Seilylanka 24V 3000mAh Ni-MH Battery Pack for Parkside X24V-1 KH3170-1 Self-Installation Manual

1. Introducció

This manual provides essential instructions for the safe and effective self-installation, operation, and maintenance of your Seilylanka 24V 3000mAh Ni-MH Battery Pack, compatible with Parkside X24V-1 / KH3170-1 24 Volt tools. Please read this manual thoroughly before proceeding with installation to ensure proper function and safety.

2. Instruccions de seguretat

ADVERTIMENT: Improper handling of battery packs can lead to fire, explosion, electric shock, or other hazards. Always follow these safety guidelines:

Always wear appropriate personal protective equipment, including safety glasses and gloves, when handling battery cells or packs.
Do not short-circuit the battery terminals. This can cause severe burns and damage the battery.
Do not disassemble, crush, puncture, or modify the battery pack.
Do not expose the battery pack to water, rain, or excessive moisture.
Do not expose the battery pack to fire or high temperatures (above 60°C / 140°F).
Mantingueu la bateria allunyada dels nens i de les mascotes.
Only use chargers specified for Ni-MH batteries.
Dispose of spent batteries according to local regulations. Do not dispose of in household waste.
Assegureu-vos una ventilació adequada durant la càrrega i el funcionament.
If the battery pack shows signs of damage, overheating, or leakage, discontinue use immediately and dispose of it safely.

3. Producte acabatview

The Seilylanka 24V 3000mAh Ni-MH Battery Pack is designed for self-installation into compatible Parkside 24V power tools, specifically models X24V-1 and KH3170-1. This pack consists of 20 individual Sub C Ni-MH cells, each approximately 44x22mm, configured to deliver 24 Volts and a capacity of 3000 Milliamphores abans (mAh).

Seilylanka 24V Ni-MH Battery Pack, top-down view showing individual cells and connection tabs

Figura 3.1: De dalt a baix view of the Seilylanka 24V Ni-MH battery pack, illustrating the arrangement of the 20 Sub C cells with their connection tabs.

Seilylanka 24V Ni-MH Battery Pack, side view showing stacked cells

Figura 3.2: lateral view of the Seilylanka 24V Ni-MH battery pack, showing the stacked configuration of the individual Sub C cells.

Seilylanka 24V Ni-MH Battery Pack, angled view showing cell connections

Figura 3.3: Angle view of the Seilylanka 24V Ni-MH battery pack, highlighting the metal connection tabs between cells.

Figura 3.4: global view of the Seilylanka 24V Ni-MH battery pack, including the Seilylanka brand logo.

4. Self-Installation Guide

This battery pack is intended for self-installation, requiring careful disassembly of your existing tool battery casing and proper reassembly with the new cells. This process requires technical skill and appropriate tools. If you are not confident in your ability to perform this installation, seek assistance from a qualified technician.

4.1 Eines necessàries (no incloses)

Screwdriver set (to open the tool battery casing)
Soldering iron and solder (for connecting battery terminals)
Talladors/pellaferros
Multimeter (for checking voltage i polaritat)
Heat shrink tubing or electrical tape (for insulation)
Guants i ulleres de seguretat

4.2 Passos d'instal·lació

Preparar l'espai de treball: Ensure a clean, well-lit, and static-free workspace. Have all necessary tools ready.
Disassemble Old Battery: Obriu amb cura la casing of your existing Parkside 24V battery pack. Note the arrangement and polarity of the old cells before removal. Take photos for reference if needed.
Remove Old Cells: Desolder or carefully disconnect the old battery cells from the internal wiring and terminals. Dispose of old batteries responsibly.
Inspect New Pack: Verify that the new Seilylanka battery pack matches the configuration and dimensions required for your tool's casing.
Connect New Pack: Carefully solder the new battery pack's terminals to the tool's internal wiring, ensuring correct polarity (+ to + and - to -). Double-check all connections for secure and clean solder joints. Incorrect polarity can damage the battery, tool, or charger.
Connexions aïllades: Use heat shrink tubing or electrical tape to insulate all exposed solder joints and connections to prevent short circuits.
Prova Voltage: Abans de tancar la casing, use a multimeter to verify the total voltage of the assembled battery pack. It should read approximately 24 Volts.
Remunta Casing: Carefully place the new battery pack into the tool's casing, ensuring no wires are pinched. Close and secure the casing.
Càrrec inicial: Fully charge the newly installed battery pack using a compatible Ni-MH charger before first use.

5. Funcionament

5.1 Càrrega

Use only a charger specifically designed for 24V Ni-MH battery packs. Using an incompatible charger can damage the battery and pose a safety risk.
Assegureu-vos que la bateria estigui ben inserida al carregador.
Monitor the charging process. Do not leave charging batteries unattended for extended periods.
The battery pack may become warm during charging; this is normal. However, excessive heat indicates a problem.
Allow the battery to cool down before use if it becomes very warm after charging.

5.2 Discharging and Use

Insert the fully charged battery pack into your compatible Parkside 24V power tool.
Operate the tool as per its own instruction manual.
Avoid completely draining the battery pack. Ni-MH batteries benefit from being recharged before they are fully depleted, though occasional full discharge can help prevent memory effect.
If the tool's performance noticeably decreases, it's time to recharge the battery.

6. Manteniment

6.1 Neteja

Keep the battery pack and its terminals clean and free from dirt, dust, and moisture.
Use a dry, soft cloth to wipe the battery pack. Do not use solvents or abrasive cleaners.

6.2 Emmagatzematge

Guardeu la bateria en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
For long-term storage, charge the battery pack to approximately 40-60% capacity.
Recharge the battery pack every 3-6 months during long-term storage to prevent deep discharge and maintain cell health.

7. Solució De Problemes

Problema	Causa possible	Solució
La bateria no es carrega	Incorrect charger used Poor connection to charger Damaged battery terminals Error de la bateria	Ensure charger is compatible with 24V Ni-MH batteries. Check for secure connection between battery and charger. Inspect terminals for damage; clean if necessary. If issues persist, the battery pack may be faulty and require replacement.
Tool not operating or weak performance	La bateria no està completament carregada Poor connection to tool Error de la bateria Tool fault	Carregueu completament la bateria. Ensure the battery pack is correctly inserted into the tool. Check battery terminals for cleanliness and damage. Test the tool with a known good battery, if available.
Battery pack overheating during charge/discharge	Carregador defectuós Damaged battery cells Sobrecarregar l'eina	Deixeu d'utilitzar immediatament. Use a different, compatible charger. If overheating persists, the battery pack may be damaged and should be safely disposed of. Avoid continuously overloading the power tool.

8. Especificacions

Característica	Detall
Marca	Seily Lanka
Número de model	X24V-1 / KH3170-1 (for Parkside tools)
Tipus de bateria	Ni-MH (hidrur de níquel-metall)
Voltage	24 Volts
Capacitat	3000 mAh (Milliampaquesta hora)
Configuració cel·lular	20x Sub C cells
Approx. Cell Dimensions	44mm x 22mm (per cell)
Ús recomanat	Power Tool Battery Replacement
Pes de l'article	Aproximadament 1 kg

9. Garantia i Suport

For specific warranty information regarding your Seilylanka battery pack, please refer to the purchase documentation or contact your retailer. As this product is designed for self-installation, the warranty may be affected by improper installation. Always retain your proof of purchase.

For technical support or inquiries, please contact Seilylanka customer service through the vendor from whom you purchased the product.

	Harbor Breeze LED Path Light (1-Pack) - Model #10842 - Installation & Care Guide Official installation, troubleshooting, and care guide for the Harbor Breeze LED Path Light (1-Pack), Model #10842. Learn how to set up, maintain, and get the most out of your solar path lights.
	Carregador de bateria XTAR SC1 Plus: Càrrega ràpida de Li-ion i Ni-MH i funcionalitat de banc d'energia The XTAR SC1 Plus is a versatile and speedy charger for Li-ion and Ni-MH batteries, also serving as a portable power bank. Featuring Type-C input, it supports various battery sizes including protected 26800 cells, and offers LED indicators for status, a 12-month warranty, and anti-fake verification.
	DN4 1.2V LCD Ni-MH Smart Battery Charger - Yonii User Manual User manual for the Yonii DN4 1.2V LCD Ni-MH Smart Battery Charger. Features 4 independent slots, Type-C interface, and supports Ni-MH/Ni-Cd AA/AAA batteries. Includes specifications, operation guide, and safety cautions.
	ALL8 Intelligent Eight Slot LCD Battery Charger User Manual User manual for the Yonii ALL8 Intelligent Eight Slot LCD Battery Charger. This document details specifications, features, usage instructions, and safety warnings for charging 1.2V Ni-MH/Ni-CD AAAA and 1.5V Li-ion AAAAA batteries using Type-C input.
	Congdi Intelligent Battery Charger for AA/AAA NiMH/NiCd Batteries - User Guide Specifications and usage instructions for the Congdi intelligent battery charger. Supports 1.2V NiMH/NiCd AA/AAA rechargeable batteries via Type-C or Micro USB input. Important notes on charging pairs and battery types.
	Solar Cell Lighting User Manual: Installation, Use, and Maintenance Guide Comprehensive guide for Solar Cell Lighting products, covering safety instructions, technical specifications, assembly steps, usage tips, and battery replacement. Learn how to install and maintain your solar lamp per a un rendiment òptim.

Seilylanka X24V-1 KH3170-1