Introducció
This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your Wiltec 50L Air Compressor, Model 61016. Please read these instructions carefully before using the compressor and retain them for future reference.
Instruccions de seguretat
Observeu sempre les precaucions de seguretat bàsiques per reduir el risc d'incendi, descàrrega elèctrica i lesions personals.
- Llegeix totes les instruccions: Familiarize yourself with the compressor's controls and operation.
- Seguretat elèctrica: Assegureu-vos que la font d'alimentació coincideixi amb el volum del compressortage (230V). Do not operate in wet conditions.
- Equips de protecció individual (EPI): Wear safety glasses or goggles, hearing protection, and appropriate clothing.
- Ventilació: Feu funcionar el compressor en una zona ben ventilada.
- Alliberament de pressió: Always release air pressure from the tank before performing maintenance or moving the unit.
- Manteniment: Desconnecteu l'alimentació abans del servei.
- Infants i espectadors: Mantingueu els nens i els espectadors lluny del compressor en funcionament.
- Oil Lubrication: This compressor uses oil lubrication. It is not suitable for applications requiring oil-free air, such as certain painting tasks.
Producte acabatview
The Wiltec 50L Air Compressor is designed for various tasks requiring compressed air, such as powering pneumatic tools and inflating tires. It features a 50-liter tank, a 1500W motor, and is equipped with wheels and a handle for portability.
Figura 1: Part frontal view of the Wiltec 50L Air Compressor, showing the motor, tank, pressure gauges, and wheels.
Components clau:
- Tanc d'aire: 50-liter capacity for compressed air storage.
- Motor: 1500W (2 HP) electric motor.
- Interruptor de pressió: Automatically turns the compressor on/off to maintain tank pressure.
- Manòmetres: Mostra la pressió del dipòsit i la pressió de sortida regulada.
- Regulador de pressió: Ajusta la pressió de l'aire de sortida.
- Quick Connect Couplers: Per connectar mànegues d'aire i eines.
- Vàlvula de desguàs: Located at the bottom of the tank for moisture drainage.
- Rodes i mànec: Per facilitar el transport.
Figura 2: Primer pla view of the compressor's control panel, showing the pressure switch, two pressure gauges, and the red pressure regulator knob.
Configuració
- Desembalatge: Traieu amb cura el compressor del seu embalatge. Inspeccioneu-lo per si hi ha hagut danys durant l'enviament.
- Fixeu les rodes i el mànec: Securely attach the wheels and handle using the provided hardware.
- Afegir l'oli: Before first use, ensure the crankcase is filled with the appropriate compressor oil to the correct level. Refer to the oil dipstick or sight glass.
- Col·locació: Position the compressor on a stable, level surface in a well-ventilated area. Ensure adequate clearance around the unit for air circulation.
- Connexió elèctrica: Connecteu el cable d'alimentació a una presa de corrent de 230 V amb connexió a terra.
Instruccions de funcionament
- Initial Start-up (Break-in):
- Open the drain valve at the bottom of the tank.
- Enceneu el compressor.
- Allow the compressor to run for 15-20 minutes with the drain valve open to break in the motor and pump. This helps to properly seat the piston rings.
- Turn off the compressor and close the drain valve.
- Funcionament normal:
- Assegureu-vos que la vàlvula de drenatge estigui tancada.
- Connect your air tool or hose to one of the quick connect couplers.
- Turn on the compressor. It will build pressure until it reaches its maximum (8 bar / 115 psi) and then shut off automatically.
- Adjust the output pressure using the red pressure regulator knob to suit your application (e.g., 2.7 bar / 40 psi or 6.2 bar / 90 psi). The regulated pressure will be shown on one of the gauges.
- When the tank pressure drops below a certain threshold, the compressor will automatically restart to replenish the air supply.
- Apagant:
- Turn off the compressor using the power switch.
- Desconnecteu el cable d'alimentació.
- Slowly open the drain valve to release all air pressure from the tank. This prevents moisture buildup and extends tank life.
Manteniment
Regular maintenance ensures optimal performance and extends the lifespan of your compressor.
- Diari:
- Drain moisture from the air tank by opening the drain valve.
- Comproveu el nivell d'oli i afegiu-ne si cal.
- Setmanal:
- Clean the air filter. Replace if damaged or excessively dirty.
- Inspeccioneu totes les mànegues i connexions per detectar fuites.
- Monthly / Every 50 Hours:
- Change the compressor oil. Use only recommended compressor oil.
- Inspect the safety valve for proper operation.
Figure 3: Close-up of the air tank label, indicating tank capacity (50L) and pressure ratings.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El compressor no arrenca. | Sense corrent, interruptor automàtic saltat, interruptor avariat. | Check power connection, reset breaker, contact service. |
| El compressor funciona contínuament. | Air leak, faulty pressure switch, drain valve open. | Check for leaks, inspect pressure switch, close drain valve. |
| Baixa pressió d'aire. | Air leak, clogged air filter, regulator set too low. | Check for leaks, clean/replace air filter, adjust regulator. |
| Soroll o vibració excessius. | Loose components, worn parts, low oil. | Tighten fasteners, inspect for worn parts, check oil level. |
Especificacions
| Número de model | 61016 |
| Marca | WilTec |
| Poder | 1500 W (2 CV) |
| Voltage | 230 Volts |
| Velocitat | 2850 rpm |
| Capacitat del tanc d'aire | 50 litres |
| Pressió màxima de funcionament | 8 bar / 115 psi |
| Capacitat màxima de flux d'aire | 212 litres per minut |
| Nivell de soroll | 68 decibels |
| Dimensions (L x A x A) | 67 x 36 x 63 cm |
| Pes | 26.78 quilos |
| Material | Metall |
| Característica especial | Portable (with wheels and handle) |
Figura 4: lateral view of the compressor with key dimensions indicated in millimeters (e.g., 670mm length, 260mm tank diameter).
Figura 5: Frontal view of the compressor with key dimensions indicated in millimeters (e.g., 630mm height, 360mm width).
Garantia i Suport
For warranty information or technical support, please contact Wiltec customer service. Keep your purchase receipt and model number (61016) handy for faster service.
The manufacturer's return policy allows for returns within 30 days for refund or replacement. Specific details regarding warranty duration are not provided in this document; please refer to your purchase documentation or the manufacturer's official website for comprehensive warranty terms.
