Came 8K01MP-012 AXI20K05 Swing Gate Kit Instruction Manual

1. Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Came 8K01MP-012 AXI20K05 Swing Gate Kit. This kit is designed for automating swing gates up to 2 meters in length per leaf, operating on a 24V DC system. Please read this manual carefully before proceeding with any installation or operation to ensure safe and correct use of the product.

The Came Axi motor combines advanced technical solutions with sophisticated electronics, ensuring consistent movement and linear slowdowns. This system is engineered for high performance, even under intensive use, providing a secure and reliable automation solution.

Figura 1: Mésview of the Came 8K01MP-012 AXI20K05 Swing Gate Kit components.

2. Informació de seguretat

ADVERTÈNCIA: Una instal·lació o un ús incorrectes poden provocar lesions greus o danys materials. Seguiu sempre les pautes de seguretat.

Installation must be performed by qualified personnel in compliance with local regulations and safety standards.
Desconnecteu l'alimentació abans de realitzar qualsevol procediment de manteniment o instal·lació.
Assegureu-vos que totes les parts mòbils estiguin lliures d'obstacles durant el funcionament.
Do not allow children to play near the gate or operate the controls.
Regularly inspect the system for wear, damage, or misalignment.
The safety photocells must be correctly installed and tested to prevent accidental closure.

3. Contingut del paquet

The Came 8K01MP-012 AXI20K05 kit includes the following components:

2x 001SWN20 AXI20DGS Motors: For swing gates up to 2 meters, 24V DC.
1x 002ZL65 Control Panel: For single or double swing gates.
2x 001TOP-432EE Transmitters: Two-channel, multi-power, 433.92 MHz.
1x 001KLED24 LED Flasher: Signaling light.
1x 001KIAROS Wall Mounting Bracket: For the flasher.
1x 001DIR10 Photocell Pair: 12-24V AC-DC, 10m range.
1x 001AF43S Radio Frequency Board: 433.92 MHz connection.
1x 119RV826 Signaling Plate: Senyal d'advertència.

4. Guia d'instal·lació

This section outlines the general steps for installing the Came 8K01MP-012 AXI20K05 swing gate kit. Refer to the detailed diagrams and specific instructions provided with each component for precise measurements and connections.

4.1 Comprovacions prèvies a la instal·lació

Ensure the gate structure is robust, well-balanced, and moves freely without friction.
Verify that the gate hinges are in good condition and allow for smooth operation.
Confirm availability of a suitable power supply (24V DC).
Plan the cable routing to protect against damage and ensure proper insulation.

4.2 Motor Installation (001SWN20 AXI20DGS)

Mount the motor brackets securely to the gate post and gate leaf according to the provided template. Ensure correct alignment for optimal gate movement.
Attach the motors to the brackets. The motors should be level and allow for the full range of gate motion.
Connect the motor cables to the control panel, following the wiring diagram.

Figure 2: Illustration of motor mounting on a gate post and leaf. (Image not provided, refer to product manual for detailed diagram).

4.3 Control Panel Installation (002ZL65)

Install the control panel in a protected, easily accessible location, away from direct weather exposure.
Connect the main power supply to the control panel.
Connect the motor cables, photocells, flasher, and radio frequency board to the designated terminals on the control panel.

4.4 Photocell Installation (001DIR10)

Mount the transmitter and receiver photocells opposite each other, ensuring a clear line of sight across the gate opening.
Connect the photocell wiring to the control panel as per the wiring diagram.
Test the photocells to ensure they detect obstructions correctly.

4.5 LED Flasher Installation (001KLED24)

Mount the LED flasher in a visible location using the 001KIAROS wall mounting bracket.
Connect the flasher to the control panel.

4.6 Esquema de cablejat

A detailed wiring diagram is crucial for correct installation. Please refer to the specific diagram included with your 002ZL65 Control Panel. Ensure all connections are secure and correctly polarized.

Figura 3: Example wiring diagram for the 002ZL65 control panel. (Image not provided, refer to product manual for detailed diagram).

5. Instruccions de funcionament

Once installed and configured, the gate system can be operated using the provided transmitters.

5.1 Programming Transmitters (001TOP-432EE)

To program the 001TOP-432EE transmitters with the 002ZL65 control panel:

Access the programming mode on the 002ZL65 control panel (refer to the control panel manual for specific button sequences).
Press the desired button on the 001TOP-432EE transmitter. The control panel will confirm successful programming (e.g., via an LED indicator or sound).
Repeat for all desired transmitters.
Exit programming mode on the control panel.

5.2 Funcionament bàsic

Obertura/tancament: Press the programmed button on the transmitter. The gate will open or close. Pressing again during movement will stop the gate.
Parada de seguretat: If the photocells detect an obstruction during closing, the gate will stop and reverse.
Alliberament manual: In case of power failure, use the manual release mechanism on the motors to operate the gate manually. Refer to the motor manual for specific instructions on engaging/disengaging the release.

6. Manteniment

Regular maintenance ensures the longevity and safe operation of your Came swing gate kit.

Mensual: Check the gate's mechanical parts (hinges, wheels, guides) for wear or damage. Ensure the gate moves freely.
Trimestral: Test the safety photocells by placing an object in their path during gate closure. The gate should stop and reverse.
Anualment: Inspect all electrical connections for corrosion or loose wiring. Clean the motor housing and control panel enclosure to prevent dust and debris buildup. Lubricate moving parts of the gate as recommended by the gate manufacturer.
Inspecció professional: It is recommended to have a qualified technician inspect the system annually.

7. Solució De Problemes

This section addresses common issues you might encounter. For more complex problems, contact a qualified technician.

Problema	Causa possible	Solució
Gate does not respond to transmitter.	No power to control panel; Transmitter battery low/dead; Transmitter not programmed; Photocell obstruction.	Check power supply; Replace transmitter battery; Reprogram transmitter; Clear photocell path.
La porta s'atura o inverteix el sentit de la marxa inesperadament.	Photocell obstruction; Safety edge activated; Motor overload.	Clear photocell path; Check safety edges; Reduce gate friction or consult technician.
LED flasher does not operate.	Loose connection; Faulty bulb/LED; Control panel issue.	Check wiring connections; Replace flasher unit; Consult control panel manual.
Gate moves slowly or with difficulty.	Mechanical friction; Low voltage; Motor issue.	Lubricate gate hinges/moving parts; Check power supply; Contact technician.

8. Especificacions tècniques

Característica	Especificació
Product Model (Kit)	8K01MP-012 AXI20K05
Fabricant	va venir
Gate Length (Max per leaf)	2 metres
Vol. Operatiutage	24V DC
Freqüència del transmissor	433.92 MHz
Gamma de fotocèl·lules	10 metres
Component Model Number (e.g., control panel)	88001-0067 (Note: This may refer to a specific component within the kit, not the entire kit.)
Component Dimensions (e.g., control panel)	24 x 16 x 7 cm (Note: This may refer to a specific component within the kit.)
Component Weight (e.g., control panel)	240 g (Note: This may refer to a specific component within the kit.)
Piles necessàries	Yes (for transmitters)
Primera data disponible	9 de març de 2019

9. Garantia i Suport

For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact Came customer support directly. Warranty periods typically cover manufacturing defects under normal use.

For technical assistance, spare parts, or professional service, please contact your authorized Came dealer or visit the official Came website. Ensure you have your product model number and purchase date available when seeking support.

No official product videos from the seller were found in the provided data. For visual guides, please check the manufacturer's official channels or consult your installer.

	Guia de configuració ràpida del kit d'automatització de portes batents CAME ATS 8K01MP-0400 Guia completa de configuració ràpida per al kit d'automatització de portes batents CAME ATS 8K01MP-0400, que detalla la instal·lació, la posada en marxa, les funcions de seguretat i els accessoris opcionals per a sistemes de portes automatitzades.
	Guia de configuració ràpida del kit d'automatització de portes batents CAME ATS 8K01MP-0402 Aquesta guia proporciona una configuració ràpida del kit d'automatització per a portes batents CAME ATS 8K01MP-0402. Cobreix el contingut del kit, les instruccions de seguretat, la configuració típica de la porta, la geometria, l'alliberament manual, el cablejat, la informació de la targeta SIM, l'encesa, la posada en marxa mitjançant l'aplicació i el panell, les opcions de seguretat, la substitució de la SIM i els accessoris opcionals. Dissenyat per a portes de fins a 400 kg per fulla i 5 m d'amplada.
	Manual d'instal·lació del panell de control CAME ZLX24SA/ZLX24SR Manual d'instal·lació dels panells de control CAME ZLX24SA i ZLX24SR, dissenyats per a motorreductors de 24V en sistemes de portes automatitzades. Proporciona pautes de seguretat essencials, especificacions tècniques, esquemes de cablejat i instruccions de programació.
	Kit CAME ATS-P5 - Guia de configuració ràpida per a portes batents Guia completa de configuració ràpida per al kit CAME ATS-P5, que detalla la instal·lació, la seguretat, el cablejat, la programació i els accessoris per a portes batents de fins a 400 kg per fulla i 5 m d'amplada.
	Manual d'instal·lació del panell de control CAME ZLJ24 Manual d'instal·lació complet per al panell de control CAME ZLJ24, dissenyat per a operadors de portes batents de 24V CC. Cobreix les característiques tècniques, les connexions elèctriques, la programació, la seguretat i la resolució de problemes.
	Automatització de portes corredisses CAME SDN4-SDN10 - Manual d'instal·lació Manual d'instal·lació complet per als sistemes d'automatització de portes corredisses CAME SDN4, SDN6, SDN8 i SDN10, que cobreix la seguretat, la instal·lació, el cablejat, la programació i la resolució de problemes. Inclou especificacions tècniques i guia operativa.