Introducció
This manual provides instructions for the Altec Lansing IMW396 Aqua Bliss Voice Bluetooth Speaker. Please read this manual thoroughly before using the device to ensure proper operation and to understand its features, including its IPX6 water resistance, 5-hour battery life, and voice assistant integration.
Què hi ha a la caixa
- Altaveu Bluetooth Altec Lansing IMW396 Aqua Bliss Voice
- Cable de càrrega micro USB
Image: The Altec Lansing IMW396 Aqua Bliss Voice Bluetooth Speaker in aqua blue and white, shown alongside its black Micro USB charging cable.
Controls i característiques
The Altec Lansing IMW396 Aqua Bliss Voice speaker features intuitive controls located on its front surface. These controls manage power, volume, track navigation, and voice assistant functions.
- Power Button (Center Top): Press and hold to power the speaker on or off. A short press will play or pause music.
- Minus Button (Center Bottom): Short press to decrease volume. Press and hold to navigate to the previous track.
- Plus Button (Top): Short press to increase volume. Press and hold to navigate to the next track.
- Phone Button (Center): Press to activate the voice assistant (Siri or Google Assistant) or to answer/end calls.
Imatge: Una imatge detallada view of the Altec Lansing IMW396 speaker's control panel, showing the power, volume, and phone buttons.
Configuració
Carregant l'altaveu
Before initial use, fully charge your Aqua Bliss Voice speaker. Locate the USB charging port on the side of the speaker, protected by a rubber flap. Open the flap and insert the Micro USB charging cable. Connect the other end of the cable to a power source (e.g., a computer USB port or a USB wall adapter). A red LED light on the speaker's front will illuminate during charging. Once fully charged, the red LED will turn off. A full charge typically takes 1 to 2 hours. It is recommended to use the provided charging cable and a standard USB power adapter.
Imatge: Lateral view of the Altec Lansing IMW396 speaker, showing the Micro USB charging port with its protective rubber cover open.
Emparellament Bluetooth
- Ensure your speaker is fully charged.
- Power on the speaker by pressing and holding the Power button for 3-5 seconds. You will hear an audible "Powering on, welcome to Altec Lansing" prompt, and the LED will flash red and blue, indicating it's in pairing mode.
- Al dispositiu mòbil (telèfon intel·ligent, tauleta, etc.), activeu el Bluetooth i cerqueu els dispositius disponibles.
- Select "Aqua Bliss Voice" from the list of available devices.
- Once successfully paired, you will hear a confirmation tone, and the LED indicator will turn solid blue.
Instruccions de funcionament
Reproducció de música
- Reproduir/pausa: Premeu breument el botó d'engegada.
- Pujar el volum: Short press the Plus (+) button.
- Baixar el volum: Short press the Minus (-) button.
- Pista següent: Press and hold the Plus (+) button.
- Pista anterior: Press and hold the Minus (-) button.
Voice Assistant (Just Ask)
The "Just Ask" feature allows you to access your smartphone's voice assistant (Siri or Google Assistant) directly through the speaker.
- Ensure your speaker is paired with your smartphone.
- Press the Phone button to activate your device's voice assistant.
- Speak your command clearly into the speaker's microphone.
Contestar/acabar trucades
- When a call comes in, press the Phone button to answer.
- To end a call, press the Phone button again.
Video: This video demonstrates the basic functions of the Altec Lansing IMW396 Aqua Bliss Voice speaker, including powering on, adjusting volume, and using the voice assistant feature.
Water Resistance (IPX6 Rated)
The Altec Lansing IMW396 Aqua Bliss Voice speaker is designed with an IPX6 water resistance rating. This means it is protected against powerful water jets from any direction. It is suitable for use in showers, by the pool, or in other wet environments. Ensure the USB charging port cover is securely closed before exposing the speaker to water.
Image: The Altec Lansing IMW396 speaker hanging from a showerhead, demonstrating its water-resistant design during use.
Manteniment
- Netegeu l'altaveu amb un suau, damp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
- Ensure the USB port cover is always securely closed when not charging to maintain water resistance.
- Guardeu l'altaveu en un lloc fresc i sec quan no l'utilitzeu durant períodes prolongats.
- Eviteu exposar l'altaveu a temperatures extremes.
Resolució de problemes
| Problema | Solució |
|---|---|
| L'altaveu no s'encén. | Ensure the speaker is fully charged. Press and hold the Power button for 3-5 seconds. |
| No es pot emparellar amb un dispositiu Bluetooth. | Make sure the speaker is in pairing mode (flashing red and blue LED). Ensure Bluetooth is enabled on your device and it is within range (up to 30 feet). Try unpairing and re-pairing the device. |
| Sense so o amb un volum baix. | Increase the volume on both the speaker and your connected device. Ensure the speaker is properly paired. |
| L'assistent de veu no respon. | Ensure the speaker is paired with your smartphone and the voice assistant feature is enabled on your phone. Speak clearly into the speaker's microphone. |
| La bateria s'esgota ràpidament. | Ensure the speaker is fully charged before use. Battery life is approximately 5 hours. |
Especificacions
- Nom del model: IMW396
- Marca: Altec Lansing
- Tecnologia de connectivitat: Sense fil (Bluetooth)
- Interval sense fil: Fins a 30 peus
- Classificació de resistència a l'aigua: IPX6 (impermeable)
- Durada de la bateria: Fins a 5 hores
- Font d'alimentació: Funciona amb bateria (1 bateria d'ions de liti inclosa)
- Mètode de control: Veu, botons
- Dispositius compatibles: Telèfon intel·ligent, tauleta, ordinador portàtil
- Pes de l'article: 9.6 unces
- Dimensions del paquet: 8.9 x 5.71 x 2.44 polzades
- UPC: 021331640413
Informació de la garantia
The Altec Lansing IMW396 Aqua Bliss Voice Bluetooth Speaker comes with a 1-Year Limited Warranty. For specific terms and conditions, please refer to the warranty card included with your product or visit the official Altec Lansing weblloc.
Atenció al client
For further assistance, technical support, or warranty claims, please contact Altec Lansing customer service. You can find contact information on the official Altec Lansing weblloc o a l'embalatge del producte.
