1. Introducció
This instruction manual provides essential information for the proper installation, maintenance, and care of your Puig R19 Frame Sliders. These frame sliders are designed to offer protection to your motorcycle's frame and engine components in the event of a slide or fall. For optimal performance and safety, please read this manual thoroughly before proceeding with installation or use.
Puig R19 Frame Sliders are engineered for specific motorcycle models to ensure precise fitment and effective protection. Always verify compatibility with your motorcycle model before installation.
2. Producte acabatview
The Puig R19 Frame Sliders consist of durable protective elements designed to absorb impact and reduce damage during a motorcycle slide. The primary protective component is typically made from a high-resistance material, often with a rubber or nylon outer layer to enhance energy absorption and sliding characteristics.
Each set of R19 Frame Sliders is manufactured to integrate seamlessly with the specific frame structure of compatible motorcycle models, ensuring that mounting points are secure and the sliders provide effective coverage without interfering with other motorcycle components.
3. Què hi ha a la caixa
Your Puig R19 Frame Sliders package should contain the following items:
- Puig R19 Frame Sliders (Left and Right)
- Mounting Hardware (bolts, washers, spacers as required for your specific model)
- Llibret d'instruccions (aquest manual)
Please inspect all components upon receipt to ensure no parts are missing or damaged.
4. Configuració i instal·lació
Installation of the Puig R19 Frame Sliders requires basic mechanical knowledge and appropriate tools. If you are unsure about any step, it is recommended to seek professional installation from a qualified motorcycle technician.
4.1. Passos generals d'instal·lació
- Preparació: Park your motorcycle on a stable, level surface. Ensure the engine is cool. Gather all necessary tools (e.g., wrenches, torque wrench).
- Identificar els punts de muntatge: Refer to the specific instructions provided with your frame sliders for your motorcycle model. Frame sliders typically mount to existing engine or frame bolts.
- Remove Existing Bolts (if applicable): Carefully remove the designated factory bolts one side at a time. Support any components that might become loose.
- Install Frame Slider Bracket: Attach the mounting bracket (if separate) to the motorcycle frame using the provided hardware. Ensure correct orientation.
- Attach Slider Body: Secure the R19 slider body to the bracket or directly to the frame using the new bolts and spacers as indicated in your model-specific instructions.
- Perns de parell: Tighten all bolts to the torque specifications provided in your motorcycle's service manual or the Puig instructions. Overtightening or undertightening can lead to damage or failure.
- Repetiu per a l'altre costat: Follow the same procedure for the opposite side of the motorcycle.
- Comprovació final: Verify that both frame sliders are securely mounted and do not interfere with steering, suspension, or other moving parts.
Important: Do not modify the frame sliders or your motorcycle's frame for installation. Always use the provided hardware.
Image 1: Puig R19 Frame Slider securely installed on the side of a motorcycle engine block, demonstrating its position for protection. The slider features a black base with a grey, textured protective cap.
5. Manteniment
To ensure the longevity and effectiveness of your Puig R19 Frame Sliders, regular maintenance is recommended:
- Inspecció periòdica: Periodically check the frame sliders for any signs of damage, cracks, or wear. Inspect the mounting bolts for tightness.
- Neteja: Clean the sliders with a mild soap and water solution. Avoid harsh chemicals that could degrade the material.
- Post-Incident Check: After any incident involving a fall or slide, thoroughly inspect the frame sliders and their mounting points for damage. Even minor impacts can compromise their structural integrity. Replace damaged sliders immediately.
6. Solució De Problemes
Puig R19 Frame Sliders are passive protection devices and generally do not require "troubleshooting" in the traditional sense. However, if you encounter issues:
- Loose Slider: If a slider feels loose, check the mounting bolts. Retighten to the specified torque. If the bolts are stripped or damaged, replace them.
- Damage After Impact: If a slider has sustained damage from a fall or impact, it has fulfilled its purpose. The damaged slider and potentially its mounting hardware should be replaced immediately to ensure continued protection. Do not attempt to repair damaged sliders.
- Problemes d'ajust: If the sliders do not fit correctly, double-check that you have the correct model-specific sliders for your motorcycle. Refer to the product packaging and your motorcycle's specifications.
7. Especificacions
| Característica | Detall |
|---|---|
| Marca | Puig |
| Número de model | 9960 N |
| Material | Rubber (outer layer), Nylon (spare parts available) |
| Color | Black (main body), Grey (rubber cap) |
| Pes de l'article | 2.21 lliures (aprox.) |
| Dimensions del producte | 3.7 x 7.17 x 12.6 polzades (embalatge/total) |
| Tipus de servei del vehicle | Street-Sport-Motorcycles |
8. Informació de la garantia
Specific warranty details for Puig R19 Frame Sliders are typically provided by the manufacturer or the retailer at the time of purchase. Please refer to your purchase documentation or visit the official Puig website for the most current warranty policy. Keep your proof of purchase for any warranty claims.
9. Atenció al client
For technical assistance, installation queries, or spare parts, please contact your authorized Puig dealer or the retailer from whom you purchased the product. You may also find additional support resources, FAQs, and contact information on the official Puig weblloc.
