Introducció
Gràcies per la compraasing the VONYX AM8A 8-Channel Mixer Amplifier. This integrated mixer and amplifier unit is designed for professional sound reinforcement applications, offering 8 input channels, a powerful 1000W amplifier, Bluetooth connectivity, MP3/USB/SD playback, and 16 digital effects. Please read this manual thoroughly to understand the product's features and ensure safe and optimal operation.
Instruccions de seguretat
- Font d'alimentació: Connect the unit only to a grounded mains outlet with the specified voltage (230Vac/50Hz). Ensure the power cord is not damaged or pinched.
- Humitat: Do not expose the unit to rain, moisture, dripping, or splashing liquids. Do not place objects filled with liquids on the unit.
- Ventilació: Assegureu-vos que hi hagi una ventilació adequada. No bloquegeu les obertures de ventilació. Eviteu col·locar la unitat sobre superfícies toves que puguin obstruir el flux d'aire.
- Calor: Mantingueu la unitat allunyada de fonts de calor com ara radiadors, registres de calor, estufes o altres aparells que produeixin calor.
- Manteniment: No intenteu fer el manteniment de la unitat vosaltres mateixos. Envieu totes les tasques de manteniment a personal de servei qualificat.
- Neteja: Disconnect the unit from the power supply before cleaning. Use a dry cloth for cleaning.
- Col·locació: Col·loqueu la unitat sobre una superfície estable i plana per evitar que caigui.
Producte acabatview
The VONYX AM8A combines an 8-channel mixer with a powerful amplifier, offering versatile audio control and output capabilities. Key features include:
- Integrated 2x 500W (4 Ohm) / 2x 300W (8 Ohm) power ampmés viu.
- Built-in MP3 player with USB and SD card slots.
- Bluetooth receiver for wireless audio streaming.
- +48V Phantom power for condenser microphones.
- 5-band graphic equalizer for main output.
- DSP with 16 digital effects.
- PFL (Pre-Fader Listen) function per channel.
- Multiple input options: XLR microphone, 6.3mm jack line, RCA line.
- Tone control (Hi/Low) per channel.
- Speaker outputs (6.3mm jack) and XLR line outputs.
Figura 1: Davant view of the VONYX AM8A 8-Channel Mixer Amplifier, showing all input channels, controls, and the master section.
Figura 2: Close-up of the VONYX AM8A's graphic equalizer and master controls, including the DSP effects section.
Figura 3: Detail of the integrated MP3 player with USB and SD card slots, and Bluetooth functionality on the VONYX AM8A.
Configuració
1. Desembalatge
Carefully remove the mixer amplifier from its packaging. Inspect the unit for any signs of damage during transit. Retain the original packaging for future transport or storage.
2. Connexió d'alimentació
- Assegureu-vos que l'interruptor d'alimentació del panell posterior estigui en la posició OFF.
- Connect the supplied power cable to the AC IN socket on the rear panel of the mixer ampmés viu.
- Plug the other end of the power cable into a suitable grounded 230Vac/50Hz mains outlet.
3. Connexions d'entrada
The AM8A features 8 input channels, each with XLR microphone inputs and 6.3mm jack line inputs. Additional RCA inputs are available for stereo sources.
- Micròfons: Connect microphones to the XLR inputs (CH1-CH8). If using condenser microphones, activate the +48V Phantom Power switch (located near the master section) after all microphones are connected and before powering on.
- Dispositius de nivell de línia: Connect instruments, keyboards, or other line-level devices to the 6.3mm jack inputs (CH1-CH8). For stereo sources, use the RCA inputs.
4. Connexions de sortida
Connect your passive speakers and monitoring devices to the appropriate outputs.
- Ponents: Connect passive speakers to the 6.3mm jack SPEAKER OUTPUTS (LEFT and RIGHT) on the rear panel. Ensure the impedance of your speakers matches the amplifier's specifications (4-8 Ohm).
- Extern Amplifiers/Recording Devices: Use the XLR MAIN OUTPUTS (LEFT and RIGHT) to connect to external power ampLificadors o aparells de gravació.
- Auriculars: Plug headphones into the 6.3mm jack HEADPHONES output on the front panel for monitoring.
Figura 4: Rear panel of the VONYX AM8A, showing power input, main outputs, and speaker outputs.
Instruccions de funcionament
1. Encès / apagat
- Before powering on, ensure all channel faders and the main fader are set to their minimum positions.
- Gireu l'interruptor POWER del panell posterior a la posició ON.
- To power off, reverse the process: lower all faders, then switch off the unit.
2. Channel Controls (CH1-CH8)
- GUANY: Adjusts the input sensitivity for each channel. Set this to achieve a strong signal without clipping (distortion).
- HI/LOW EQ: Two-band equalizer for adjusting the high and low frequencies of each channel.
- EFF: Controls the amount of signal sent to the internal DSP effects processor.
- PA: Adjusts the stereo position (left to right) of the channel's signal.
- PFL: (Pre-Fader Listen) Activates monitoring of the channel's signal through headphones, independent of the channel fader.
- CHANNEL FADER: Controls the output level of each individual channel to the main mix.
3. Master Controls
- MAIN FADER (L+R): Controls the overall output volume of the mixer ampmés viu.
- TELÈFONS: Ajusta el volum de la sortida dels auriculars.
- GRAPHIC EQUALIZER: A 5-band equalizer (70Hz, 250Hz, 1KHz, 4KHz, 12KHz) to fine-tune the overall frequency response of the main mix.
- DSP EFFECTS: Select from 16 digital effects using the 'UP' and 'DOWN' buttons. Adjust the 'EFF LEVEL' knob to control the wet/dry mix of the effects.
- +48V PHANTOM: Activates phantom power for condenser microphones connected to the XLR inputs.
4. MP3/USB/SD Player & Bluetooth
The integrated media player supports USB drives and SD cards for MP3 playback, and also features Bluetooth connectivity.
- Reproducció USB/SD: Insert a USB drive or SD card into the respective slot. The unit will automatically detect and begin playing compatible audio files. Use the transport controls (Play/Pause, Skip) to navigate.
- Emparellament Bluetooth: Activate Bluetooth on your mobile device. Select 'VONYX AM8A' from the list of available devices. Once paired, you can stream audio wirelessly to the mixer ampmés viu.
- Selecció del mode: Use the 'MODE' button to switch between USB, SD, and Bluetooth input sources.
Manteniment
- Neteja: Regularly clean the unit with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or chemical sprays.
- Ventilació: Ensure the ventilation grilles are free from dust and debris to maintain proper cooling.
- Emmagatzematge: When not in use for extended periods, store the unit in a cool, dry place, preferably in its original packaging, away from direct sunlight and extreme temperatures.
- Gestió de cables: Mantingueu els cables organitzats i lliures de doblegaments o doblegaments excessius per evitar danys.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense poder | Power cable disconnected; Power switch off; Blown fuse | Check power cable connection; Ensure power switch is ON; Replace fuse if necessary (refer to qualified technician). |
| Sense sortida de so | Main fader down; Channel fader down; Speaker cables disconnected/faulty; Incorrect input selection; Amplifier protection mode | Raise main and channel faders; Check speaker connections; Verify input source; Power cycle the unit. |
| So distorsionat | Input gain too high; Output level too high; Faulty cable/speaker | Reduce input GAIN; Lower main fader; Check all cables and speakers. |
| El micròfon no funciona | Microphone not connected; Phantom power off (for condenser mics); Channel fader down; Faulty microphone/cable | Check microphone connection; Activate +48V Phantom Power; Raise channel fader; Test with another microphone/cable. |
| Bluetooth no connectat | Bluetooth not enabled on device; Unit not in Bluetooth mode; Device too far | Ensure Bluetooth is active on your device; Press MODE button to select Bluetooth; Move device closer to the mixer. |
Especificacions
| Característica | Especificació |
|---|---|
| Número de model | 172.574 |
| Power Output (4 Ohm) | 2 x 500 W |
| Power Output (8 Ohm) | 2 x 300 W |
| Interval de freqüència | 20 Hz - 20 kHz |
| THD (distorsió harmònica total) | <0.1% |
| EQ Hola | ± 15 dB / 12 kHz |
| EQ Lo | ± 15 dB / 70 Hz |
| Sensibilitat d'entrada de línia | +5 dB ~ -40 dB |
| Sensibilitat d'entrada de micròfon | -15dB ~ -60dB |
| Nivell de sortida | +12 dB (3 V) |
| Sortida d'auriculars | 300mW @ 32 Ohm |
| Connexió Voltage | 230Vac / 50Hz |
| Dimensions (L x A x A) | 320 x 300 x 140 mm |
| Pes | 12 kg |
| Nombre de canals | 8 |
| Tecnologia de connectivitat | USB, Bluetooth |
| Entrada d'àudio | XLR, RCA, 6.35mm Jack, USB |
| Tipus de connector de sortida | XLR, 6.35mm TRS |
Garantia i Suport
VONYX products are designed for reliability and performance. For warranty information, please refer to the terms and conditions provided at the point of purchase or contact your local VONYX dealer. For technical support or service inquiries, please visit the official VONYX weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.
