Introducció
This manual provides essential instructions for the setup, operation, and maintenance of your Diesel Mr. Daddy 2.0 57MM Chronograph Watch. Please read this guide thoroughly to ensure proper use and longevity of your timepiece.
Davant view of the Diesel Mr. Daddy 2.0 57MM Chronograph Watch, showcasing the oversized dial and multiple subdials.
Configuració
1. Unboxing
Your Diesel Mr. Daddy 2.0 watch comes securely packaged in a distinctive red box. Carefully remove the watch and any protective films.
The red packaging box for your Diesel watch.
2. Configuració de l'hora i la data
To set the main time, pull out the crown (the large knob on the side) to the outermost position. Rotate the crown to adjust the hour and minute hands. Push the crown back in to start the watch. For the date, pull the crown out to the first position and rotate it to set the correct date. Push it back in once set.
3. Ajust de la corretja
The watch features an adjustable buckle closure. Thread the silicone band through the buckle and secure it to a comfortable fit on your wrist. Ensure it is snug but not overly tight.
The Diesel Mr. Daddy 2.0 watch displayed on a wrist, showing its size and fit.
Funcionament del rellotge
1. Visualització del temps
The watch features an analog display for the main time. The oversized dial includes multiple time zones, which can be set independently using the additional crowns/pushers.
2. Chronograph Function
Your watch is equipped with a chronograph, or stopwatch, function. It has three subdials to track minutes, seconds, and 24-hour time. Use the pushers located above and below the main crown to operate the chronograph:
- Inici/Parada: Premeu el polsador superior per iniciar i aturar el cronògraf.
- Restablir: With the chronograph stopped, press the bottom pusher to reset all chronograph hands to zero.
3. Date Window
A date window is integrated into the main dial, displaying the current day of the month.
lateral view of the watch, highlighting the main crown and chronograph pushers.
Manteniment
1. Resistència a l'aigua
This watch is water resistant up to 30 meters (100 feet) or 3 ATM. This means it will withstand splashes of water or brief immersion. It is no adequat per nedar, dutxar-se o bussejar.
2. Substitució de la bateria
The watch uses one LR44 battery, which is included. When the watch stops running or the hands become sluggish, it is likely time for a battery replacement. It is recommended to have the battery replaced by a professional jeweler to ensure proper sealing and maintain water resistance.
3. Neteja
Per netejar el rellotge, netegeu la caixa i la corretja amb un drap suau i sec.amp drap. Eviteu utilitzar productes químics agressius o materials abrasius, que poden danyar l'acabat.
Resolució de problemes
Watch Not Running
If the watch is not running, ensure the crown is fully pushed in. If it still does not run, the battery may need replacement. Refer to the 'Battery Replacement' section.
Hora incorrecta
If the time is incorrect, follow the steps in the 'Setting the Time and Date' section to reset it.
Chronograph Not Resetting to Zero
If the chronograph hands do not reset to zero, consult a professional watch repair service for adjustment.
Especificacions
| Número de model | DZ7419 |
| Diàmetre de la caixa | 57 MM |
| Amplada de banda | 28 MM |
| Moviment | Cronògraf de quars |
| Resistència a l'aigua | 3 ATM (30 metres / 100 peus) |
| Tipus de bateria | 1 x LR44 (inclosa) |
| Dimensions del producte | 2.24 x 1.1 x 0.55 polzades |
| Pes de l'article | 5.15 unces |
Visual comparison of various watch sizes, including the 57MM size of this model.
Garantia i Suport
Your Diesel Mr. Daddy 2.0 watch is manufactured by Diesel. For specific warranty information, including coverage details and duration, please refer to the warranty card included with your purchase or visit the official Diesel website. For technical support or service inquiries, please contact Diesel customer service directly.
