1. Introducció
The SINOTIMER MC101-611 is a universal intelligent temperature control meter designed for precise temperature and humidity management. It features a clear LCD display for process value (PV) and set value (SV), along with various output and alarm functions. This manual provides essential information for the safe and effective operation of your device.
Figura 1.1: Frontal view of the MC101-611 Temperature Control Meter, showing the dual digital display and control buttons.
2. Informació de seguretat
- Llegiu atentament totes les instruccions abans de la instal·lació i el funcionament.
- Assegureu-vos que la font d'alimentació voltage matches the device's requirements (85-265V AC, 50/60Hz).
- All wiring should be performed by a qualified electrician to prevent electric shock or damage to the device.
- No feu servir el dispositiu en ambients amb excessiva humitat, pols o gasos corrosius.
- Desconnecteu l'alimentació abans de fer qualsevol manteniment o canvis de cablejat.
- Keep the device away from strong electromagnetic interference.
3. Característiques del producte
- Universal input for various temperature sensors (K, J, E, T, R, S, B, Pt100, Cu50).
- Dual digital display for Process Value (PV) and Set Value (SV).
- Multiple control outputs: Relay and SSR (Solid State Relay).
- Alarm functions (AL1, AL2) for high/low limits.
- PID auto-tuning function for precise control.
- Wide operating temperature range.
- Compact and easy-to-install design.
4. Contingut del paquet
- 1 x SINOTIMER MC101-611 Temperature Control Meter
- 1 x Mounting Bracket (as shown in Figure 4.1)
- 1 x Manual d'usuari (aquest document)
Figure 4.1: The MC101-611 unit alongside its included mounting bracket, essential for panel installation.
5. Configuració
5.1 Muntatge
The MC101-611 is designed for panel mounting. Cut an appropriate opening in your control panel and insert the meter. Secure it from the rear using the provided mounting bracket. Ensure a snug fit to prevent vibration.
5.2 Cablejat
Refer to the wiring diagram on the side of the unit and Figure 5.1 for correct connections. Ensure all connections are secure and insulated. Incorrect wiring can damage the device or pose a safety hazard.
- Terminals 1 i 2: AC Power Supply (85-265V AC, 50/60Hz)
- Terminals 3 i 4: Main Output (OUT) - Normally Open (NO) and Normally Closed (NC) contacts for Relay output.
- Terminals 6 i 7: Alarm Output (ALM) - Relay contacts for alarm.
- Terminals 8, 9, 10: Sensor Input (RTD/TC) - Connect your temperature sensor here. Refer to the sensor's manual for correct polarity/connection type.
- Terminals 11 i 12: SSR Output - For connecting to a Solid State Relay.
Figure 5.1: Detailed wiring diagram on the side of the MC101-611, indicating connections for power, output, alarm, and sensor input.
6. Instruccions de funcionament
6.1 Mostra finalview
The meter features a dual display:
- VA (Valor del Procés): The upper red display shows the current measured temperature/humidity.
- SV (Valor definit): The lower green display shows the desired set point.
- Indicador OUT: Illuminates when the main output is active.
- Indicador AT: Illuminates when the auto-tuning function is active.
- AL1/AL2 Indicators: Illuminate when Alarm 1 or Alarm 2 conditions are met.
6.2 Funcions dels botons
- Botó SET: S'utilitza per entrar al mode de configuració de paràmetres i confirmar les seleccions.
- < / R/S Button: Used to shift digits during setting or to reset alarms.
- ▼ (Down) Button: Decreases the value of a parameter or set point.
- ▲ (Up) Button: Increases the value of a parameter or set point.
6.3 Setting the Temperature/Humidity Set Point (SV)
- In normal operating mode, press the SET el botó una vegada. La pantalla SV començarà a parpellejar.
- Utilitza el ▲ (Amunt) i ▼ (Down) buttons to adjust the SV to your desired value. Use the < / R/S button to shift the cursor for faster adjustment.
- Premeu el botó SET de nou per confirmar el nou SV i sortir del mode de configuració.
6.4 Configuració avançada dels paràmetres
To access advanced parameters (e.g., input type, control mode, alarm settings, PID parameters), press and hold the SET button for approximately 3-5 seconds until the first parameter code appears on the PV display. Use the ▲ (Amunt) i ▼ (Down) buttons to navigate through parameters and the SET button to enter and confirm values. Refer to the detailed parameter list in the full technical manual for specific codes and their functions.
7. Manteniment
- Neteja: Netegeu la pantalla i casinNetegeu amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
- Inspecció: Comproveu periòdicament les connexions del cablejat per si hi ha fluïdesa o corrosió.
- Emmagatzematge: If storing the device for an extended period, ensure it is kept in a dry, dust-free environment within its specified storage temperature range.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla està en blanc | No power supply; Incorrect wiring; Device fault. | Comproveu les connexions d'alimentació i el volumtage; Verify wiring according to diagram; Contact support if problem persists. |
| La pantalla PV mostra 'HHHH' o 'LLLL' | Sensor open circuit (HHHH) or short circuit (LLLL); Sensor not connected; Incorrect sensor type setting. | Check sensor wiring; Ensure sensor is connected; Verify sensor type setting in parameters matches connected sensor. |
| La sortida no s'activa | SV not reached; Control mode incorrect; Output wiring issue. | Adjust SV; Check control mode (e.g., heating/cooling); Verify output wiring. |
| La lectura de la temperatura no és precisa | Sensor calibration needed; Sensor damaged; External interference. | Perform sensor calibration (if supported); Replace sensor; Relocate device away from interference sources. |
9. Especificacions
Figure 9.1: Product label on the side of the MC101-611, detailing model, range, output, and power supply specifications.
| Paràmetre | Valor |
|---|---|
| Model | MC101-611 |
| Interval | 0-1300°C K (Configurable for various sensor types) |
| Unitat de temperatura | Celsius/Fahrenheit (Selectable) |
| Sortida | Relé/SSR |
| Alarma | ALM1 |
| Subministrament Voltage | 85-265V AC, 50/60Hz |
| Tipus de visualització | LCD |
| Pes de l'article | 5.1 unces |
| Dimensions del paquet | 3.9 x 2.8 x 2.4 polzades |
10. Garantia i Suport
This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact the SINOTIMER customer service through the retailer where the product was purchased or visit the official SINOTIMER weblloc per obtenir informació de contacte.
