ECCO ED0016R Directional LED Magnetic Mount Light User Manual

1. Introducció

1.1 Producte acabatview

The ECCO ED0016R is a directional LED light designed for various warning and safety applications. It features 18 red LEDs, a magnetic mounting base for easy attachment to ferrous surfaces, and is powered by four AA batteries. Its compact and durable design makes it suitable for temporary or portable use.

Image of the ECCO ED0016R Directional LED Magnetic Mount Light, showcasing its red LEDs and magnetic base.

1.2 Ús previst

This device is intended for use as a temporary warning or directional light in industrial, commercial, or personal safety environments. It is designed to provide high visibility to alert others to potential hazards or direct traffic flow. It is not intended for permanent installation or as a primary safety device without additional safety measures.

1.3 Contingut del paquet

• 1 x ECCO ED0016R Directional LED Magnetic Mount Light

Nota: Es necessiten 4 piles AA per al funcionament i no estan incloses en el paquet.

2. Informació important de seguretat

Please read and understand all safety instructions before operating this product. Failure to follow these instructions may result in injury or damage to the product.

• Mantingueu el dispositiu lluny dels nens.
• No desmunteu, modifiqueu ni intenteu reparar el dispositiu. Això anul·larà la garantia i pot causar danys o lesions.
• Ensure the magnetic mount is securely attached to a clean, flat, ferrous surface before operation. Verify stability to prevent the light from falling.
• No exposeu el dispositiu a temperatures extremes, a la llum solar directa durant períodes prolongats ni a una humitat excessiva.
• Use only the specified battery type (AA).
• Insert batteries with correct polarity (+/-) as indicated inside the battery compartment.
• No barregeu piles velles i noves, o diferents tipus de piles.
• Remove depleted batteries promptly to prevent leakage and damage.
• Eliminar les bateries segons la normativa local.

2.1 Advertència de la Proposició 65 de Califòrnia

ADVERTIMENT: Aquest producte us pot exposar a substàncies químiques que l'estat de Califòrnia sap que causen càncer i defectes de naixement o altres danys reproductius. Per a més informació aneu a www.P65Warnings.ca.gov.

3. Configuració

3.1 Instal·lació de la bateria

1. Localitzeu la tapa del compartiment de la bateria al dispositiu.
2. Open the cover by sliding or unscrewing it, as applicable.
3. Insert four (4) AA batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
4. Tanqueu de manera segura la tapa del compartiment de la bateria.

3.2 Muntatge de la llum

The ECCO ED0016R features a magnetic base for easy attachment.

1. Ensure the desired mounting surface is clean, dry, and made of a ferrous material (e.g., steel).
2. Place the magnetic base of the light firmly onto the surface.
3. Verify that the light is securely attached and will not dislodge due to vibrations or movement.

4. Funcionament

4.1 Engegada/apagada

Per fer funcionar la llum:

• Localitzeu el botó d'engegada del dispositiu.
• Press the power button once to turn the light ON.
• Press the power button again to turn the light OFF.

5. Manteniment

5.1 Substitució de la bateria

When the light dims or ceases to function, it is time to replace the batteries. Follow the steps outlined in Section 3.1 Battery Installation to replace the four AA batteries.

5.2 Neteja

Per netejar el dispositiu:

• Ensure the device is turned off and batteries are removed if performing a thorough cleaning.
• Netegeu les superfícies exteriors amb un damp tela.
• No utilitzeu netejadors abrasius, dissolvents ni productes químics agressius, ja que poden danyar l'acabat o els components interns.
• Ensure the device is completely dry before reinstalling batteries or operating.

6. Solució De Problemes

If you encounter issues with your ECCO ED0016R light, refer to the following troubleshooting guide:

• La llum no s'encén:
  • Check if batteries are installed correctly with the proper polarity.
  • Ensure batteries are not depleted. Replace with new AA batteries if necessary.
  • Verifiqueu que la tapa del compartiment de la bateria estigui ben tancada.
• La llum és tènue o parpelleja:
  • Batteries may be low. Replace all four AA batteries with new ones.
• Light does not stay mounted:
  • Ensure the mounting surface is clean, dry, and free of debris.
  • Verify the surface is made of a ferrous material suitable for magnetic attachment.
  • The surface may be too thin or have insufficient ferrous content. Try a different mounting location.

7. Especificacions

8. Garantia i Suport

For warranty information, technical support, or service inquiries regarding your ECCO ED0016R Directional LED Magnetic Mount Light, please contact ECCO customer service directly. Refer to the official ECCO weblloc web o l'embalatge del producte per obtenir la informació de contacte més actualitzada.

Please have your model number (ED0016R) and purchase details available when contacting support.