Introducció
This manual provides essential information for the proper setup, operation, and maintenance of your Smart UF70 DLP Projector. Please read this manual thoroughly before using the projector to ensure optimal performance and longevity.
Figure 1: Smart UF70 DLP Projector, showing its compact design and side ventilation.
Configuració
Desembalatge i inspecció
Carefully remove all components from the packaging. Verify that all items listed below are present and undamaged. If any items are missing or damaged, contact your dealer immediately.
- Smart UF70 Projector Unit
- Cable d'alimentació
- Control remot
- HDMI Cable (may vary by package)
Figure 2: Included accessories with the Smart UF70 Projector, typically including a remote control and necessary cables.
Col·locació
The Smart UF70 is an ultra-short throw projector, designed to project a large image from a very short distance. Place the projector on a stable, flat surface directly in front of the projection screen or wall. Ensure adequate ventilation around the projector.
Connexions
Connect your source devices (e.g., laptop, Blu-ray player) to the projector using the appropriate cables. The UF70 supports various input types.
- Potència: Connect the power cable to the projector's AC input and then to a wall outlet.
- HDMI: For high-definition video and audio, connect an HDMI cable from your source device to the HDMI port on the projector.
- VGA: For computer connections, use a VGA cable.
- Entrada/Sortida d'àudio: Use 3.5mm mini-jack cables for external audio devices.
- Xarxa (RJ-45): For network control or updates.
- USB tipus B: For control or service.
Figure 3: Rear panel of the Smart UF70 Projector, illustrating the array of connectivity options including HDMI, VGA, Audio, Network, and USB ports.
Instruccions de funcionament
Encès/Apagat
- Encès: Press the power button on the projector or the remote control. The power indicator light will change.
- Apagar: Press the power button again. A confirmation message may appear. Press again to confirm shutdown. Allow the projector to cool down before unplugging.
Selecció de la font d'entrada
Use the "Source" or "Input" button on the remote control or projector control panel to cycle through available input sources (HDMI, VGA, Composite, etc.).
Ajust del focus
The UF70 features a manual focus ring. Rotate the focus ring located near the lens until the projected image is sharp and clear.
Figura 4: superior view of the Smart UF70 Projector, highlighting the lens and focus adjustment mechanism.
Navegació pel menú
Use the menu button on the remote or projector to access settings. Navigate using arrow keys and confirm selections with the OK/Enter button. Adjust settings such as brightness, contrast, aspect ratio, and keystone correction.
Manteniment
Neteja del projector
- Exterior: Use a soft, dry cloth to wipe the projector's casing. Per a marques difícils, lleugerament dampen the cloth with water. Avoid abrasive cleaners.
- Lent: Gently clean the projector lens with a lens cleaning cloth or lens paper. Do not use liquid cleaners directly on the lens.
- Vendes d'aire: Reviseu i netegeu periòdicament les reixetes d'aire per garantir un flux d'aire adequat i evitar el sobreescalfament. Feu servir un raspall suau o aire comprimit.
Lamp Life and Replacement
The Smart UF70 uses a long-life DLP lamp. El joamp life can vary based on usage and mode. When the lamp reaches the end of its life, a warning message may appear, or the projector may not power on. Refer to the full service manual or contact authorized service personnel for lamp procediments de substitució.
Resolució de problemes
This section addresses common issues you might encounter. For more complex problems, consult the manufacturer's support resources.
| Problema | Causa possible | Solució |
|---|---|---|
| Projector does not turn on or "wrench" light stays on. | Power issue, overheating, or internal fault. |
|
| No es projecta cap imatge. | Incorrect input source, loose cable, or source device issue. |
|
| La imatge està borrosa o desenfocada. | Focus adjustment needed. | Ajusteu l'anell d'enfocament de la lent del projector fins que la imatge sigui nítida. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | Intel·ligent |
| Model | UF70 |
| Tecnologia de visualització | DLP |
| Brillantor | 3000 lúmens ANSI |
| Resolució nativa | 1024 x 768 (XGA) |
| Resolució suportada | Up to 1080i |
| Connectivitat | HDMI Standard, VGA/SVGA D-Sub, USB Type-B, Network: RJ-45, LAN, Composite: RCA, Audio In: Mini Jack, Audio Out: Mini Jack |
| Pes de l'article | 16.7 lliures |
| Dimensions del producte | 30 x 14 x 15 polzades |
| Característiques especials | Ultra Short Throw, Portable |
Garantia i Suport
For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Smart Technologies weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
Recursos en línia: For the most up-to-date drivers, firmware, and detailed troubleshooting guides, please visit the manufacturer's official support page.
