Datalogic Powerscan M8500 Barcode Scanner and Cradle USB Wireless User Manual

Introducció

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Datalogic Powerscan M8500 Barcode Scanner and its associated USB Wireless Cradle. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

Informació de seguretat

• Do not expose the scanner or cradle to extreme temperatures, moisture, or direct sunlight.
• Eviteu deixar caure el dispositiu o sotmetre'l a impactes forts.
• Do not attempt to open or modify the scanner or cradle. Refer all servicing to qualified personnel.
• Use only Datalogic-approved accessories and power supplies.
• Mantingueu el dispositiu allunyat de camps magnètics forts.

Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• Datalogic Powerscan M8500 Barcode Scanner
• Datalogic USB Wireless Cradle
• Cable USB

Configuració

1. Connectant el bressol

1. Connect one end of the provided USB cable to the USB port on the Datalogic Wireless Cradle.
2. Connect the other end of the USB cable to an available USB port on your computer (Desktop or Laptop).
3. The cradle's indicator light should illuminate, indicating it is powered on.

2. Pairing the Scanner

The scanner and cradle are typically pre-paired. If pairing is required:

• Ensure the cradle is connected and powered.
• Place the scanner into the cradle. The scanner should emit a beep or flash an indicator light to confirm connection.
• If the scanner does not pair automatically, refer to the Datalogic Powerscan M8500 Advanced Configuration Guide for specific pairing barcode sequences.

3. Càrrega de l'escàner

To charge the scanner, simply place it into the connected cradle. The scanner's charging indicator light will show its charging status. A full charge typically takes several hours.

Funcionament de l'escàner

Escaneig de codis de barres

1. Ensure the scanner is charged and paired with its cradle.
2. Apunteu la finestra de l'escàner cap al codi de barres que voleu escanejar.
3. Press and hold the trigger button. A red aiming line or dot will appear.
4. Center the aiming line/dot over the barcode.
5. Once successfully scanned, the scanner will emit a beep and/or flash an indicator light, and the barcode data will be transmitted to your connected computer.

Indicator Lights and Sounds

The scanner and cradle use various indicator lights and audible signals to communicate status:

• Green Light/Single Beep: Successful scan.
• Red Light/Multiple Beeps: Scan error or battery low.
• Flashing Light (Scanner): Searching for cradle connection.
• Solid Light (Cradle): Powered on and connected.

Manteniment

Neteja

• Utilitzeu un drap suau i sense pelusa dampened with water or a mild cleaning solution to clean the exterior of the scanner and cradle.
• Do not use abrasive cleaners, solvents, or excessive moisture.
• Gently wipe the scanner's window to ensure optimal scanning performance.

Cura de la bateria

• For optimal battery life, avoid fully discharging the scanner's battery frequently.
• Guardeu l'escàner en un lloc fresc i sec quan no l'utilitzeu durant períodes prolongats.
• If the battery performance significantly degrades, contact Datalogic support for replacement options.

Resolució de problemes

Especificacions

Garantia i Suport

For warranty information, technical support, or service inquiries, please refer to the official Datalogic website or contact your authorized Datalogic reseller. Keep your purchase receipt as proof of purchase.