1. Introducció
This manual provides comprehensive instructions for the installation, setup, and operation of your LoraTap WiFi Smart Curtain Switch. This device allows for convenient control of motorized curtains, blinds, and projection screens via touch, mobile application, and voice commands through compatible smart home systems.
Si us plau, llegiu aquest manual detingudament abans de la instal·lació i l'ús per garantir el funcionament correcte i la seguretat.
2. Característiques del producte
- Funció de cronometratge: Schedule automatic opening and closing of curtains via the mobile application.
- Control de l'aplicació: Remote control from anywhere using the "Smart Life" application (2.4 GHz Wi-Fi required).
- Control de veu: Compatible amb Amazon Alexa i Google Home per a un funcionament amb mans lliures.
- Safe Touch Panel: 4mm tempered glass panel for safe operation, even with wet hands.
- Àmplia compatibilitat: Works with most smart curtains, blinds, and projection screens that use a 4-wire motor.
Imatge: Més deview of control methods including remote, timer, touch, and voice control.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- 1 x LoraTap WiFi Curtain Switch
- 1 x Guia de l'usuari (aquest document)
4. Especificacions
| Entrada Voltage | 100-250V 50/60Hz |
| Cablejat | Live wire and Neutral wire required |
| Capacitat de càrrega | ≤600 W |
| Placa de vidre | Vidre temperat de 4 mm |
| Wi-Fi estàndard | 2.4 GHz 802.11 b/g/n (5GHz Wi-Fi not supported) |
| Consum d'energia en espera | ≤0.5 W |
| Temperatura de treball | -30 °C a 70 °C (-22 °F a 158 °F) |
| Dimensions | 72 x 120 x 39mm (approximately 2.83 x 4.72 x 1.54 inches) |
| Material | Acrilonitril butadiè estirè (ABS) |
| Valoració actual | 6 Amps |
| Vol. Operatiutage | 250 Volts |
Image: Physical dimensions of the switch and demonstration of its waterproof tempered glass panel.
5. Informació de seguretat
- Risc elèctric: La instal·lació només l'ha de dur a terme un electricista qualificat o una persona amb coneixements profunds de cablejat elèctric.
- Apagar: Desconnecteu sempre l'alimentació de l'interruptor automàtic abans d'instal·lar, treure o fer el manteniment de l'interruptor.
- Cablejat: This switch requires both a live wire and a neutral wire for operation. Ensure your electrical box has both.
- Compatibilitat del motor: This switch is designed for 4-wire motorized curtains/blinds/shutters (Brown-Open, Blue-Common, Black-Close, Yellow&Green-Ground). It is not compatible with 2-wire motors.
- Només per a ús interior: Do not install this device in outdoor environments or areas exposed to direct water.
6. Instal·lació
- Apagueu l'alimentació: Locate the circuit breaker controlling the power to the switch location and turn it off. Verify power is off using a voltage provador.
- Treure l'interruptor antic: Carefully remove your existing curtain switch from the wall box.
- Identificar els cables: Identify the Live (L), Neutral (N), Open (L1), Close (L2), and Ground wires. This switch requires a neutral wire.
- Connecteu els cables: Connect the wires to the LoraTap WiFi Curtain Switch according to the wiring diagram below. Ensure all connections are secure.
- Interruptor de muntatge: Gently push the switch into the wall box and secure it with screws. Attach the glass panel.
- Restaura l'alimentació: Torneu a encendre l'alimentació al disjuntor.
7. Esquema de cablejat
The LoraTap WiFi Curtain Switch requires a 4-wire motor connection. Refer to the diagram below for correct wiring:
- Entrada L: Live Wire (from mains power)
- Entrada N: Neutral Wire (from mains power)
- Sortida N: Neutral Wire (to motor)
- Sortida L1: Open Wire (to motor, typically Brown)
- Sortida L2: Close Wire (to motor, typically Black)
- Terra: Ground Wire (to motor, typically Yellow & Green)
Image: Detailed wiring diagram showing connections for Input L, Input N, Output N, Output L1, Output L2, and Ground. Also illustrates variable use cases for curtains, blinds, and projector screens.
Important: Ensure your motor has 4 wires (Open, Common, Close, Ground). The common wire from the motor connects to Output N on the switch.
8. App Setup (Smart Life App)
- Descarregar l'aplicació: Baixeu l'aplicació "Smart Life" des de l'App Store (iOS) o Google Play Store (Android).
- Registra't/Inici de sessió: Obre l'aplicació i registra un compte nou o inicia la sessió amb un d'existent.
- Requisits de Wi-Fi: Assegureu-vos que el dispositiu mòbil estigui connectat a un Xarxa Wi-Fi de 2.4 GHz. This switch does not support 5 GHz Wi-Fi. If you have a dual-band router, you may need to separate the 2.4 GHz and 5 GHz bands in your router settings.
- Afegeix un dispositiu: A l'aplicació Smart Life, toca la icona "+" a la cantonada superior dreta per afegir un dispositiu.
- Seleccioneu el tipus de dispositiu: Choose "Curtain Switch" or "Wall Switch (Wi-Fi)" from the list of device types.
- Mode de sincronització: Follow the in-app instructions to put the switch into pairing mode. This usually involves pressing and holding a button on the switch until an indicator light flashes rapidly.
- Connectar: Enter your 2.4 GHz Wi-Fi network password in the app and proceed with the connection.
- Canvia el nom del dispositiu: Once connected, you can rename the switch for easier identification (e.g., "Living Room Curtains").
Image: The LoraTap Smart Curtain Switch shown alongside a smartphone running the Smart Life application, demonstrating app control.
9. Integració del control per veu
The LoraTap WiFi Smart Curtain Switch can be integrated with Amazon Alexa and Google Home for voice control.
9.1. Amazon Alexa Integration
- Obriu l'aplicació Amazon Alexa.
- Ves a "Habilitats i jocs".
- Cerca "Smart Life" and enable the skill.
- Link your Smart Life account with your Alexa account.
- Discover devices. Alexa will find your LoraTap Curtain Switch.
- You can now use voice commands like: "Alexa, open [Curtain Name]", "Alexa, close [Curtain Name]".
9.2. Google Home Integration
- Obriu l'aplicació Google Home.
- Tap "+" then "Set up device" > "Works with Google".
- Cerca "Smart Life" and link your Smart Life account.
- Assign your LoraTap Curtain Switch to a room.
- You can now use voice commands like: "Hey Google, open [Curtain Name]", "Hey Google, close [Curtain Name]".
Image: Illustration of automatic curtain scheduling and voice control integration with Amazon Alexa.
10. Funcionament
10.1. Control del panell tàctil
- Fletxa cap amunt: Touch to open the curtains.
- Square (Pause): Touch to pause the curtains at their current position.
- Fletxa avall: Touch to close the curtains.
10.2. Control d'aplicacions
- Obre l'aplicació "Vida intel·ligent".
- Select your LoraTap Curtain Switch.
- Feu servir els botons virtuals per obrir, tancar o posar en pausa les cortines.
- Set schedules or timers for automated operation.
Image: Demonstrates that multiple users can control one switch, and one command can control a group of switches.
11. Manteniment
- Neteja: Netegeu el panell de vidre amb un damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Actualitzacions de firmware: Periodically check the Smart Life app for available firmware updates to ensure optimal performance and security.
- Eviteu l'aigua: While the panel is tempered glass, avoid excessive water exposure to the internal components.
12. Solució De Problemes
- L'interruptor no respon:
- Check if the circuit breaker is on.
- Verifiqueu que les connexions del cablejat siguin segures i correctes.
- Ensure the motor is a 4-wire type and functioning correctly.
- No es pot connectar a Wi-Fi:
- Confirm your router is broadcasting a 2.4 GHz Wi-Fi network.
- Assegureu-vos que el telèfon estigui connectat a la xarxa de 2.4 GHz durant la configuració.
- Check Wi-Fi signal strength at the switch location.
- Reinicieu el router i torneu a intentar l'emparellament.
- Ensure the switch is in pairing mode (indicator light flashing rapidly).
- El control per veu no funciona:
- Verify the Smart Life skill/service is enabled and linked in your Alexa/Google Home app.
- Ensure the device name in Smart Life matches the name you are using for voice commands.
- Try rediscovering devices in your Alexa/Google Home app.
- Curtains Move in Wrong Direction:
- In the Smart Life app, check if there's an option to reverse motor direction.
- Alternatively, swap the L1 (Open) and L2 (Close) wires at the switch (after turning off power).
13. Garantia i Suport
LoraTap products are designed for reliability and performance. For warranty information, technical support, or assistance with your LoraTap WiFi Smart Curtain Switch, please refer to the contact information provided with your purchase or visit the official LoraTap weblloc.
Conserveu el vostre comprovant de compra per a reclamacions de garantia.
