RYOBI P739 1 GAL. 120 PSI Portable 18V ONE+ Horizontal Air Compressor

Introducció

Thank you for choosing the RYOBI P739 1 Gallon 120 PSI Portable 18V ONE+ Horizontal Air Compressor. This versatile and compact air compressor is designed for a variety of inflation tasks, from vehicle tires to recreational inflatables, and can also power small pneumatic tools. Its cordless design, powered by the RYOBI ONE+ 18V battery system, offers exceptional portability and convenience for both indoor and outdoor projects.

Figura 1: global view of the RYOBI P739 Air Compressor.

Informació de seguretat

Always read and understand the entire instruction manual before operating the air compressor. Failure to follow all instructions may result in electric shock, fire, and/or serious injury. Keep this manual for future reference.

• Protecció ocular: Always wear ANSI Z87.1 compliant eye protection with side shields when operating or performing maintenance on the compressor.
• Protecció auditiva: Utilitzeu protecció auditiva durant el funcionament per evitar danys auditius.
• Ventilació: Operate the compressor in a well-ventilated area. Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Seguretat elèctrica: Assegureu-vos que la font d'alimentació coincideixi amb el voltage requirements of the compressor. Avoid using extension cords if possible; if necessary, use only appropriate gauge and length.
• Alleujament de la pressió: Never exceed the maximum pressure rating of any tool or accessory. Always relieve air pressure from the tank before servicing or storing the compressor.
• Drenatge del dipòsit: Regularly drain moisture from the air tank to prevent corrosion and ensure safe operation.
• Infants i espectadors: Mantenir els nens i els espectadors allunyats de la zona d'operacions.

Contingut del paquet

The RYOBI P739 Air Compressor package includes:

• RYOBI P739 1 Gallon 120 PSI Portable 18V ONE+ Horizontal Air Compressor
• Manual del propietari
• Inflation Accessories (various nozzles and needles)

Nota: La bateria i el carregador es venen per separat.

Especificacions

Figure 2: Product dimensions of the RYOBI P739 Air Compressor.

Configuració

1. Instal·la la bateria: Ensure your RYOBI ONE+ 18V battery is fully charged. Slide the battery into the battery port on the compressor until it clicks securely into place.


Figure 3: Inserting the 18V ONE+ battery into the compressor.

2. Connectar la mànega d'aire: The compressor features both high-pressure and low-pressure inflation/deflation ports. For high-pressure tasks like tires, connect the appropriate chuck to the high-pressure outlet. For low-pressure tasks like inflatables, attach the large diameter hose to the low-pressure port.


Figure 4: Labeled components including high-pressure and low-pressure ports.

3. Encès: Premeu el botó d'engegada del tauler de control per engegar el compressor. La pantalla digital s'il·luminarà.

Instruccions de funcionament

Funcionament general

The control panel features a digital display, mode selection, and +/- buttons for adjusting pressure settings. The compressor has an automatic shut-off feature once the set pressure is reached.

High-Pressure Inflation (Tires)

1. Estableix la pressió desitjada: Use the +/- buttons on the control panel to set the target PSI (Pounds per Square Inch) for your tire. Refer to your vehicle's owner's manual or tire sidewall for recommended pressure.
2. Connect Chuck: Securely attach the high-pressure chuck to the tire valve stem. Ensure a tight seal to prevent air leakage.
3. Inici de la inflació: Press the START/STOP button to begin inflation. The compressor will automatically stop once the preset PSI is reached.
4. Desconnectar: Once inflation is complete, disconnect the chuck from the valve stem.

Figure 5: Inflating a car tire using the high-pressure hose.

Low-Pressure Inflation/Deflation (Inflatables)

1. Attach Large Hose: Connect the large diameter hose to the low-pressure inflation/deflation port. Select the appropriate nozzle for your inflatable item.
2. Inflar/desinflar: For inflation, connect the hose to the item and press the START/STOP button. For deflation, connect the hose to the item and select the deflation mode (if available, or reverse the hose connection if applicable to the specific model).
3. Monitor: Monitor the inflation/deflation process visually. This mode does not have an automatic shut-off based on pressure.

Manteniment

• Drenar el dipòsit d'aire: Regularly drain moisture from the air tank using the 1/4 turn tank drain valve located at the bottom of the tank. This prevents rust and extends the life of the compressor.
• Filtre d'aire net: Periodically inspect and clean the air filter to ensure optimal performance. Refer to the manual for specific cleaning instructions.
• Emmagatzema correctament: Store the compressor in a clean, dry area away from extreme temperatures. Disconnect the battery when not in use for extended periods.

Resolució de problemes

Garantia i Suport

Per obtenir informació sobre la garantia, assistència tècnica o per demanar peces de recanvi, consulteu la targeta de garantia inclosa amb el producte o visiteu el lloc web oficial de RYOBI. weblloc web. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.