Manual d'instruccions del suport de paret per a TV Perlegear PGXSF1

1. Introducció

This instruction manual provides detailed guidance for the safe and proper installation, operation, and maintenance of your Perlegear TV Wall Mount, model PGXSF1. Please read this manual thoroughly before installation and retain it for future reference. Incorrect installation may result in product damage or personal injury.

2. Producte acabatview

The Perlegear PGXSF1 is a full-motion TV wall mount designed for flat-screen LED, LCD, and OLED televisions. It offers flexibility in viewing angles and space-saving features.

Característiques principals:

• Compatibilitat de la mida de la pantalla: Fits most 10 to 32-inch televisions.
• Capacitat de pes: Supports TVs up to 20 kg (44 lbs).
• Compatibilitat VESA: 50x50mm, 75x75mm, 100x100mm.
• Moviment:
  • Tilt: +5° to -15°
  • Giració: +/- 90°
  • Rotació: 360°
• Extensió: Retracts to 7.9 cm (3.1 inches) from the wall and extends up to 44 cm (17.3 inches).
• Material: High-grade alloy steel construction.

Figura 2.1: Principal view of the Perlegear PGXSF1 TV Wall Mount.

Figura 2.2: VESA mounting pattern compatibility (50x50mm, 75x75mm, 100x100mm).

Figura 2.3: The mount is tested to support up to 20 kg (44 lbs).

3. Informació de seguretat

ADVERTIMENT: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty.

• Do not begin installation until you have read and understood all instructions and warnings contained in this manual.
• Assegureu-vos que la superfície de muntatge pugui suportar amb seguretat el pes combinat del suport i del televisor.
• This product is designed for installation on wood studs, solid concrete, or brick walls. NO el munteu sol sobre plaques de guix.
• Use only the hardware provided or specified by Perlegear.
• Si teniu cap dubte sobre el procés d'instal·lació, consulteu un professional qualificat.
• Mantingueu els nens i les mascotes allunyats durant la instal·lació.
• Comproveu periòdicament que el suport estigui ben fixat i que tots els elements de fixació estiguin ben ajustats.

4. Contingut del paquet

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact Perlegear customer service.

• 1x TV Wall Mount Assembly (Wall Plate and Arm)
• 2x Wall / Lag Screws
• 2x Wall Screw Washers
• 2x Concrete Anchors (Rawl Plugs)
• 4x M4 Screws (16mm length)
• 4x M4 Screws (30mm length)
• 4x M6 Screws (16mm length)
• 4x M6 Screws (30mm length)
• 4x Spacers (10mm thickness)
• 8x Spacers (5mm thickness)
• 4x Silver Double Washers
• Manual d'instruccions

5. Configuració i instal·lació

Segueix aquests passos amb atenció per a una instal·lació segura.

5.1 Comprovacions prèvies a la instal·lació:

1. Verifica la compatibilitat del televisor: Ensure your TV's screen size is between 10 and 32 inches, its weight does not exceed 20 kg, and its VESA mounting pattern is 50x50mm, 75x75mm, or 100x100mm.
2. Identifiqueu el tipus de paret: Determine if your wall is wood stud, solid concrete, or brick. Do not install on drywall alone.
3. Recollida d'eines: You will need a drill, stud finder (for wood studs), level, pencil, and screwdriver.

5.2 Wall Plate Installation:

1. Marca la ubicació de la perforació: Hold the wall plate against the wall at your desired height. Use a level to ensure it is straight. Mark the two drilling points through the holes on the wall plate.
2. Perforar forats pilot:
   • Per a montants de fusta: Drill two pilot holes (e.g., 5.5mm / 7/32 inch diameter) at the marked locations to a depth of 60mm (2.36 inches).
   • Per a parets de formigó/maó: Drill two pilot holes (e.g., 10mm / 3/8 inch diameter) at the marked locations to a depth of 60mm (2.36 inches). Insert the concrete anchors (rawl plugs) into these holes, ensuring they are flush with the wall surface.
3. Fixeu la placa de paret: Align the wall plate with the pilot holes. Insert the wall/lag screws through the wall plate and into the pilot holes (and anchors if applicable). Use the wall screw washers. Tighten the screws firmly until the wall plate is securely fastened to the wall. Do not overtighten.

5.3 Attaching TV to Mount:

1. Select TV Screws and Spacers: Choose the appropriate M4 or M6 screws that fit your TV's VESA holes. The screws should be long enough to securely engage the TV's threads but not so long as to damage internal components. Use the provided spacers if your TV has an uneven back or recessed mounting holes.
2. Attach Mount to TV: Carefully align the VESA plate of the mount with the mounting holes on the back of your TV. Insert the selected screws through the VESA plate (and spacers if used) and into the TV's mounting holes. Tighten securely with a screwdriver.

6. Instruccions de funcionament

Once installed, your Perlegear PGXSF1 mount allows for various adjustments to optimize your viewexperiència.

Adjusting the TV Position:

• Extensió i retracció: Gently pull the TV away from the wall to extend the arm, or push it towards the wall to retract it. The arm extends up to 44 cm and retracts to 7.9 cm.
• Girar: Carefully pivot the TV left or right up to +/- 90 degrees to achieve the desired horizontal viewing angle. The maximum swivel angle may vary depending on TV size and distance from the wall.

Figura 6.1: Swivel the TV left or right for optimal viewing.
• Inclinació: Ajusteu la vertical viewing angle by tilting the TV +5 degrees upwards or -15 degrees downwards. Loosen the tilt adjustment knobs (if present) slightly, adjust the angle, and then re-tighten to secure.


Figura 6.2: Tilt the TV up or down to reduce glare or adjust viewalçada.

• Rotació: The TV can be rotated 360 degrees, allowing for landscape or portrait orientation. This feature is useful for specific applications or to correct minor leveling issues after installation.


Figura 6.3: Rotate the TV 360 degrees for flexible orientation.

7. Manteniment

Un manteniment regular garanteix la longevitat i el funcionament segur del suport de paret per a televisors.

• Neteja: Netegeu el suport amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
• Comprovacions periòdiques: Every few months, check all screws and bolts to ensure they are securely tightened. Re-tighten if necessary.
• Lubricació: If the swivel or tilt mechanisms become stiff, a small amount of silicone-based lubricant (e.g., WD-40) can be applied to the moving joints. Wipe off any excess.

8. Solució De Problemes

Aquesta secció tracta problemes comuns que podeu trobar.

Issue: Mount movement (swivel/tilt) is stiff.

Solució: The joints may be overtightened or require lubrication. Locate the nuts on the swivel and tilt mechanisms. Slightly loosen them to allow for easier movement, then re-tighten to a comfortable tension. Apply a small amount of silicone-based lubricant to the moving parts if needed.

Issue: TV is not level after installation.

Solució: The 360-degree rotation feature allows for minor leveling adjustments. Gently rotate the TV until it is level. If the issue persists, re-check the wall plate installation with a level.

Issue: Screws do not fit my TV.

Solució: The package includes a variety of M4 and M6 screws of different lengths, along with spacers. Ensure you are using the correct diameter and length for your TV's VESA holes. If none of the provided screws fit, you may need to purchase specific screws compatible with your TV model. Consult your TV's manual for VESA screw specifications.

9. Especificacions

10. Garantia i Suport

This Perlegear TV Wall Mount PGXSF1 comes with a Garantia del fabricant de 10 anys.

For technical assistance, missing parts, or warranty claims, please contact Perlegear customer support. Refer to the product packaging or the official Perlegear weblloc web per obtenir la informació de contacte més actualitzada.

Please have your model number (PGXSF1) and purchase information ready when contacting support.