1. Introducció
The Renogy Wanderer PG 10A PWM Solar Charge Controller is designed to regulate the power flow from your solar panels to your battery bank, ensuring efficient and safe charging. This controller is suitable for 12V and 24V solar systems and is compatible with various battery types, including Sealed, Gel, Flooded, and Lithium batteries. It features a compact design, an LCD display for real-time monitoring, and multiple electronic protections to safeguard your system.
2. Informació de seguretat
Please read all instructions and warnings in this manual before installation and operation. Failure to follow these instructions may result in electric shock, fire, or severe injury.
- Ensure all wiring is securely connected and properly insulated.
- Do not disassemble or attempt to repair the controller. Contact Renogy support for assistance.
- Install the controller in a well-ventilated area, away from flammable materials and corrosive gases.
- Wear appropriate personal protective equipment, including eye protection, when working with batteries and solar panels.
- Assegureu-vos que la bateria voltage coincideix amb el sistema voltage (12V or 24V) before connecting.
- Connecteu sempre primer la bateria al controlador de càrrega, després al panell solar i finalment a la càrrega. Desconnecteu-ho en ordre invers.
3. Característiques del producte
- Smart 4-Stage Càrrega: Utilizes Bulk, Boost, Float, and Equalization charging stages to optimize power delivery and extend battery lifespan for AGM, Gel, Flooded, and Lithium batteries.
- Comprehensive System Protection: Includes protections against overcharge, over-discharge, overload, short-circuit, reverse polarity, and reverse current. LCD error codes provide diagnostic information.
- Ports USB integrats: Features built-in 5V 2A USB ports for direct charging of phones and tablets.
- Advanced Load Control Modes: Customizable load modes for efficient energy management in 12V/24V systems.
- Monitorització en temps real: The LCD screen displays charging parameters and error codes. Optional RS232 port allows connection to a BT-1 Bluetooth module (sold separately) for monitoring via the DC Home app.
Image: The Renogy Wanderer PG 10A Solar Charge Controller supports a 4-stage charging process for optimal battery health.
Image: The controller includes multiple electronic protections to prevent system damage.
4. Configuració i instal·lació
4.1 Muntatge del controlador
Mount the Wanderer PG controller vertically on a flat, non-flammable surface in a well-ventilated indoor area. Ensure there is adequate clearance around the controller for heat dissipation. Avoid direct sunlight, high temperatures, and water exposure.
4.2 Connexions de cablejat
Follow the wiring sequence carefully to prevent damage to the controller or other components. The recommended wire gauge for the 10A model is 10-12 AWG.
- Connecteu la bateria: Connect the positive and negative terminals of the battery to the corresponding battery terminals on the charge controller. The LCD will illuminate if the connection is successful.
- Connecteu el panell solar: Connect the positive and negative terminals of the solar panel to the corresponding solar panel terminals on the charge controller.
- Connecteu la càrrega (opcional): Connect the positive and negative terminals of your DC load to the corresponding load terminals on the charge controller.
Seqüència de desconnexió: To disconnect the system, follow the reverse order: Load > Solar Panel > Battery.
Image: A typical setup diagram illustrating the connection order for the solar panel, charge controller, battery, and optional inverter.
5. Instruccions de funcionament
Pantalla LCD i botons 5.1
The controller features an LCD screen that displays system parameters and status. The 'SELECT' and 'ENTER' buttons are used for navigation and setting adjustments.
- Botó SELECCIÓ: Press to cycle through display screens (e.g., battery voltage, charging current, load status). Hold to enter the setting menu.
- Botó ENTER: Press to confirm selections or change values within the setting menu.
Image: The controller's LCD screen and control buttons for easy operation.
5.2 Selecció del tipus de bateria
The controller supports different battery types. It is crucial to select the correct battery type for optimal charging and battery longevity.
- Hold the 'SELECT' button to enter the setting menu.
- Navigate to the battery type setting using 'SELECT'.
- Press 'ENTER' to modify, then use 'SELECT' to choose between Sealed (SLD), Gel (GEL), Flooded (FLD), or Lithium (LiFePO4).
- Press 'ENTER' to confirm your selection.
Image: The controller is compatible with multiple battery types, including AGM, Gel, Flooded, and Lithium.
5.3 Modes de control de càrrega
The controller offers various load control modes to manage the connected DC load. These modes can be configured through the setting menu.
5.4 ports de càrrega USB
The two 5V 2A USB ports can be used to charge small electronic devices. These ports are active when the load output is enabled.
5.5 Monitorització remota (opcional)
For enhanced monitoring capabilities, connect a Renogy BT-1 Bluetooth module (sold separately) to the RS232 port. This allows you to monitor system data and adjust settings via the Renogy DC Home app on your smartphone or tablet.
Image: Wireless monitoring of the PV system is possible with the optional BT-1 Bluetooth module and the Renogy DC Home app.
6. Manteniment
Un manteniment regular garanteix un rendiment òptim i una llarga vida útil del controlador de càrrega solar.
- Inspeccionar connexions: Comproveu periòdicament totes les connexions del cablejat per verificar si estan ben ajustades i si hi ha corrosió.
- Clean the Controller: Mantingueu el controlador net i lliure de pols i brutícia. Feu servir un drap sec per netejar-lo.
- Comproveu si hi ha danys: Inspect the controller for any physical damage or signs of overheating.
- Inspecció de la bateria: Regularly check your battery bank for proper electrolyte levels (for flooded batteries) and overall condition.
7. Solució De Problemes
If you encounter issues with your Renogy Wanderer PG controller, refer to the table below for common problems and solutions. The LCD display may show error codes to assist in diagnosis.
| Problema | Causa possible | Solució |
|---|---|---|
| Sense pantalla a la pantalla LCD | Bateria no connectada o de baix volumtage | Check battery connections; ensure battery voltage supera els 8V. |
| Sense càrrega des del panell solar | Solar panel not connected, low sunlight, or reverse polarity | Check solar panel connections and polarity; ensure adequate sunlight. |
| La càrrega no funciona | Load disconnected, overload, or battery low voltage | Check load connections; reduce load; charge battery. |
| Error Code displayed | System fault (e.g., over-voltage, short-circuit) | Refer to the full product manual for specific error code definitions and troubleshooting steps. |
8. Especificacions
| Paràmetre | Valor |
|---|---|
| Model | Vagabund 10 Amp 12V/24V |
| Corrent de càrrega nominal | 10A |
| Volum del sistematage | Reconeixement automàtic de 12V / 24V |
| Tipus de bateries | Sealed, Gel, Flooded, Lithium |
| Sortida USB | 5V 2A (Dual USB) |
| Tipus de visualització | LCD |
| Consum inactiu | <0.8W |
| Dimensions del producte | 4.7 x 3 x 1.1 polzades (119 x 75 x 27.5 mm) |
| Pes de l'article | 4.3 unces (122 g) |
| Material de l'habitatge | Rugged Aluminum |
9. Garantia i Suport
Renogy products are designed for reliability and performance. For specific warranty details regarding your Wanderer PG 10A Solar Charge Controller, please refer to the official Renogy weblloc web o la targeta de garantia inclosa amb el producte.
For technical assistance, troubleshooting, or product inquiries, please contact Renogy Customer Support. Renogy offers professional technical guidance and prompt responses to ensure customer satisfaction.
- Assistència en línia: Visit the Renogy official weblloc web amb preguntes freqüents, documents de suport i informació de contacte.
- Email/Phone Support: Contact details are available on the Renogy weblloc.
