Introducció
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Ferroli DIVATECH D LN C 24 Open Chamber Boiler. Please read this manual thoroughly before attempting any installation or operation. Keep this manual for future reference.
Informació de seguretat
Always adhere to local regulations and safety standards during installation and operation. Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Consult a qualified installer, service agency, or the gas supplier for information or assistance.
- Personal qualificat: La instal·lació i el manteniment només els ha de dur a terme personal qualificat i autoritzat.
- Subministrament de gas: Ensure the gas supply is turned off before any service or maintenance.
- Ventilació: This is an open chamber boiler; ensure adequate ventilation as per local codes to prevent carbon monoxide buildup.
- Pressió de l'aigua: Do not operate the boiler if the water pressure is outside the recommended range.
- Nens: Keep children away from the boiler and its controls.
Configuració i instal·lació
Installation of the Ferroli DIVATECH D LN C 24 boiler requires professional expertise. Refer to the detailed installation guide provided separately with the product for specific instructions regarding plumbing, gas connection, electrical wiring, and flue system setup.
Comprovacions prèvies a la instal·lació:
- Verify that the boiler model matches the gas type available (methane).
- Ensure the installation site meets all ventilation and space requirements.
- Check the integrity of the packaging and the boiler for any transport damage.
Mounting the Boiler:
The boiler should be securely mounted on a solid wall capable of supporting its weight (27 kg). Use appropriate wall fixings. Ensure the boiler is level to guarantee proper operation and drainage.
Figura 1: Davant view of the Ferroli DIVATECH D LN C 24 Open Chamber Boiler. The boiler is white with a grey control panel located at the bottom right, featuring a digital display and pressure gauge. The Ferroli logo is visible above the control panel.
Instruccions de funcionament
Posada en marxa inicial:
- Ensure all gas, water, and electrical connections are secure and leak-free.
- Obriu la vàlvula principal de gas.
- Fill the heating system with water until the pressure gauge reads between 1 and 1.5 bar. Bleed air from the system.
- Turn on the electrical supply to the boiler.
- Set the boiler to heating mode using the control panel.
Funcionament diari:
- Ajust de temperatura: Use the temperature control knobs on the front panel to set the desired heating and domestic hot water temperatures.
- Monitorització de la pressió: Regularly check the system pressure on the gauge. If it drops below 1 bar, repressurize the system.
- Codis d'error: The digital display will show error codes if a fault occurs. Refer to the troubleshooting section for common codes.
Manteniment
Regular maintenance is crucial for the longevity and efficient operation of your boiler. It is recommended to have the boiler serviced annually by a qualified technician.
Manteniment de l'usuari:
- Neteja: Wipe the exterior of the boiler with a soft, damp tela. No utilitzeu netejadors abrasius.
- Control de pressió: Monitor system pressure weekly.
- Ventilació: Ensure that the area around the boiler is clear and ventilation openings are not obstructed.
Manteniment professional:
- Annual inspection and cleaning of the heat exchanger and burner.
- Comprovació i ajust de la pressió del gas.
- Verification of safety devices and controls.
- Flue gas analysis.
Resolució de problemes
Before calling for service, consult the following table for common issues and their solutions. For persistent problems or issues not listed, contact a qualified technician.
| Problema | Causa possible | Solució |
|---|---|---|
| No heating/hot water | Baixa pressió del sistema | Repressurize the system to 1-1.5 bar. |
| No heating/hot water | Subministrament de gas desactivat | Check if the main gas valve is open. |
| Boiler lockout/Error code | Falla d’encesa | Reset the boiler. If it persists, call a technician. |
| La caldera fa sorolls estranys | Air in the system / Limescale buildup | Bleed radiators. For limescale, professional descaling is required. |
Especificacions
- Marca: Ferroli
- Número de model: 500001
- Dimensions del producte (L x A x A): 5.99 x 13.51 x 5.99 cm (aprox. 2.36 x 5.32 x 2.36 polzades)
- Pes: 27 quilograms (aprox. 59.5 lliures)
- Material: 18/8 stainless steel (internal components, where applicable)
- Tipus: Open Chamber Boiler
- Tipus de combustible: metà (gas natural)
- ASIN: B07PX285Y8
- Primera data disponible: 30 de març de 2019
Garantia i Suport
For warranty information, please refer to the warranty card included with your product or contact Ferroli customer service. Keep your proof of purchase for warranty claims.
For technical support, spare parts, or to schedule professional service, please contact your authorized Ferroli dealer or visit the official Ferroli website. Always provide your model number (500001) and serial number when seeking support.
Vídeos de productes
No official product videos from the seller were found to be relevant for inclusion in this manual.
