Manual d'usuari del potenciòmetre de cermet BOURNS 3852A-162-501A

1. Introducció

This manual provides essential information for the proper installation, operation, and maintenance of your BOURNS 3852A-162-501A Cermet Potentiometer. Please read these instructions carefully before use to ensure optimal performance and longevity of the device.

The BOURNS 3852A-162-501A is a single-turn cermet potentiometer designed for panel mounting, offering a resistance of 500 Ohms with a 10% tolerance and a 2-watt power rating. Its robust construction makes it suitable for various industrial and electronic applications requiring precise resistance adjustment.

2. Producte acabatview

BOURNS 3852A-162-501A Cermet Potentiometer with solder lugs and threaded shaft

Figure 1: BOURNS 3852A-162-501A Cermet Potentiometer. This image shows the potentiometer with its three solder lugs for electrical connection and the threaded shaft for panel mounting and adjustment.

3. Configuració i instal·lació

3.1 Precaucions de seguretat

Ensure all power is disconnected before installation or wiring.
Utilitzeu l'equip de protecció individual (EPI) adequat, com ara ulleres de seguretat.
Handle with care to avoid damaging the terminals or the internal mechanism.

3.2 Instruccions de muntatge

Prepare a suitable panel opening for the potentiometer's threaded shaft (6.35mm diameter).
Insert the potentiometer shaft through the panel opening.
Secure the potentiometer to the panel using the provided nut and washer. Tighten firmly but do not overtighten.

3.3 Connexions elèctriques

The potentiometer features solder lugs for electrical connections. Refer to your circuit diagram for specific wiring. A typical connection involves:

Terminal 1 (End Terminal): Connect to one end of the voltage source or signal.
Terminal 2 (Wiper Terminal): Connect to the output or variable resistance point.
Terminal 3 (End Terminal): Connect to the other end of the voltage source or ground.

Ensure clean, secure solder joints to prevent intermittent connections or resistance fluctuations.

4. Instruccions de funcionament

The BOURNS 3852A-162-501A is a single-turn potentiometer, meaning its full resistance range is covered within one complete rotation of the shaft.

Ajust: Rotate the shaft clockwise or counter-clockwise to adjust the resistance value.
Interval de resistència: The resistance will vary from approximately 0 Ohms to 500 Ohms as the shaft is rotated from one extreme to the other.
Seguiment: Use a multimeter or appropriate measurement device to verify the desired resistance or voltage output during adjustment.

Nota: Avoid forcing the shaft beyond its mechanical stops, as this can cause internal damage to the potentiometer.

5. Manteniment

The BOURNS 3852A-162-501A Cermet Potentiometer is designed for long-term reliability with minimal maintenance. However, adhering to these guidelines can extend its lifespan:

Neteja: Keep the potentiometer free from dust, dirt, and moisture. Use a soft, dry cloth for external cleaning. Avoid using solvents or abrasive cleaners.
Condicions ambientals: Operate and store the potentiometer within its specified temperature and humidity ranges to prevent degradation.
Inspecció: Periodically inspect solder connections for integrity and ensure the mounting nut remains secure.

6. Solució De Problemes

If you encounter issues with your potentiometer, consider the following common troubleshooting steps:

Problema	Causa possible	Solució
No resistance change / Open circuit	Broken internal element Poor solder connection Damaged terminal	Check continuity with a multimeter. Re-solder connections. Replace the potentiometer if internal damage is suspected.
Intermittent resistance / Noise	Dirty or worn wiper track Connexions soltes	Ensure clean operating environment. Comproveu i fixeu totes les connexions elèctriques. Consider replacement if wear is significant.
Resistance value out of specification	Incorrect part used Potentiometer damage	Verify the model number and specifications. Substituïu el potenciòmetre.

7. Especificacions

Característica	Detall
Número de model	3852A-162-501A
Tipus	Cermet Potentiometer
Resistència nominal	500 ohms
Tolerància a la resistència	±10%
Potència nominal	2 watts
Girs (elèctrics/mecànics)	1 Turn / 1 Turn
Diàmetre de l'eix	6.35 mm
Dimensions (L x A x A)	19.05 x 19.05 x 23.55mm (approximate body dimensions)
Tipus de muntatge	Solder Lug Panel Mount
Fabricant	Bourns

8. Informació de la garantia

BOURNS products are manufactured to high-quality standards. This potentiometer is covered by the standard manufacturer's warranty against defects in materials and workmanship under normal use. The warranty period typically begins from the date of purchase. Please refer to the official BOURNS website or contact their customer service for detailed warranty terms and conditions specific to the 3852A-162-501A model.

Damage resulting from improper installation, misuse, unauthorized modification, or operation outside of specified environmental limits is not covered by the warranty.

9. Atenció al client

For technical assistance, product inquiries, or warranty claims, please contact BOURNS customer support:

Weblloc: Visit the official BOURNS website for product datasheets, application notes, and contact information.
Formulari de contacte: Use the contact form available on their website for specific inquiries.
Distribuïdor: Contact your authorized BOURNS distributor for local support.

When contacting support, please have your product model number (3852A-162-501A) and purchase details readily available.

	Fitxa tècnica del potenciòmetre de regulació de trimpot Bourns 3059 Especificacions detallades i dimensions del producte per al potenciòmetre de regulació de potència Bourns 3059, incloent-hi les característiques elèctriques, ambientals i físiques, i informació de comanda.
	Fitxa tècnica del control de panell segellat quadrat de 9 mm de la sèrie Bourns 3310 Fitxa tècnica detallada del control de panell segellat quadrat de 9 mm de la sèrie 3310 de Bourns, que inclou les especificacions elèctriques, ambientals i mecàniques, les dimensions i la informació de comanda.
	Fitxa tècnica del potenciòmetre rotatiu de 12 mm de la sèrie PDB12 de Bourns Fitxa tècnica del potenciòmetre rotatiu de 12 mm de la sèrie PDB12 de Bourns, que detalla les característiques elèctriques, ambientals i mecàniques, les dimensions del producte i la informació de comanda.
	Fitxa tècnica del potenciòmetre de corredissa d'alta qualitat Bourns sèrie PTS (obsoleta) Technical datasheet for the Bourns PTS Series High Grade Slide Potentiometer. This series is obsolete and not recommended for new designs. It details electrical, environmental, and mechanical characteristics, product dimensions, ordering information, and taper characteristics for single and dual gang configurations.
	Potenciòmetres de retall de cermet de forat passant segellat de Bourns Exploreu la gamma completa de potenciòmetres de retallament de cermet segellats per a forats passants de Bourns, que ofereixen una alta fiabilitat i diverses aplicacions en els mercats aeroespacial, de les comunicacions, industrial i mèdic. Descobriu especificacions detallades, informació del model i contactes de vendes globals.
	Fitxa tècnica de les resistències bobinades de precisió Bourns sèrie SM8 i SM10 Fitxa tècnica detallada de les resistències bobinades de precisió Bourns de les sèries SM8 i SM10, anteriorment productes Riedon™. Inclou característiques, especificacions, dimensions, corbes de reducció de potència, informació de comanda i dades de contacte.

BOURNS 3852A-162-501A