la capacitat màxima de pes de 99 lliures (45 kg).
- Feu servir sempre un localitzador de muntants de fusta per localitzar-los amb precisió.
- Verify the VESA pattern and size of your TV are compatible with the mount before installation.
- Use caution when drilling. Avoid electrical wires and plumbing.
- Always use two people for lifting and positioning the TV.
- Mantingueu els nens i les mascotes allunyats durant la instal·lació.
3. Contingut del paquet
Please check to ensure all components are included and undamaged. If any parts are missing or defective, contact PERLESMITH customer service for assistance.
- Muntatge de la placa de paret
- Suports per a TV (2x)
- Kit de ferreteria de muntatge (diversos cargols, volanderes, separadors, ancoratges)
- Nivell de bombolla
- Cable Ties (5x)
- Manual d'instal·lació
4. Eines necessàries (no incloses)
- Cercador de muntants (per a la instal·lació de muntants de fusta)
- Llapis
- Trepant
- Drill Bits (specific sizes for wood studs or concrete/brick)
- Socket Wrench or Ratchet with appropriate socket size (for lag bolts)
- Tornavís Phillips
- Martell (per a ancoratges de formigó)
5. Configuració i instal·lació
5.1 Abans de començar
Before starting the installation, it is crucial to confirm your TV's compatibility and identify your wall type.
TV Compatibility Check:
- Patró VESA: Ensure your TV's VESA mounting holes are between 100x100mm and 400x400mm.
- Mida del televisor: This mount is suitable for TVs from 26 to 65 inches.
- Pes del televisor: Your TV must weigh no more than 99 lbs (45 kg).
Wall Type Identification:
This mount can be installed on wood stud walls (8"-16" spacing), concrete walls, or brick walls. DO NOT mount onto drywall alone.
5.2 Instal·lació pas a pas
Follow these steps carefully for a secure installation. It is recommended to have a second person assist you, especially when lifting the TV.
Step 1: Attach the TV Brackets to Your TV
- Col·loca amb cura el televisor cap per avall sobre una superfície suau i neta per evitar que es faci malbé la pantalla.
- Identify the correct diameter and length of screws for your TV's mounting holes. Use the provided hardware kit. You may need spacers if your TV back is uneven or has recessed holes.
- Attach the two vertical TV brackets to the back of your TV using the selected screws and washers. Ensure the brackets are centered and securely fastened. The hooks on the brackets should face upwards.
Pas 2: instal·leu la placa de paret
- Determine the desired height for your TV. Mark the center of where the TV will be mounted on the wall.
- Position the wall plate against the wall at the marked location. Use the included bubble level to ensure it is perfectly horizontal.
- Mark the drilling locations through the holes on the wall plate.
- Per a montants de fusta: Use a stud finder to locate the center of two adjacent wood studs (typically 16 inches apart). Drill pilot holes using the specified drill bit size (refer to manual for exact size). Secure the wall plate to the studs using the lag bolts and washers. Tighten firmly with a socket wrench.
- Per a parets de formigó/maó: Drill pilot holes using the specified masonry drill bit size. Insert concrete anchors into the drilled holes. Secure the wall plate using the lag bolts and washers, tightening firmly.
Pas 3: penja el televisor
- Amb l'ajuda d'una segona persona, aixequeu amb cura el televisor amb els suports adjunts.
- Enganxeu els suports del televisor a la placa de paret. Assegureu-vos que el televisor estigui ben fixat a la placa de paret.
- Locate the safety screws or locking mechanisms on the bottom of the TV brackets. Tighten these screws to secure the TV to the wall plate and prevent accidental dislodgement.
6. Instruccions de funcionament
Your PERLESMITH Full Motion TV Wall Mount allows for flexible adjustments to optimize your viewexperiència.
6.1 Ajust de la inclinació
The mount allows for a tilt range of +5° to -12° to reduce glare and find the perfect vertical viewangle de ing.
To adjust the tilt, loosen the tilt knobs or bolts on the TV brackets (if applicable), adjust the TV to the desired angle, and then re-tighten the knobs/bolts to secure the position.
6.2 Ajust del gir
The dual articulating arms allow for a horizontal swivel of up to ±45° (depending on TV size) to view from different seating positions.
Gently push or pull the TV to the desired swivel angle. The articulating arms will move smoothly. Ensure cables are not pinched or strained during adjustment.
6.3 Extensió i retracció
The mount can extend from a minimum of 3.2 inches (8.1 cm) from the wall to a maximum of 16.2 inches (41.1 cm).
To extend or retract the TV, gently pull or push the TV away from or towards the wall. The arms will articulate to allow movement.
7. Manteniment
Regular maintenance helps ensure the safe and proper functioning of your TV wall mount.
- Comproveu periòdicament les connexions: Every few months, check all screws and bolts to ensure they are securely tightened. Do not overtighten.
- Clean the Mount: Netegeu el suport amb un drap suau i sec per eliminar la pols. No utilitzeu productes de neteja abrasius ni dissolvents.
- Inspeccionar per danys: Regularly inspect the mount for any signs of wear, damage, or deformation. If any issues are found, discontinue use and contact customer support.
8. Solució De Problemes
If you encounter any issues during or after installation, refer to the table below for common problems and solutions.
| Problema | Causa possible | Solució |
|---|---|---|
| El televisor no està anivellat després de la instal·lació. | Wall plate not level; TV brackets not adjusted. | Use the built-in level adjustment feature (±3°) on the mount to fine-tune the TV's horizontal position. If the wall plate is significantly off, you may need to re-install. |
| La muntura sembla fluixa o inestable. | Lag bolts not fully tightened; incorrect wall type; TV weight exceeds capacity. | Ensure all lag bolts are securely tightened into studs or concrete. Verify wall type is suitable. Confirm TV weight is within the mount's capacity. |
| Cannot tilt or swivel the TV. | Tilt/swivel bolts are too tight; cables are obstructing movement. | Loosen the tilt adjustment bolts slightly. Check for any cables or obstructions preventing movement. |
| Falten peces del paquet. | Error d'embalatge. | Contact PERLESMITH customer service immediately for replacement parts. |
9. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | PSMFK4 |
| Mides de TV compatibles | 26 - 65 polzades |
| Capacitat de pes | Fins a 99 lliures (45 kg) |
| Compatibilitat VESA | 100x100mm a 400x400mm |
| Angle d'inclinació | +5° a -12° |
| Angle de gir | ±45° (max, depends on TV size) |
| Ajust de nivell | ±3° |
| Extensió des de la paret | de 8.1 cm (3.2 polzades) a 41.1 cm (16.2 polzades) |
| Material | Acer d'aliatge |
| Tipus de muntatge | Wall Mount (Wood Stud, Concrete, Brick) |
| UPC | 713721599509 |
10. Garantia i Suport
PERLESMITH is committed to providing high-quality products and reliable after-sales support. While specific warranty details may vary by region, we stand behind the quality of our products.
If you have any questions, require assistance with installation, or need to report a missing/defective part, please do not hesitate to contact our customer support team. For the quickest service, please have your model number (PSMFK4) and purchase information ready.
You can typically find contact information for PERLESMITH customer service on the product packaging, our official weblloc web o a través del venedor on vau comprar el producte.
