Accessory USA AC/DC Adapter Instruction Manual

1. Introducció

This manual provides essential instructions for the safe and effective use of your Accessory USA AC/DC Adapter. This power supply is designed to provide reliable power to compatible Swingline Automatic Stapler models, specifically KA12D072080044U, A-41-616, and 211XX series. Please read this manual thoroughly before use and retain it for future reference.

2. Informació de seguretat

Your Accessory USA AC/DC Adapter is designed with safety in mind, featuring OVP (Over Voltage Protection), OCP (Over Current Protection), and SCP (Short Circuit Protection). It is CE, FCC, and RoHS certified, meeting or exceeding OEM specifications. To ensure safe operation, please observe the following:

• Always ensure the adapter's voltage and current specifications match your device's requirements before connecting.
• No exposeu l'adaptador a l'aigua, la humitat ni a temperatures extremes.
• Eviteu deixar caure l'adaptador ni sotmetre'l a impactes forts.
• No intenteu obrir ni modificar l'adaptador. Encarregueu totes les tasques de manteniment a personal qualificat.
• Desendolleu l'adaptador de la presa de corrent quan no l'utilitzeu durant períodes prolongats.
• Mantenir fora de l'abast dels nens.

3. Configuració

Follow these steps to set up your AC/DC adapter:

1. Verificar la compatibilitat: Before connecting, confirm that your Swingline Automatic Stapler model is compatible with this adapter (e.g., KA12D072080044U, A-41-616, 211XX series).
2. Connecta't al dispositiu: Insert the barrel connector end of the adapter firmly into the power input port of your Swingline Automatic Stapler.
3. Connecteu-vos a la presa de corrent: Plug the 2-pin main power connector of the adapter into a standard, grounded electrical wall outlet.
4. Encès: Once connected, your stapler should receive power. Refer to your stapler's manual for specific power-on procedures.

Image showing the Accessory USA AC/DC Adapter, a black power supply unit with a barrel connector, ready for connection.

4. Instruccions de funcionament

The Accessory USA AC/DC Adapter functions as a power source for your compatible Swingline Automatic Stapler. Once properly connected as described in the Setup section, the adapter continuously supplies power to the stapler. There are no operational controls on the adapter itself. For instructions on operating your stapler, please refer to the specific user manual provided with your Swingline Automatic Stapler.

5. Manteniment

Un manteniment adequat garanteix la longevitat i el funcionament segur del vostre adaptador:

• Neteja: Disconnect the adapter from both the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
• Emmagatzematge: Guardeu l'adaptador en un lloc fresc i sec, allunyat de la llum solar directa i la humitat quan no l'utilitzeu. Eviteu enrotllar el cable massa fort per evitar danys.
• Inspecció: Periodically inspect the adapter and its cable for any signs of damage, such as cuts, fraying, or bent pins. If damage is observed, discontinue use immediately and replace the adapter.

6. Solució De Problemes

If you experience issues with your adapter, consider the following:

• Sense alimentació al dispositiu:
  • Ensure the adapter is securely plugged into both the wall outlet and the stapler.
  • Comproveu si la presa de corrent funciona connectant-hi un altre dispositiu.
  • Verify that the stapler's power switch (if any) is in the 'ON' position.
  • Confirm that the adapter model is correct for your stapler.
• Sobreescalfament de l'adaptador:
  • Desendolleu l'adaptador immediatament.
  • Ensure the adapter is used in a well-ventilated area and not covered.
  • If overheating persists, discontinue use and replace the adapter.

If troubleshooting steps do not resolve the issue, please contact Accessory USA customer support.

7. Especificacions

8. Garantia i Suport

For warranty information or technical support regarding your Accessory USA AC/DC Adapter, please contact Accessory USA directly. Refer to the packaging or the retailer's website for specific contact details. Please have your product model number (KA12D072080044U or A-41-616) and purchase information available when contacting support.