Introducció
This manual provides detailed instructions for the safe and proper installation and use of your PERLESMITH PSML1-E TV Wall Mount. Please read all instructions carefully before beginning installation. If you have any questions, contact PERLESMITH customer support.
Informació de seguretat
ADVERTIMENT: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding your warranty. Do not install this product on plasterboard, hollow walls, drywall, or soft walls. Only install on solid concrete walls, brick walls, or solid wood stud walls.
- Assegureu-vos que la superfície de muntatge pugui suportar amb seguretat el pes combinat del suport i del televisor.
- No supereu la capacitat màxima de pes de 52 kg (114 lliures).
- Aquest suport està dissenyat per a televisors d'entre 26 i 75 polzades.
- Feu servir l'equip de seguretat adequat durant la instal·lació, inclosa la protecció ocular.
- Feu servir sempre un localitzador de muntants de fusta per localitzar-los amb precisió.
- Si no esteu segurs de cap part de la instal·lació, busqueu ajuda professional.
Image: Diagram highlighting the robust construction and 52kg weight capacity of the PERLESMITH TV mount, featuring secure dual hooks and a 3-layer solid steel plate.
Comprovació de compatibilitat
Before installation, verify the following:
- Mida del televisor: Your TV must be between 26 and 75 inches.
- Pes del televisor: Your TV must weigh no more than 52 kg (114 lbs).
- Patró VESA: Check the four mounting holes on the back of your TV. The VESA pattern (horizontal x vertical) must be within the range of 75x75 mm to 400x400 mm. Compatible VESA patterns include: 75x75, 100x100, 200x100, 200x200, 200x300, 200x400, 300x200, 300x300, 400x200, 400x300, 400x400 mm.
- Tipus de paret: The mount is suitable for solid concrete walls, brick walls, or solid wood stud walls. Do NOT install on plasterboard, hollow walls, drywall, or soft walls.
Image: Diagram illustrating how to check TV VESA pattern, weight, size, and suitable wall types for installation.
Image: VESA compatibility diagram, illustrating the range of VESA patterns supported by the mount, from 75x75mm up to 400x400mm.
Contingut del paquet
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or defective, contact PERLESMITH customer support.
Image: Main components of the PERLESMITH TV Wall Mount, showing the wall plate and the two vertical TV brackets.
El paquet normalment inclou:
- Placa de paret
- Suports per a TV (2 unitats)
- Assorted TV Screws (M4, M6, M8)
- Espaciadors i volanderes
- Wall Mounting Hardware (Lag bolts, concrete anchors)
- Level (for some kits)
- Manual d'instruccions
Configuració i instal·lació
Follow these steps for a secure installation. A quick installation can be completed in approximately 15 minutes with proper tools and preparation.
Pas 1: connecteu els suports del televisor al televisor
- Col·loqueu amb cura el televisor cara avall sobre una superfície suau i neta per evitar ratllades.
- Identify the correct diameter and length of screws for your TV's VESA mounting holes. Use spacers if the TV back is uneven or if cables need clearance.
- Attach the two vertical TV brackets to the back of your TV using the selected screws and washers. Ensure the brackets are centered and securely tightened. The hooks on the brackets should face downwards.
Image: Step 1 of the installation process, showing the TV brackets being attached to the back of the television.
Pas 2: Muntar la placa de paret a la paret
- Determine the desired height for your TV. Mark the location for the wall plate on the wall.
- For wood stud installation: Use a stud finder to locate the center of the wood studs. Mark the drilling points. Drill pilot holes (recommended size specified in manual, typically 5.5mm/7/32"). Secure the wall plate using lag bolts and washers.
- For concrete/brick wall installation: Use the wall plate as a template to mark drilling points. Drill holes (recommended size specified in manual, typically 10mm/3/8"). Insert concrete anchors into the drilled holes. Secure the wall plate using lag bolts and washers.
- Use a level to ensure the wall plate is perfectly horizontal before tightening all bolts.
Pas 3: Pengeu el televisor a la placa de paret
- Amb ajuda, aixequeu amb cura el televisor amb els suports adjunts.
- Align the hooks on the TV brackets with the top edge of the wall plate. Gently lower the TV, ensuring the brackets engage securely with the wall plate.
- Engage the safety locks (if present) on the bottom of the TV brackets to prevent accidental dislodgement.
Image: A person completing the final step of hanging the TV onto the wall mount, illustrating the quick installation process.
Image: Detail of the safety lock mechanism, which secures the TV brackets to the wall plate.
Imatge: Primer pla view of the anti-drop design, ensuring the TV remains securely attached to the mount.
Instruccions de funcionament
The PERLESMITH PSML1-E is a fixed TV wall mount. Once installed, the TV will remain in a static position, close to the wall (approximately 30 mm distance). This design provides a sleek, low-profile aparença.
Image: A television mounted on the wall, demonstrating the minimal 30mm distance from the wall for a low-profile mira.
While the mount is fixed, some models may allow for a slight tilt adjustment up to 8 degrees. Refer to your specific product's features for tilt adjustment capabilities. To adjust, loosen the tilt bolts on the TV brackets, set the desired angle, and re-tighten the bolts securely.
Manteniment
Regular maintenance ensures the longevity and safety of your TV wall mount.
- Inspecció periòdica: Annually check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
- Neteja: Wipe the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Comprovació de danys: Inspect the mount for any signs of wear, corrosion, or damage. If damage is found, do not use the mount and contact customer support.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El televisor no està anivellat després de la instal·lació. | Placa de paret no anivellada durant la instal·lació. | Carefully remove the TV. Loosen the wall plate bolts, adjust with a level, and re-tighten. Re-hang the TV. |
| El televisor no encaixa amb el suport. | Patró VESA o mida/pes del televisor incorrectes. | Verify TV specifications against the mount's compatibility (VESA, size, weight). Ensure correct screws and spacers are used. |
| La muntura sembla inestable. | Improper wall installation or loose fasteners. | Immediately remove the TV. Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure installation on a suitable wall type (solid concrete, brick, or wood stud). If unsure, consult a professional. |
| Cables are pinched or difficult to connect. | Insufficient space between TV and wall. | Ensure spacers are used if needed to provide adequate clearance for cables. Re-route cables carefully. |
Especificacions
- Model: PSML1-E
- Marca: PERLESMITH
- Material: Acer d'aliatge
- Color: Negre
- Tipus d'instal·lació: Muntatge de paret
- Tipus de moviment: Arreglat
- Mides de TV compatibles: 26 - 75 polzades
- Capacitat de pes màxim: 52 kg (114 lliures)
- Compatibilitat VESA: 75x75mm, 100x100mm, 200x100mm, 200x200mm, 200x300mm, 200x400mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm
- Distància des de la paret: Aproximadament 30 mm
- Angle d'inclinació màxim: 8 Degrees (if applicable to specific unit)
- Pes de l'article: 1.12 quilos
- Dimensions del paquet: 43.7 x 11.3 x 4.9 cm
- UPC: 713721601516
Garantia i Suport
PERLESMITH products are designed for durability and reliability. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official PERLESMITH weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
