Producte acabatview
The Ematic EMW5105 is a low-profile fixed TV wall mount designed to securely hold TV screens ranging from 23" to 65". It supports a maximum weight of 77 lbs (35 kg) and is compatible with various VESA mounting standards, including 100x100, 200x100, 200x200, 300x300, 400x200, and 400x400. This mount features a super low-profile design for a sleek appearance and includes built-in safety locks for secure installation. It is UL Listed for quality and safety.
Image: The Ematic EMW5105 low profile fixed TV wall mount, showing its main components.
Image: Ematic logo and "EMW5105 FIXED PROFILE WALL MOUNT" text alongside an image of the wall mount.
Imatge: Primer pla view of the Ematic EMW5105 wall mount highlighting the built-in level for easy installation and safety locks to keep the display stable and secure.
Image: The Ematic EMW5105 wall mount with text describing its VESA mounting standards compatibility (100x100, 200x100, 200x200, 300x300, 400x200, 400x400) and support for TVs from 23" to 65" up to 77 lbs.
Informació de seguretat
WARNING STATEMENT AND DISCLAIMER:
- EMATIC WALL MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY EMATIC WALL MOUNTS FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS.
- THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING 300 LBS. IF NOT, THE WALL STRUCTURE MUST BE REINFORCED. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY, OR EVEN DEATH.
- PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD. THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE.
- SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE INSTALLATION OF THIS PRODUCT. USE PROPER SAFETY GEAR AND TOOLS FOR THE INSTALLATION PROCEDURE TO PREVENT PERSONAL INJURY.
- Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in damage to the flat panel display and/or damage to the mounting surface.
- Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct heat energy. Failure to do so may result in damage to the flat panel display and could increase the risk of fire.
- At least two qualified people should perform the installation procedure. Injury and/or damage can result from dropping or mishandling the flat panel display.
Contingut del paquet
Please verify that all parts are included and undamaged before proceeding with assembly. If any parts are missing or damaged, contact Ematic support for a replacement.
TV Requirements:
- Max Weight: 77 lbs (35 KG)
- Screen Size: 23"-65"
- VESA: Up to 400x400
Components inclosos:
- Suports per a TV (x2)
- Placa de paret (x1)
- M4x12mm Screws (A) (x4)
- M5x12mm Screws (B) (x4)
- M6x12mm Screws (C) (x4)
- M8x15mm Screws (D) (x4)
- M6 Plastic Anchor (E) (x4)
- M6 Screws (F) (x4)
- Washer (G1) (x6)
- Bubble Level (G2) (x1)
- Bracket Stabilizer (H) (x2)
Eines necessàries (no incloses):
- Marcador
- Tornavís
- Trepant elèctric
- Cinta mètrica
Guia d'instal·lació
This section provides detailed instructions for mounting your Ematic EMW5105 TV Wall Mount. Please follow the steps carefully for a secure installation.
Video Installation Guide:
Video: Official installation guide for Ematic EMW5005 and EMW5105 TV Wall Mounts. This video demonstrates the step-by-step process for both concrete and wood stud mounting, attaching the TV brackets, and securing the TV.
Pas 1A: Muntatge a la paret de formigó
- Place the wall plate at the desired height on the concrete wall. Use it as a template to mark the hole locations.
- Drill the marked holes to at least 40mm in depth. Ensure you do not drill into mortar joints.
- Secure the TV mount to the wall using the concrete anchors (E), washers (G1), and screws (F) combination.
Step 1B: Wood Stud Mounting
- Use a stud finder to locate the edges of the studs. Mark the center of each stud by drawing a vertical line with a pencil.
- Place the wall mount at a desired height, aligning it with the marked stud centers. Use the base of the mount as a template to mark the hole locations.
- Drill the holes to at least 50mm in depth.
- Secure the wall mount to the wall using the washers (G1) and screws (F) combination. Use a level (G2) to ensure the mount is straight vertically.
Pas 2: connecteu el suport al televisor
Determine which screw diameter to use by hand threading screws into the proper inserts on the back of your television. Verify that the screw is a good fit, not too short or too long.
- For TVs compatible with screws A, B, or C, and washer G1: Place the TV Bracket over your television hole pattern. Attach using the appropriate screw (A, B, or C) and washer (G1) combination for your TV. Also attach Bracket Stabilizer (H).
- For TVs compatible with screws D: Place the TV Bracket over your television hole pattern. Attach using the appropriate screw (D) and Bracket Stabilizer (H) for your TV.
Step 3: Lock Television onto Wall Plate
- Lock your television into place by attaching the TV brackets to the wall mount.
- Secure your wall plate by locking the bracket latches into place.
Especificacions
| Característica | Detall |
|---|---|
| Dimensions del producte | 1.3 x 18 x 3.2 polzades |
| Pes de l'article | 2.5 lliures |
| Marca | Emàtica |
| Tipus de muntatge | Muntatge de paret |
| Tipus de moviment | Arreglat |
| Material | Acer d'aliatge |
| Mida màxima compatible | 65 polzades |
| Mida mínima compatible | 23 polzades |
| Dispositius compatibles | Televisió |
| Compatibilitat VESA | 100x100, 200x100, 200x200, 300x300, 400x200, 400x400 |
| Capacitat de càrrega màxima | 77 lliures |
Resolució de problemes
If you encounter any issues during installation or use, please refer to the following common troubleshooting tips:
- La muntura no està anivellada: Ensure the wall plate is level before securing it. Use the included bubble level (G2) or a separate level tool. Adjust as necessary before tightening all screws.
- El televisor no s'adapta al suport: Verify your TV's screen size (23"-65") and VESA mounting pattern (100x100, 200x100, 200x200, 300x300, 400x200, 400x400) are compatible with the EMW5105 mount.
- Peces que falten o danyades: Refer to the "Package Contents" section. If any parts are missing or damaged, contact Ematic customer support for assistance.
- Dificultat per fixar el televisor a la placa de paret: Ensure the TV brackets are correctly attached to the TV and aligned with the wall plate. The safety latches should click into place to secure the TV.
- Wall mount feels unstable: Double-check that all screws are securely tightened and that the mount is installed into appropriate studs (for wood) or concrete with proper anchors. The wall structure must be capable of supporting the TV's weight.
Garantia i Suport
For customer support regarding your Ematic EMW5105 TV Wall Mount, please visit the official Ematic support weblloc.
Weblloc: ematic.us/support
Contact Ematic Support with any questions or concerns.
