BOYA RX8Pro Professional Wireless Dual Receiver User Manual
Model: RX8PRO
1. Introducció
The BOYA RX8Pro is a professional UHF dual-channel wireless receiver designed for use with DSLR cameras, mirrorless cameras, and video cameras. It offers reliable audio reception for various professional recording scenarios, including interviews and field recordings. This receiver is built with an all-metal construction for durability and features an intuitive interface for ease of use.
2. Producte acabatview
Figura 1: Davant view of the BOYA RX8Pro Wireless Dual Receiver. It features two flexible antennas, a display screen showing channel information, and control buttons. The BOYA logo is visible at the bottom.
Característiques principals:
- Dual-channel receiver for simultaneous operation of two transmitters.
- 48 selectable UHF channels for interference-free operation.
- 3.5mm locking mini-jack output for secure connection to cameras.
- 3.5mm headphone output for real-time audio monitoring.
- All-metal construction for robust durability.
- LCD display for channel and battery status indication.
- Alimentat per dues piles AA.
3. Guia de configuració
3.1. Instal·lació de la bateria
- Locate the battery compartment on the rear of the RX8Pro receiver.
- Feu lliscar la tapa de la bateria.
- Introduïu dues piles AA, assegurant-vos de la polaritat correcta (+/-).
- Tanqueu la tapa de la bateria amb seguretat.
3.2. Muntatge del receptor
The RX8Pro includes a detachable shoemount adapter for easy attachment to a camera's hot shoe or cold shoe mount.
- Attach the shoemount adapter to the bottom of the receiver.
- Slide the receiver with the shoemount into your camera's hot shoe.
- Tighten the locking wheel on the shoemount to secure the receiver.
- Alternatively, use the belt clip for attaching to clothing or a belt.
3.3. Connexió a la càmera
Use the provided cables to connect the receiver to your recording device.
- For DSLR/Mirrorless Cameras: Use the locking 3.5mm to 3.5mm cable. Connect one end to the RX8Pro's "OUTPUT" jack and the other end to your camera's microphone input.
- For Professional Camcorders/Mixers: Use the locking 3.5mm mini-jack to XLR cable. Connect the 3.5mm end to the RX8Pro's "OUTPUT" jack and the XLR end to your device's XLR input.
4. Instruccions de funcionament
4.1. Encès / apagat
Locate the power switch on the side panel of the receiver. Slide it to the "ON" position to power on the device. Slide it to "OFF" to power down.
4.2. Selecció de canals
The RX8Pro features 48 selectable UHF channels. Ensure the receiver and transmitter (sold separately) are set to the same channel to establish a connection.
- Press the "SET" button to enter the channel selection mode.
- Use the "+" or "-" buttons to cycle through available channels.
- Press "SET" again to confirm your selection.
- Observe the "LINK" indicator on the receiver; it should illuminate when a successful connection with a transmitter is established.
4.3. Audio Monitoring
Connect headphones to the 3.5mm headphone output jack on the receiver to monitor audio in real-time. This allows you to verify audio quality and levels during recording.
4.4. Ajust del nivell de sortida
Adjust the output level of the receiver to match the input sensitivity of your camera or recording device. Refer to your camera's manual for optimal audio input settings.
5. Manteniment
- Keep the receiver dry. Do not expose it to water or excessive humidity.
- Netegeu el dispositiu amb un drap suau i sec. Eviteu utilitzar productes químics agressius o netejadors abrasius.
- Traieu les piles si no heu d'utilitzar el dispositiu durant un període prolongat per evitar fuites.
- Guardeu el receptor en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense sortida d'àudio |
|
|
| Estàtica o interferència |
|
|
| La pantalla LCD no funciona |
|
|
7. Especificacions
| Marca | BOYA |
| Número de model | RX8PRO |
| Dimensions del producte | 2.6 x 1.6 x 1 polzades |
| Pes de l'article | 9.1 unces |
| Tecnologia de connectivitat | XLR |
| Tipus de connector | XLR Connector, 3.5mm Jack |
| Mode de sortida d'àudio | estèreo |
| Configuració del canal de so envoltant | Canal 2 |
| Color | Negre |
| Fabricant | Boya |
| Data de primera disponibilitat | 3 de juny de 2019 |
8. Què hi ha a la caixa
- 1 x RX8Pro Professional Wireless Dual Receiver
- 1 x Clip de cinturó
- 1 x Locking 3.5mm Mini-Jack to XLR Cable
- 1 x Locking 3.5mm to 3.5mm Cable
- 1 x Detachable Shoemount Adapter
- Manual d'usuari (aquest document)
9. Garantia i Suport
For warranty information and technical support, please refer to the official BOYA weblloc web o poseu-vos en contacte amb el vostre distribuïdor local. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
BOYA Official Weblloc: www.boya-mic.com
