MENABO Delta Roof Bar Fixing Kit

Introducció

This user manual provides essential information for the safe and correct installation, operation, and maintenance of your MENABO Delta Roof Bar Fixing Kit. This kit is designed to provide a secure base for roof bars on vehicles with normal roofs, enabling the transport of various cargo.

The kit is compatible with specific vehicle models, including DODGE Journey 5p 08>11, FIAT Freemont 5p 11>, HONDA CR-V IV 5p 12>, MAZDA 2 λ5p 07>09, 3 / Axela (BK) 5p 03>09, MINI Cooper 3p 14>, Cooper S 3p 14>, and One 3p 14>.

Informació de seguretat

• Llegiu i enteneu sempre totes les instruccions abans de la instal·lació i l'ús.
• Ensure all components are securely fastened before driving. Regularly check tightness during use.
• Do not exceed the maximum load capacity specified for your vehicle's roof or the roof bar system. Refer to your vehicle's owner's manual.
• Distribute cargo evenly on the roof bars.
• Adjust driving speed according to road conditions and cargo. Avoid sudden braking or sharp turns.
• Remove the roof bar system when not in use, especially for long periods or automatic car washes.
• Keep children away from the product during installation and removal.

Contingut del paquet

Verify that all components listed below are present in your package. If any parts are missing or damaged, contact your retailer.

Figura 1: Mésview of the MENABO Delta Roof Bar Fixing Kit components. The image displays the various parts required for assembly, including the rubber pads, base plates, vertical supports, metal clamps, and mounting hardware.

• 4 x Rubber Pads (for roof protection)
• 4 x Base Plates (main support for roof bars)
• 4 x Vertical Supports (connect base plate to roof bar)
• 4 x Metal Clamps (secure the kit to the vehicle's roof edge)
• 4 x Bolts with Washers (for assembly)
• Manual d'instruccions (aquest document)

Configuració i instal·lació

Follow these steps carefully to install the MENABO Delta Roof Bar Fixing Kit on your vehicle. Ensure your vehicle is parked on a level surface and the engine is off.

1. Prepare the Roof: Clean the area of the vehicle's roof where the roof bars will be mounted. Ensure it is free of dirt, dust, and debris.
2. Fixeu les pastilles de goma: Place the rubber pads onto the underside of the base plates. These pads protect your vehicle's paintwork.
3. Muntar les unitats base: Connect the vertical supports to the base plates using the provided bolts and washers. Do not fully tighten yet.
4. Position Base Units: Carefully place the assembled base units onto the vehicle's roof, aligning them with the designated mounting points or door frames as per your vehicle's specifications. Ensure the rubber pads are correctly seated.
5. Attach Metal Clamps: Introduïu el cl de metallamps into the base units and hook them securely under the vehicle's door frame or designated roof edge.
6. Instal·lar barres de sostre: Mount your MENABO roof bars (sold separately) onto the vertical supports of the fixing kit. Ensure the bars are centered and evenly spaced.
7. Premeu tots els elements de fixació: Systematically tighten all bolts and clamps. Start by hand-tightening, then use an appropriate tool to ensure a firm, secure fit. Do not overtighten.
8. Comprovació final: Gently pull on the installed roof bar system to confirm it is securely attached and does not move.

Figura 2: Un example of a securely installed MENABO roof bar foot, demonstrating how the base plate and clamp integrate with the vehicle's roof edge.

Instruccions de funcionament

Once installed, the MENABO Delta Roof Bar Fixing Kit provides a stable platform for your roof bars. Proper operation involves understanding load limits and driving considerations.

• Capacitat de càrrega: Always adhere to the maximum load capacity specified by your vehicle manufacturer and the roof bar manufacturer. Never exceed the lower of these two limits.
• Subjecció de la càrrega: Ensure all cargo placed on the roof bars is securely fastened using appropriate straps or tie-downs. Loose cargo can shift during transit, causing damage or accidents.
• Ajustos de conducció: When carrying cargo on the roof, be aware of changes in your vehicle's center of gravity, wind resistance, and overall height. Drive at reduced speeds, especially in crosswinds, and allow for increased braking distances.
• Altura lliure: Be mindful of reduced overhead clearance when entering garages, carports, or low-clearance areas.

Manteniment

Regular maintenance ensures the longevity and safe operation of your roof bar fixing kit.

• Inspecció periòdica: Periodically inspect all components for signs of wear, damage, or corrosion. Check bolts and clamps for tightness, especially after the first few uses and before long journeys.
• Neteja: Clean the components with mild soap and water. Avoid harsh chemicals or abrasive cleaners that could damage the finish or rubber parts.
• Emmagatzematge: If removing the kit for extended periods, store it in a clean, dry place away from direct sunlight and extreme temperatures.

Resolució de problemes

Aquesta secció tracta problemes comuns que podeu trobar.

Especificacions

• Marca: MENABO
• Model: DELTA
• Número de model de l'article: 000096800000
• Pes de l'article: 2.87 lliures (aprox. 1.3 kg)
• Dimensions del paquet: 11.81 x 8.66 x 2.56 polzades (aprox. 30 x 22 x 6.5 cm)
• Tipus de muntatge: Roof Bars (for normal roofs)
• Compatibilitat: DODGE Journey 5p 08>11, FIAT Freemont 5p 11>, HONDA CR-V IV 5p 12>, MAZDA 2 λ5p 07>09, 3 / Axela (BK) 5p 03>09, MINI Cooper 3p 14>, Cooper S 3p 14>, One 3p 14>

Garantia i Suport

For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official MENABO website. For technical support, spare parts, or further assistance, please contact your retailer or MENABO customer service.

MENABO Official Weblloc: www.menabo.it (Note: Link provided as an example, actual link may vary)