Manual d'usuari de la caixa Antec Dark Avenger DA601 E-ATX de torre mitjana

1. Introducció

1.1 About Your Antec DA601 Case

The Antec Dark Avenger DA601 is an E-ATX mid-tower PC case designed for high-performance gaming systems. It features an ARGB front panel with integrated LED strips, a tempered glass side panel for showcasing internal components, and includes a Prizm 120 ARGB fan for enhanced cooling and aesthetics. This manual provides comprehensive instructions for the assembly, operation, and maintenance of your DA601 case, ensuring optimal performance and longevity.

2. Producte acabatview

2.1 Característiques clau

• ARGB Front Panel: Features 4 LED strips on the front panel, easily controlled by a single button or motherboard synchronization.
• Pre-Installed ARGB Fan: Includes one Prizm 120 ARGB fan for improved thermal performance and customizable lighting.
• Pantalla completa View: A crystal-clear tempered glass side panel allows for a complete view of your internal PC components.
• High Water-Cooling Capability: Dissenyat amb ample space to support both All-In-One (AIO) and custom liquid cooling configurations.
• Inbuilt LED Controller: Connects to a 3-pin header on the motherboard for 16.8 million custom color options and synchronization.

2.2 Component Layout and Compatibility

Familiarize yourself with the internal layout and component compatibility of the Antec DA601 case before beginning assembly.

Figura 2.1: Frontal esquerre view of the Antec Dark Avenger DA601 E-ATX Mid Tower Case, showcasing the ARGB front panel and tempered glass side panel.

Figura 2.2: Part superior frontal view of the Antec Dark Avenger DA601 E-ATX Mid Tower Case, highlighting the top ventilation and front panel I/O ports.

Figure 2.3: Diagram illustrating the internal component layout and compatibility of the Antec DA601 case, including motherboard, GPU, CPU cooler, PSU, and storage drive locations.

3. Instruccions de configuració

Follow these steps to assemble your PC components within the Antec DA601 case.

3.1 Preparació del cas

1. Col·loqueu la caixa sobre una superfície plana i estable.
2. Carefully remove the tempered glass side panel by unscrewing the thumb screws and gently pulling it away. Set it aside on a soft, protected surface.
3. Traieu el panell lateral metàl·lic oposat per accedir a la zona de gestió de cables.

3.2 Instal·lació de la placa base

1. Install the necessary motherboard standoffs into the motherboard tray according to your motherboard's form factor (E-ATX, ATX, Micro-ATX, ITX).
2. Place the I/O shield into the rear opening of the case.
3. Carefully align your motherboard with the standoffs and I/O shield, then secure it with screws.

3.3 Instal·lació de la unitat d'alimentació (PSU).

1. Mount your PSU into the designated bay at the bottom rear of the case.
2. Fixeu la font d'alimentació amb els cargols de la part posterior de la carcassa.

3.4 Instal·lació de la unitat d'emmagatzematge

• SSD de 2.5 polzades: Mount SSDs onto the dedicated SSD trays located behind the motherboard tray. Secure them with screws.
• Discs durs de 3.5 polzades: Install HDDs into the removable drive cages located in the PSU shroud area. Slide them into place and secure with screws or tool-less mechanisms if available.

3.5 Graphics Card and Expansion Card Installation

1. Traieu les cobertes de les ranures PCIe necessàries de la part posterior de la carcassa.
2. Insert your graphics card or other expansion cards into the appropriate PCIe slots on your motherboard.
3. Fixeu les targetes amb cargols.

3.6 Gestió de cables

Utilize the cable routing grommets and tie-down points behind the motherboard tray to organize and secure cables. This improves airflow and aesthetics.

3.7 Connexió d'E/S del panell frontal

Connect the front panel cables (USB, audio, power switch, reset switch, power LED, HDD LED, ARGB headers) to their corresponding pins on your motherboard. Refer to your motherboard manual for exact pin locations.

4. Instruccions de funcionament

4.1 Encès

After all components are installed and cables are connected, ensure the PSU switch is in the 'ON' position. Press the power button on the top panel of the case to start your system.

4.2 Control d'il·luminació ARGB

The Antec DA601 features addressable RGB (ARGB) lighting on the front panel and includes an ARGB fan. You can control these lights in two ways:

• Botó del panell frontal: Press the dedicated LED control button on the top panel of the case to cycle through various lighting modes and colors.
• Sincronització de la placa base: If your motherboard supports ARGB (5V 3-pin header), connect the case's ARGB cable to the motherboard. You can then control the lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).

5. Manteniment

Un manteniment regular ajuda a garantir un rendiment òptim i allarga la vida útil dels components del teu PC.

5.1 Neteja

• Filtres de pols: Periodically remove and clean the magnetic dust filters located on the top, front, and bottom of the case. Use compressed air or a soft brush to remove accumulated dust.
• Interior: With the system powered off and unplugged, use compressed air to gently remove dust from internal components such as fans, heatsinks, and circuit boards.
• Exterior: Netegeu les superfícies exteriors amb un damp drap. Eviteu productes de neteja o dissolvents abrasius.

5.2 Airflow Optimization

Ensure that the case's ventilation areas are not obstructed. Proper cable management contributes to better airflow, preventing heat buildup inside the case.

6. Solució De Problemes

Aquesta secció tracta problemes comuns que podeu trobar.

6.1 Sense poder

• Verify that the power cable is securely connected to both the PSU and the wall outlet.
• Ensure the PSU's power switch is in the 'ON' position.
• Check that the front panel power switch cable is correctly connected to the motherboard's power header.

6.2 Fans Not Spinning

• Confirmeu que tots els cables d'alimentació del ventilador estiguin connectats correctament a la placa base o a un controlador de ventilador.
• Revisa la configuració de la BIOS/UEFI per assegurar-te que el control del ventilador estigui habilitat i configurat correctament.

6.3 ARGB Lights Not Working

• Ensure the ARGB cables from the front panel and fan are correctly connected to the case's inbuilt LED controller or directly to a 5V 3-pin ARGB header on your motherboard.
• If using motherboard sync, verify that your motherboard's RGB software is installed and configured correctly.
• Try cycling through modes using the front panel LED button to rule out software issues.

6.4 Problemes de sobreescalfament

• Ensure all case fans are spinning and oriented correctly for optimal airflow (intake/exhaust).
• Netegeu els filtres de pols i els components interns tal com es descriu a la secció Manteniment.
• Verify that CPU cooler and GPU fans are functioning properly.

7. Especificacions

8. Informació de la garantia

Antec provides a limited warranty for the Dark Avenger DA601 E-ATX Mid Tower Case. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase (receipt or invoice) as it will be required for any warranty claims. For detailed warranty information, including coverage, limitations, and the claims process, please visit the official Antec website or contact your local Antec distributor.

9. Suport

Should you require technical assistance, have questions about your product, or need customer service, please utilize the following resources:

• Antec oficial Weblloc: Visita www.antec.com per obtenir informació sobre el producte, preguntes freqüents i dades de contacte d'assistència.
• Atenció al client: Refer to the 'Contact Us' section on the Antec website for regional customer support phone numbers or email addresses.