Moen Genta LX Two-Handle Deck Mounted Modern Roman Tub Faucet

1. Introducció

Thank you for choosing the Moen Genta LX Two-Handle Deck Mounted Modern Roman Tub Faucet. This faucet is designed to bring a sleek, contemporary style to your bathroom with its curved edges and highly reflective chrome finish. This manual provides essential information for the proper installation, operation, and maintenance of your new faucet, ensuring years of reliable performance.

Figure 1.1: The complete Moen Genta LX two-handle Roman tub faucet in a polished chrome finish, featuring a wide, flat spout and two lever handles.

2. Informació de seguretat

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in personal injury, property damage, or product malfunction.

• Always turn off the main water supply before beginning any work on the faucet.
• Utilitzeu ulleres de seguretat durant la instal·lació per protegir els vostres ulls.
• Si teniu dubtes sobre alguna part de la instal·lació, consulteu un lampista qualificat.
• Ensure all connections are secure and leak-free before turning on the water supply.
• No utilitzeu netejadors abrasius ni productes químics agressius sobre l'acabat cromat, ja que això pot danyar la superfície.

3. Llista de peces

Verify that all components are present before beginning installation. This trim kit requires a separate Moen M-PACT valve (models 4792, 4793, 4794, 4796, 4797, or 4798) for complete installation.

• Tub Faucet Trim (Spout and Handles)
• Botó Endoll
• Hex Wrench (5/32”)
• Manual d'instruccions

Figure 3.1: The separate valve assembly required for the installation of the Moen Genta LX tub faucet, showing the hot and cold water inlets and the main valve body.

4. Eines necessàries

Normalment es necessiten les eines següents per a la instal·lació:

• Clau anglesa ajustable
• Destornillador Phillips
• Massilla de lampista o segellador de silicona
• Cinta mètrica
• Ulleres de seguretat
• Llanterna (opcional)

5. Configuració i instal·lació

This section outlines the general steps for installing the Moen Genta LX tub faucet trim. Refer to the specific instructions provided with your Moen M-PACT valve for valve body installation.

1. Prepare the Deck: Ensure the mounting surface is clean, dry, and free of debris. The faucet requires three holes for installation.
2. Instal·leu el cos de la vàlvula: Follow the instructions provided with your Moen M-PACT valve (sold separately) to install the valve body into the tub deck. Ensure it is securely fastened and properly connected to the hot and cold water lines.
3. Instal·leu el broc: Apply a thin bead of plumber's putty or silicone sealant around the base of the faucet spout. Insert the spout into the center hole on the tub deck. From underneath the deck, secure the spout with the provided mounting hardware, tightening it firmly but carefully to avoid overtightening.
4. Instal·leu les nanses: Place the handle escutcheons over the side holes. Connect the handle assemblies to the valve stems, ensuring the hot and cold handles are on the correct sides (typically hot on the left, cold on the right). Secure the handles with the provided screws or set screws, using the 5/32” hex wrench if applicable.
5. Prova de fuites: Once all components are installed and secured, slowly turn on the main water supply. Check all connections for any signs of leaks. If leaks are detected, tighten the connections as necessary.
6. Verificar el funcionament: Operate both handles to ensure smooth water flow and proper temperature control.

6. Instruccions de funcionament

The Moen Genta LX tub faucet features two lever handles for precise control over water flow and temperature.

• Activació/desactivació: Lift the lever handles to turn on the water. Push them down to turn off the water.
• Ajust de temperatura: The left handle controls hot water, and the right handle controls cold water. Adjust both handles simultaneously to achieve your desired water temperature.
• Ajust del flux: The further you lift the handles, the greater the water flow.

7. Manteniment

Proper care and cleaning will help maintain the finish and performance of your Moen faucet.

• Neteja de l'acabat: Netegeu l'acabat cromat amb un drap suau iamp cloth and mild soap. Rinse thoroughly with warm water and dry with a soft cloth to prevent water spots.
• Eviteu els netejadors durs: Do not use abrasive cleaners, harsh chemicals, ammonia-based cleaners, or polishing agents, as these can damage the finish.
• Manteniment de l'airejador: If water flow becomes restricted, the aerator may need cleaning. Unscrew the aerator from the spout, rinse out any debris, and reattach.

8. Solució De Problemes

If you experience issues with your faucet, refer to the following common problems and solutions:

9. Especificacions

10. Garantia i Suport

Els productes Moen es fabriquen sota els més alts estàndards de qualitat i mà d'obra. Aquesta aixeta Moen està avalada per un Garantia limitada de per vida against leaks, drips, and finish defects to the original consumer purchaser.

For detailed warranty information, replacement parts, or technical assistance, please visit the official Moen website or contact Moen customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Note: The M-PACT common valve system allows you to update the faucet style in the future without replacing any plumbing.