1. Introducció
This manual provides essential information for the safe and effective use of your Sealey S01182 #3 x 150mm Phillips Screwdriver. Designed for light craft and DIY applications, this tool features a durable construction and ergonomic design for comfortable and efficient use. Please read these instructions carefully before using the screwdriver and retain them for future reference.
2. Característiques del producte
- Chrome Vanadium Shaft: The shaft is constructed from high-grade Chrome Vanadium steel, known for its strength and durability.
- Satin Finish: The shaft features a satin finish, providing corrosion protection and resistance to scratches and fingerprints, while also improving grip.
- Shot-Blasted and Magnetized Tip: The Phillips tip is shot-blasted for enhanced grip on fasteners and magnetized to securely hold screws, preventing drops.
- Contoured Soft-Grip Handle: The ergonomically designed handle offers a comfortable and secure grip, reducing hand fatigue during prolonged use.
- Color-Coded for Quick Identification: The handle is color-coded for easy identification of the screwdriver type (Phillips) and size.
Figure 2.1: Features of the satin finish shaft, including corrosion protection and improved grip.
3. Configuració
The Sealey S01182 Phillips Screwdriver requires no assembly. It is ready for immediate use upon receipt.
- Inspecció: Before each use, visually inspect the screwdriver for any signs of damage, such as a bent shaft, worn tip, or cracked handle. Do not use a damaged tool.
- Selecció: Ensure you are using the correct size Phillips screwdriver (#3) for the fastener to prevent stripping the screw head or damaging the screwdriver tip.
Figure 3.1: The Sealey S01182 Phillips Screwdriver ready for use.
4. Instruccions de funcionament
Follow these steps for safe and effective operation of your Phillips screwdriver:
- Posicionament: Place the tip of the screwdriver into the corresponding Phillips head screw. Ensure the tip is fully seated in the screw head to prevent cam-out.
- Aplicació de pressió: Apply firm, downward pressure on the handle to keep the tip engaged with the screw.
- Girar: Rotate the handle clockwise to tighten the screw or counter-clockwise to loosen it. Maintain consistent downward pressure throughout the turning motion.
- Acabats: Stop turning once the screw is adequately tightened or loosened. Avoid over-tightening, which can strip the screw or damage the material.
Figure 4.1: Proper grip and angle for operating the screwdriver.
5. Manteniment
Proper maintenance will extend the life of your Sealey screwdriver:
- Neteja: After each use, wipe the shaft and handle with a clean, dry cloth to remove dirt, grease, or debris. For stubborn grime, a mild detergent solution can be used, followed by thorough drying.
- Emmagatzematge: Store the screwdriver in a dry environment, away from excessive moisture or corrosive chemicals, to prevent rust or material degradation. Keep it in a toolbox or on a tool rack to protect the tip from damage.
- Tip Condition: Regularly check the Phillips tip for wear. A worn or rounded tip can lead to stripped screws and reduced effectiveness. Replace the screwdriver if the tip is significantly damaged.
6. Solució De Problemes
Most issues with a screwdriver are related to improper use or wear. Here are some common scenarios:
- Desmuntatge del capçal del cargol: If the screw head is stripping, ensure you are using the correct size Phillips screwdriver (#3) and applying sufficient downward pressure. A worn screwdriver tip can also cause stripping.
- Screwdriver Tip Slipping: This often indicates insufficient downward pressure, an incorrect screwdriver size, or a worn tip. Ensure the tip is fully engaged and replace the tool if the tip is damaged.
- Difficulty Turning: If a screw is difficult to turn, do not force it. This could indicate a rusted screw, cross-threading, or an obstruction. Consider using a penetrating oil for rusted screws or re-evaluating the fastener.
7. Especificacions
| Especificació | Detall |
|---|---|
| Marca | Sealey |
| Número de model | S01182 |
| Nom del model | #3 x 150mm Phillips Screwdriver |
| Número de part | S01182 |
| Tipus de consell | Phillips (#3) |
| Longitud de l'eix | 150 mm |
| Dimensions totals (L x A x A) | 31.5 x 5 x 4 cm |
| Pes de l'article | 150 grams |
| Material | Chrome Vanadium Steel (Shaft) |
| Necessites piles? | No |
| GTIN | 05054511508437 |
8. Garantia i Suport
Sealey products are manufactured to high standards and, with proper use and maintenance, are designed for long-lasting performance. This product is covered by a Sealey Lifetime Guarantee.
For specific warranty terms and conditions, or for technical support, please refer to the official Sealey weblloc web o poseu-vos en contacte amb el vostre distribuïdor autoritzat de Sealey. Conserveu el comprovant de compra per a reclamacions de garantia.
Figure 8.1: Sealey Lifetime Guarantee information.
