Puig 9770H Touring Screen User Manual

1. Introducció

This manual provides essential information for the installation, operation, and maintenance of your Puig 9770H Touring Screen. Designed specifically for the BMW F750GS models from 2018 to 2021, this touring screen enhances rider comfort by providing improved wind protection.

Si us plau, llegiu aquest manual detingudament abans d'intentar la instal·lació o l'ús per garantir-ne el funcionament correcte i la seguretat.

2. Informació de seguretat

Always prioritize safety during installation and operation. Failure to follow these instructions may result in injury or damage to the product or motorcycle.

• Ensure the motorcycle is stable and on a level surface before beginning installation.
• Turn off the motorcycle engine and remove the key.
• Utilitzeu equips de protecció individual adequats, com ara guants i ulleres de protecció.
• Do not overtighten fasteners, as this can damage components. Refer to specific torque specifications if available in the motorcycle's service manual.
• Regularly inspect the touring screen and mounting hardware for any signs of wear, damage, or looseness.
• Advertència de la proposta 65: Aquest producte pot contenir productes químics coneguts per l'estat de Califòrnia per causar càncer i defectes de naixement o altres danys reproductius. Rentar-se les mans després de la manipulació.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents i no estiguin danyats abans de continuar amb la instal·lació.

• 1 x Puig 9770H Touring Screen (Smoke color)
• Mounting Hardware Kit (specific components may vary, refer to included diagram)
• Instruccions d'instal·lació (aquest manual)

Figure 3.1: Puig 9770H Touring Screen mounted on a BMW F750GS.

4. Configuració i instal·lació

Installation of the Puig 9770H Touring Screen is designed to be straightforward. It is recommended to have basic mechanical skills and tools for this procedure.

4.1 Eines necessàries (no incloses)

• Joc de claus hexagonals (claus Allen)
• Torx bit set (if applicable for existing fasteners)
• Joc de claus de sòcol
• Drap suau

4.2 Passos d'instal·lació

1. Preparació de la motocicleta: Park the motorcycle on its center stand or a paddock stand on a firm, level surface. Ensure the engine is off and cool.
2. Remove Existing Windscreen: Carefully locate and remove the bolts securing the original windscreen. Keep the original rubber washers, as they may be required for the new installation.
3. Position the New Screen: Align the Puig 9770H Touring Screen with the mounting points on the motorcycle.
4. Instal·leu el maquinari de muntatge: Use the provided mounting hardware to secure the new screen. It is crucial to use the original rubber washers from the stock windscreen if they provide a better fit and prevent vibration.
5. Apretar els elements de fixació: Hand-tighten all bolts initially to ensure proper alignment. Once aligned, progressively tighten all fasteners evenly. Avoid overtightening.
6. Comprovació final: Gently push and pull on the installed screen to ensure it is securely mounted and does not wobble. Verify that all fasteners are tight.

Figura 4.1: Detallada view of the Puig 9770H Touring Screen.

5. Consideracions operatives

The Puig 9770H Touring Screen is designed to improve aerodynamic protection and rider comfort. While it does not have adjustable features, its design provides a significant upgrade over standard screens.

• Protecció del vent: The increased height and curvature of the touring screen are intended to deflect wind and debris away from the rider's torso and helmet, reducing fatigue on long rides.
• Visibilitat: The smoke tint provides glare reduction while maintaining clear visibility through the screen. Ensure your riding position allows for clear vision over or through the screen.
• Vibració: Some minor vibration at higher speeds may occur, which is typical for aftermarket screens. Ensure all mounting points are secure to minimize this.

6. Manteniment

Proper maintenance will extend the life and maintain the clarity of your Puig Touring Screen.

• Neteja: Clean the screen regularly with mild soap and water using a soft, non-abrasive cloth. Avoid harsh chemicals, ammonia-based cleaners, or abrasive materials, as these can scratch or damage the screen's surface.
• Inspecció: Periodically check all mounting bolts for tightness. Vibrations from riding can cause fasteners to loosen over time. Inspect the screen for cracks or deep scratches that could impair visibility or structural integrity.
• Emmagatzematge: When not in use for extended periods, store the motorcycle in a shaded area or cover the screen to protect it from prolonged exposure to direct sunlight, which can cause material degradation.

7. Solució De Problemes

This section addresses common issues you might encounter with your touring screen.

8. Especificacions

9. Garantia i Suport

Puig products are manufactured to high quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Puig weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.

For technical support or inquiries regarding your Puig 9770H Touring Screen, please contact Puig customer service through their official channels. Contact information can typically be found on their weblloc o embalatge del producte.